- Also called:
- air terminal, aerodrome, or airfield
- Key People:
- Norman Foster
- Moshe Safdie
- Related Topics:
- airside facility
- taxiway
- runway
- landside facility
- hangar
News •
Passenger requirements
As passenger throughput at airports increases, the passenger terminal becomes a more important element of the airport, attaining a dominant status in the largest facilities. The passenger terminal may amount to less than 10 percent of the total investment in a small airport, but at large airports terminals often account for more than 70 percent of infrastructural investment. The design that is ultimately adopted depends principally on the passenger volumes to be served and the type of passenger involved.
Passengers are frequently classified as business or leisure, scheduled or charter, originating or destined, and transfer or transit. Business travelers tend to pay significantly higher fares, and airlines usually wish to provide a high quality of service in order to attract such traffic. The passenger terminal at Heathrow Airport near London, for example, was designed to a very high standard of space and decor to attract just this type of passenger. Scheduled and charter passengers, meanwhile, tend to have very different needs in the terminal, especially at check-in and in the provision of ground transportation. Palma Airport, on the Spanish island of Majorca, has a landside that is designed to accommodate large numbers of charter tourists arriving and departing the airport by bus.
Some airports have a very high percentage of passengers who are either transiting the airport (i.e., continuing on the same flight) or transferring to another flight. At Hartsfield Atlanta International Airport in Georgia and at Chicago’s O’Hare International Airport, for example, two-thirds of all passengers transfer to other flights and do not visit the cities where the airports are sited. These passengers have special needs but usually only on the airside of the terminal. There is no need to provide parking or ground transportation to the city for such passengers; they will, however, need transit lounges and other areas such as transit check-in desks.
Airports that receive a large number of transferring and transiting passengers are referred to as hubbing airports. At a hub, aircraft arrive in waves, and passengers transfer between aircraft during the periods when these waves are on the ground. By using a “hub-and-spoke” network, airlines are able to increase the load factors on aircraft and to provide more frequent departures for passengers—at the cost, however, of inconvenient interchange at the hub.
Terminal designs
Open apron and linear designs
The oldest and simplest layout for passenger terminals is the open apron design, in which aircraft park on the apron immediately adjacent to the terminal and passengers walk across the apron to board the aircraft by mobile steps. Frequently, the aircraft maneuver in and out of the parking positions under their own power. As airports grow, however, it is impossible to have large numbers of passengers walking across the apron. In this case, it is common to have terminals designed to the linear concept, with aircraft parked at gates immediately adjacent to the terminal itself. Usually, air bridges are employed for transferring passengers directly between the terminal building and the aircraft. The limitation of the linear concept is usually the long building dimensions required; these can mean long walking distances for transferring passengers and other complications related to building operation. In practice, building lengths tend to be limited to approximately 800 metres (2,650 feet). Examples of the linear design occur at Kansas City International Airport in Missouri, U.S., Munich Airport in Germany, and Charles de Gaulle Airport near Paris.
Pier and satellite designs
Where one building must serve a larger number of aircraft gates, the pier concept, originally developed in the 1950s, has been found very useful. Frankfurt International Airport in Germany and Schiphol Airport near Amsterdam still use such terminals. In the late 1970s, pier designs at Chicago’s O’Hare and Atlanta’s Hartsfield successfully handled in excess of 45 million mainly domestic passengers per year. However, as the number of aircraft gates grows, the distances that a passenger may have to travel within a pier-type terminal become exceedingly long, passenger circulation volumes become very large, and the terminal itself can become uncomfortable and unattractive to use. In order to cut down walking distances, some terminals, beginning in the 1960s, were designed on the satellite concept. Frequently, passengers are carried out to the satellites by some form of automated people mover or automatic train. Some satellite designs were very successful—for example, at Orlando and Tampa in Florida, U.S.—but to some degree the concept has fallen out of favour, having been found difficult to adapt to the changing size of aircraft and wasteful of apron space. Los Angeles International Airport originally had all its aircraft served at satellite buildings, but during the 1980s all satellites were converted to pier structures.
Transporter designs
In the early 1960s the transporter concept originated as a method of reducing aircraft maneuvering on the apron and of eliminating the need for passengers to climb up and down stairways in order to enter or exit the aircraft. In a concept derived from much older designs (such as that at Linate in Milan, where ordinary apron buses are used), passengers are brought directly to the aircraft by a specialized transporter vehicle. Mobile lounges used at Dulles International Airport near Washington, D.C., and at Jiddah’s King Abdul Aziz International Airport have bodies that can be raised and lowered to suit the exact height of the terminal floor and the aircraft sill. However, passenger loading and unloading times are lengthened, causing turnaround delays, and aircraft are more likely to be damaged by the heavy lounges. For such reasons, this type of design has not proved popular with either passengers or airlines.
Remote pier designs
The remote pier was introduced at Atlanta’s Hartsfield in the early 1980s. In this concept, passengers are brought out to a remote pier by an automatic people mover and there embark or disembark in the conventional manner. The system has proved very efficient for handling transfer passengers, but the long distances involved in the terminal layout necessitate the use of a sophisticated people-mover system. The design of the terminal at Stansted Airport near London incorporates this concept.