Harvest

Tobacco is harvested 70 to 130 days after transplanting by one of two methods: (1) the entire plant is cut and the stalk split or speared and hung on a tobacco stick or lath, or (2) the leaves are removed at intervals as they mature. The leaves of cigar-wrapper and aromatic tobaccos are strung using a needle, and leaves to be flue-cured are looped, using a string tied to a lath or stick that is hung in a curing barn. To prevent breakage and bruising during the handling necessary in curing, it is desirable for the leaf to wilt without sunburning. Tobacco may be left in the field from a few hours to two days to wilt.

Curing

The three most common methods of curing are by air, fire, and flue. A fourth method, sun curing, is practiced with aromatic types and to a limited extent with air-cured types. Curing entails four essential steps: wilting, yellowing, colouring, and drying. These involve physical and chemical changes in the leaf and are regulated to develop the desired properties. Air curing is accomplished mainly by mechanical ventilation inside buildings. Coke, charcoal, or petroleum gas may be burned to provide heat when conditions warrant. Air curing, which requires from one to two months’ time, is used for many tobaccos, including dark air-cured types, cigar, Maryland, and Burley.

The fire-curing process resembles air curing except that open wood fires are kindled on the floor of the curing barn after the tobacco has been hanging for two to six days. The smoke imparts to the tobacco a characteristic aroma of creosote. The firing process may be continuous or intermittent, extending from three weeks to as long as 10 weeks until curing is complete and the leaf has been cured to the desired finish.

The barns for flue curing are usually small and tightly constructed with ventilators and metal pipes, or flues, extending from furnaces around or under the floor of the barn. Fuels used are wood, coal, oil, and liquid petroleum gas. If oil or gas heaters are used, flues are not needed. Heat is applied carefully, and the leaves are observed closely for changes in their chemical and physical composition. Flue curing requires from four to eight days’ time and is used for Virginia, or bright, tobacco. In the process called bulk curing, the leaves are loaded evenly in racks arranged in a curing chamber.

Grading

After curing, the leaf may be piled in bulk to condition for a time before it is prepared for sale. The preparation consists usually of grading the leaf and putting it in a bale or package of convenient size and weight for inspection and removal by the buyer. Except during humid periods, the leaf must be conditioned in moistening cellars or humidified rooms before it can be handled without breakage. Type of leaf and local custom determine the fineness of grading. At its most elaborate, grading may be by position of the leaf on the plant, colour, size, maturity, soundness, and other recognizable qualities; flue-cured tobacco in the United States is graded that way, and each grade is bulked or baled separately. Much simpler grading is usual in developing countries, where the buyer is as much concerned with the proportions of each grade as with the quality of the entire lot; aromatic tobaccos are an example of this. Most tobaccos entering world trade, except the aromatic, are assembled before sale into bundles, or hands, of 15 to 30 leaves and tied with one leaf wrapped securely around the butts.

Most tobaccos, except aromatic and cigar, are regraded if necessary and usually redried after purchase; then the exact amount of moisture needed for aging is added and the tobacco is securely packed in cases or hogsheads. Exported tobacco is shipped in this form. The trend is for the packing factories to stem the leaf—that is, remove most of the stem leaving the lamina (leaf blade)—usually by threshing machines but sometimes by hand, before redrying it. The aging process, particularly with cigar tobaccos, is sometimes hastened by forced fermentation procedures. After purchase, aromatic tobaccos are manipulated; that is, they are factory-graded, baled, and subjected to an elaborate in-the-bale fermentation process before going to the ultimate manufacturer.