Classification of minerals
- Related Topics:
- mineral deposit
- sulfide mineral
- asbestos
- sulfate mineral
- carbonate mineral
- On the Web:
- National Center for Biotechnology Information - Minerals (Nov. 12, 2024)
Since the middle of the 19th century, minerals have been classified on the basis of their chemical composition. Under this scheme, they are divided into classes according to their dominant anion or anionic group (e.g., halides, oxides, and sulfides). Several reasons justify use of this criterion as the distinguishing factor at the highest level of mineral classification. First, the similarities in properties of minerals with identical anionic groups are generally more pronounced than those with the same dominant cation. For example, carbonates have stronger resemblance to one another than do copper minerals. Secondly, minerals that have identical dominant anions are likely to be found in the same or similar geologic environments. Therefore, sulfides tend to occur together in vein or replacement deposits, while silicate-bearing rocks make up much of Earth’s crust. Third, current chemical practice employs a nomenclature and classification scheme for inorganic compounds based on similar principles.
Investigators have found, however, that chemical composition alone is insufficient for classifying minerals. Determination of internal structures, accomplished through the use of X rays, allows a more complete appreciation of the nature of minerals. Chemical composition and internal structure together constitute the essence of a mineral and determine its physical properties; thus, classification should rely on both. Crystallochemical principles—i.e., those relating to both chemical composition and crystal structure—were first applied by the British physicist W. Lawrence Bragg and the Norwegian mineralogist Victor Moritz Goldschmidt in the study of silicate minerals. The silicate group was subdivided in part on the basis of composition but mainly according to internal structure. Based on the topology of the SiO4 tetrahedrons, the subclasses include framework, chain, and sheet silicates, among others. Such mineral classifications are logical and well-defined.
The broadest divisions of the classification used in the present discussion are (1) native elements, (2) sulfides, (3) sulfosalts, (4) oxides and hydroxides, (5) halides, (6) carbonates, (7) nitrates, (8) borates, (9) sulfates, (10) phosphates, and (11) silicates.
Native elements
Apart from the free gases in Earth’s atmosphere, some 20 elements occur in nature in a pure (i.e., uncombined) or nearly pure form. Known as the native elements, they are partitioned into three families: metals, semimetals, and nonmetals. The most common native metals, which are characterized by simple crystal structures, make up three groups: the gold group, consisting of gold, silver, copper, and lead; the platinum group, composed of platinum, palladium, iridium, and osmium; and the iron group, containing iron and nickel-iron. Mercury, tantalum, tin, and zinc are other metals that have been found in the native state. The native semimetals are divided into two isostructural groups (those whose members share a common structure type): (1) antimony, arsenic, and bismuth, with the latter two being more common in nature, and (2) the rather uncommon selenium and tellurium. Carbon, in the form of diamond and graphite, and sulfur are the most important native nonmetals.
| Native elements | |
|---|---|
|
Source: Modified from C. Klein and C.S. Hurlbut, Jr., Manual of Mineralogy, copyright © 1985 John Wiley and Sons, Inc., reprinted with permission of John Wiley and Sons. | |
| Metals | |
| Gold group | |
| gold | Au |
| silver | Ag |
| copper | Cu |
| Platinum group | |
| platinum | Pt |
| Iron group | |
| iron | Fe |
| (kamacite | Fe, Ni) |
| (taenite | Fe, Ni) |
| Semimetals | |
| Arsenic group | |
| arsenic | As |
| bismuth | Bi |
| Nonmetals | |
| sulfur | S |
| diamond | C |
| graphite | C |
Metals
Gold, silver, and copper are members of the same group (column) in the periodic table of elements and therefore have similar chemical properties. In the uncombined state, their atoms are joined by the fairly weak metallic bond. These minerals share a common structure type, and their atoms are positioned in a simple cubic closest-packed arrangement. Gold and silver both have an atomic radius of 1.44 angstroms (Å), or 1.44 × 10– 7 millimetre, which enables complete solid solution to take place between them. The radius of copper is significantly smaller (1.28 Å), and as such copper substitutes only to a limited extent in gold and silver. Likewise, native copper contains only trace amounts of gold and silver in its structure.
Because of their similar crystal structure, the members of the gold group display similar physical properties. All are rather soft, ductile (capable of being drawn into wire), malleable (capable of being shaped by a hammer or rollers), and sectile (capable of being cut smoothly by a knife or other instrument); gold, silver, and copper serve as excellent conductors of electricity and heat and exhibit metallic lustre and hackly fracture (a type of fracture characterized by sharp jagged surfaces). These properties are attributable to their metallic bonding. The gold-group minerals crystallize in the isometric system and have high densities as a consequence of cubic closest packing.
In addition to the elements listed above, the platinum group also includes rare mineral alloys such as iridosmine. The members of this group are harder than the metals of the gold group and also have higher melting points.
The iron-group metals are isometric and have a simple cubic packed structure. Its members include pure iron, which is rarely found on the surface of Earth, and two species of nickel-iron (kamacite and taenite), which have been identified as common constituents of meteorites. Native iron has been found in basalts of Disko Island, Greenland and nickel-iron in Josephine and Jackson counties, Oregon. The atomic radii of iron and nickel are both approximately 1.24 Å, and so nickel is a frequent substitute for iron. Earth’s core is thought to be composed largely of such iron-nickel alloys.
Semimetals
The semimetals antimony, arsenic, and bismuth have a structure type distinct from the simple-packed spheres of the metals. In these semimetals, each atom is positioned closer to three of its neighbouring atoms than to the rest. The structure of antimony and arsenic is composed of spheres that intersect along flat circular areas.
The covalent character of the bonds joining the four closest atoms is linked to the electronegative nature of the semimetals, reflected by their position in the periodic table. Members of this group are fairly brittle, and they do not conduct heat and electricity nearly as well as the native metals. The bond type suggested by these properties is intermediate between metallic and covalent; it is consequently stronger and more directional than pure metallic bonding, resulting in crystals of lower symmetry.
Nonmetals
The native nonmetals diamond, fullerene, graphite, and sulfur are structurally distinct from the metals and semimetals. The structure of sulfur (atomic radius = 1.04 Å), usually orthorhombic in form, may contain limited solid solution by selenium (atomic radius = 1.16 Å).
The polymorphs of carbon—graphite, fullerene, and diamond—display dissimilar structures, resulting in their differences in hardness and specific gravity. In diamond, each carbon atom is bonded covalently in a tetrahedral arrangement, producing a strongly bonded and exceedingly close-knit but not closest-packed structure. The carbon atoms of graphite, however, are arranged in six-membered rings in which each atom is surrounded by three close-by neighbours located at the vertices of an equilateral triangle. The rings are linked to form sheets, called graphene, that are separated by a distance exceeding one atomic diameter. Van der Waals forces act perpendicular to the sheets, offering a weak bond, which, in combination with the wide spacing, leads to perfect basal cleavage and easy gliding along the sheets. Fullerenes are found in meta-anthracite, in fulgurites, and in clays from the Cretaceous-Tertiary boundary in New Zealand, Spain, and Turkmenistan as well as in organic-rich layers near the Sudbury nickel mine of Canada.