neoprene

neoprene (CR), synthetic rubber produced by the polymerization (or linking together of single molecules into giant, multiple-unit molecules) of chloroprene. A good general-purpose rubber, neoprene is valued for its high tensile strength, resilience, oil and flame resistance, and resistance to degradation by oxygen and ozone; however, its high cost limits its use to special-properties applications.

One of the first sucessful synthetic rubbers, polychloroprene was first prepared in 1930 by Arnold Collins, an American chemist in Wallace Hume Carothers’s research group at E.I. du Pont de Nemours & Company (now DuPont Company), while investigating by-products of divinylacetylene. DuPont marketed the material as Neoprene, a trademarked name that has since become generic.

Chloroprene (also known as 2-chlorobutadiene) is a colourless, toxic, flammable liquid with the following chemical formula:

It was formerly prepared by treating acetylene with cuprous chloride to form monovinyl acetylene, which was treated in turn with hydrochloric acid to yield chloroprene. In modern production it is obtained by the chlorination of butadiene or isoprene. In order to process chloroprene into rubber, it is emulsified in water and then polymerized through the action of free-radical initiators. In the resultant polymer chain, the chloroprene repeating unit can adopt a number of structures; the most common is trans-polychloroprene, which can be represented as follows:

This polymer tends to crystallize and harden slowly at temperatures below about 10 °C (50 °F). It also crystallizes on stretching, so cured components are strong even without the addition of fillers such as carbon black. Because the double bond between the carbon atoms is shielded by the pendant atoms and CH₂ groups, the molecular interlinking necessary for vulcanizing the polymer to a cured rubber is usually effected through the chlorine atom. The presence of chlorine in the molecular structure causes this elastomer to resist swelling by hydrocarbon oils, to have greater resistance to oxidation and ozone attack, and to possess a measure of flame resistance. Principal applications are in products such as wire and cable insulation, hoses, belts, springs, flexible mounts, gaskets, and adhesives, where resistance to oil, heat, flame, and abrasion are required.