centrifugal force, a fictitious force, peculiar to a particle moving on a circular path, that has the same magnitude and dimensions as the force that keeps the particle on its circular path (the centripetal force) but points in the opposite direction.
A stone whirling in a horizontal plane on the end of a string tied to a post on the ground is continuously changing the direction of its velocity and, therefore, has an acceleration toward the post. This acceleration is equal to the square of its velocity divided by the length of the string. According to Newton’s second law, an acceleration is caused by a force, which in this case is the tension in the string. If the stone is moving at a constant speed and gravity is neglected, the inward-pointing string tension is the only force acting on the stone. If the string breaks, the stone, because of inertia, will keep on going in a straight line tangent to its previous circular path; it does not move in the outward direction as it would if the centrifugal force were real.
Although it is not a real force according to Newton’s laws, the centrifugal-force concept is a useful one. For example, when analyzing the behaviour of the fluid in a cream separator or a centrifuge, it is convenient to study the fluid’s behaviour relative to the rotating container rather than relative to the Earth; and, in order that Newton’s laws be applicable in such a rotating frame of reference, an inertial force, or a fictitious force (the centrifugal force), equal and opposite to the centripetal force, must be included in the equations of motion. In a frame of reference attached to the whirling stone, the stone is at rest; to obtain a balanced force system, the outward-acting centrifugal force must be included.
Centrifugal force can be increased by increasing either the speed of rotation or the mass of the body or by decreasing the radius, which is the distance of the body from the centre of the curve. Increasing the mass or decreasing the radius increases the centrifugal force in direct or inverse proportion, respectively, but increasing the speed of rotation increases it in proportion to the square of the speed; that is, an increase in speed of 10 times, say from 10 to 100 revolutions per minute, increases the centrifugal force by a factor of 100. Centrifugal force is expressed as a multiple of g, the symbol for normal gravitational force (strictly speaking, the acceleration due to gravity). Centrifugal fields of more than 1,000,000,000g have been produced in the laboratory by devices called centrifuges.