barrel
barrel, large, bulging cylindrical container of sturdy construction traditionally made from wooden staves and wooden or metal hoops. The term is also a unit of volume measure, specifically 31 gallons of a fermented or distilled beverage, or 42 gallons of a petroleum product. According to the 1st-century-ad Roman historian Pliny the Elder, the ancient craft of barrel making, also called cooperage, was invented by the inhabitants of the Alpine valleys.
Slack barrels, made to hold dry products, may be made of pine or softwood and do not require precise workmanship. Smaller versions, usually called kegs, long were used to contain heavy bulk products such as nails. Tight barrels, made to hold liquids, must be constructed carefully of high-grade woods, such as white oak, with bungholes for filling and emptying.
Wood for barrel staves and headings is usually air-dried for at least a year, then kiln-dried for 10 to 20 days before being cut and planed to the needed size and finish. A crucial operation is jointing of the edges of the staves and giving them the proper bilge (middle bulge) so that the joints will be tight and the circumference uniform. The bulge gives the barrel added resistance to internal pressure.
The most complex part of the operation is called raising the barrel. Staves are set vertically into a head truss ring, and a temporary hoop is placed over the other end. In this arrangement, the staves are passed through a steam tunnel to soften them for drawing into final shape and then dried again. Whiskey barrels are charred on the inside at this point, so that they will develop flavour in the whiskey as it ages. Beer, formerly stored and shipped in wooden barrels, now is placed in one-piece metal barrels. A machine called a crozer trims the ends of the staves and cuts the croze, the groove near the end of the stave where the head pieces fit. The temporary end rings are pulled off, the head pieces fitted, and permanent head hoops put in place. The temporary bilge hoops are removed, and the rest of the permanent hoops are put on.
Tight barrels have been superseded for the most part by metal drums and bulk-tank transportation, and slack barrels by paper-shipping sacks, corrugated paperboard cartons, and fibreboard drums.