parallel circuit
parallel circuit, an electrical path that branches so that the current divides and only part of it flows through any branch. The voltage, or potential difference, across each branch of a parallel circuit is the same, but the currents may vary. In a home electrical circuit, for instance, the same voltage is applied across each light or appliance, but each of these loads draws a different amount of current, according to its power requirements. A number of similar batteries connected in parallel provides greater current than a single battery, but the voltage is the same as for a single battery. See also integrated circuit; tuned circuit.
Above are resistors R1 and R2 in series (1A) and in parallel (1B). If two resistors are connected as shown in Figure 1B, the electric charges have alternate paths for flowing from c to d. The resistance to the flow of charge from c to d is clearly less than if either R1 or R2 were missing. Anyone who has ever had to find a way out of a crowded theatre can appreciate how much easier it is to leave a building with several exits than one with a single exit. The value of the resistance for two resistors in parallel is given by the equation:
If the resistors R1 and R2 are imagined to be wires of the same length and material, they would be wires with different cross-sectional areas. Connecting them in parallel is equivalent to placing them side by side, increasing the total area available for the flow of charge. The equivalent resistance is smaller than the resistance of either resistor individually.