Temperature

Regardless of how favourable light and moisture conditions may be, plant growth ceases when the air and leaf temperature drops below a certain minimum or exceeds a certain maximum value. Between these limits, there is an optimum temperature at which growth proceeds with greatest rapidity. These three temperature points are the cardinal temperatures for a given plant; the cardinal temperatures are known for most plant species, at least approximately. Cool-season crops (oats, rye, wheat, and barley) have low cardinal temperatures: minimum 32° to 41° F (0° to 5° C), optimum 77° to 88° F (25° το 31° C), and maximum 88° το 99° F (31° to 37° C). For hot-season crops, such as melons and sorghum, the span of cardinal temperatures is much higher. The cardinal temperatures may vary with stage of development. For example, cold treatment near 32° F (0° C) of germinated seeds before sowing can transform winter rye into the spring type; such treatment, called vernalization, has practical application in cold-climate plants.

The range of diurnal temperature variation is also important; the best net photosynthesis is related to a large diurnal temperature range, or high daytime and low nighttime temperatures. Knowledge of the difference between leaf and air temperatures aids farmers in adopting protective measures. In middle and high latitudes, frost often occurs before the air temperature drops to freezing; in summer, heat injury to plants might be much more serious than that suggested by the air temperature alone. Because of this factor, farmers in Taiwan shade the pineapple fruit to prevent heat damage.

Soil temperature sometimes is of greater ecological significance to plant life than air temperature. Germination of seed, root function, rate of plant growth, and occurrence and severity of plant diseases all are affected by soil temperature. Since an unfavourable soil temperature during the growing season can retard or ruin a crop, techniques have been developed for modifying the temperature. The two most important methods are (1) regulation of the energy exchange and (2) altering the thermal properties of the ground. Incoming energy can be regulated by an insulation layer on or near the ground surface, such as paper, straw, plastic, or trees; the outgoing radiation can be reduced by insulation materials or by generating smoke or fog in the air. Thermal properties of the ground can be modified by cultivation or irrigation, increasing the soil’s ability to absorb radiation, or by varying the rate of evaporation. Mulching is a common technique for soil temperature control. Carbon black or white material can change the soil’s ability to absorb radiation. In the Soviet Union, for example, it was reported that 100 pounds of coal dust per acre (112 kilograms per hectare) caused a one-month advance in the maturity date of cotton.

Frost

Another aspect of temperature control is frost protection. Likelihood of damage from freezing temperature depends upon the plant species, the season, the manner of temperature change, the physiological state of the plant, and other factors. Orchards can be located so as to minimize the chances of frost damage.

Two types of frost are recognized: (1) radiation frost, which occurs on clear nights with little or no wind when the outgoing radiation is excessive and the air temperature is not necessarily at the freezing point, and (2) wind, or advection, frost, which occurs at any time, day or night, regardless of cloud cover, when wind moves air in from cold regions. Both types may occur simultaneously. Most frost-protection techniques can raise the temperature only a few degrees, while some are effective only against radiation frost.

Heating is probably the best known and most effective frost-protection measure. It is most effective on nights with a strong temperature inversion, a condition in which the air temperature increases markedly from the ground up to as high as 40 or 50 feet (12 or 15 metres). The depth of air to be heated is thus rather shallow, and the area over which a given temperature rise can be produced increases linearly with the strength of the inversion. Lacking a temperature inversion, heaters protect by radiating heat to the plants and the ground surface, and by emitting a layer of humid smoke that reduces the net outgoing loss from the ground.

In general, a large number of small heaters is most effective; large heaters set up convection currents that break up the warm ceiling and draw in cold air. For radiation-frost protection, the heaters are placed in “view” of the plants or trees, but for advective frost the heavier concentration is placed along the upwind border. Common fuels for the heaters include oil, coal, briquettes, and wood. Oil is most effective, because it can be ignited rapidly and extinguished easily. Heating is a costly technique; a few growers who tried it in England soon gave up the practice, and, even in places such as California, heating is becoming less common and is mostly restricted to a few high-value crops such as citrus fruits.

The wind machine is popular for frost protection; although it affords less reliable results, its operating cost is much lower than that for heaters. These machines, which are like fans or propellers, break up the nocturnal temperature inversion by mechanically mixing the air, returning heat to the ground that was lifted during the day. The stronger the temperature inversion, the more effective is the wind machine, which is ineffective, however, against a daytime freeze or cold soil. Even under the best circumstances, ground-surface temperatures will rise very little; therefore, some operators install both heaters and wind machines, using the latter for strong-inversion nights and the former for wind-frost protection.

Flooding and sprinkling with water prevent excessive ground cooling by increasing the heat conductivity and heat capacity of the soil and releasing latent heat of fusion, or the heat given off when the water freezes. The temperature of the plant will not fall below the freezing point so long as the change of state from water to ice is taking place. Flooding has the disadvantage of retarding increase in soil warmth during the day; thus, it can be used effectively for only one or two nights. Sprinkling creates water particles in the air that reduce outgoing radiation, but plant temperature declines immediately on cessation of sprinkling, and the ice formation may cause damage to the crop. In general, successful protection by flooding and sprinkling demands much skill and judgment from the operator.

Brushing is a frost-protection technique in which shields of paper or aluminum foil are set up to reduce radiation loss to the sky; it has been used with fair success for tomato culture in California.

Massachusetts cranberry growers add a thin layer of sand to the soil periodically. The sandy surface warms up easily and cools slowly by radiation; it also reduces evaporation of its low water content. Sanding can raise the temperature of loam, clay, and organic soils, thus diminishing frost hazard. Windbreaks can also function as frost protection by reducing inflow of cold air and by shielding plants from the total night sky.

Spraying of harmless foams or gels on plants threatened by frost is a technique under investigation. The trapped air in the foam serves as insulative protection, while the foam can be designed to dissolve after any desired time interval. The technique has been explored for use on strawberries and other low-growing crops.