Existing boat types
News •
Early boats
A number of ancient boat types have survived into the present. The rafts still in use include the Brazilian jangada and the catamaran of Sri Lanka. The Brazilian and other sailing rafts have dagger boards or centreboards fitted between the two centre logs to allow windward sailing.
A large number of dugout canoe types remain in use. Some of these are merely trough-shaped hulls suitable only for protected waters, but others are well-developed craft. Until late in the 19th century the large single-log dugout canoes of the Northwest Coast Indians of North America were the best developed canoes of that type in existence. Multiple log canoes were used as sailing craft on Chesapeake Bay and large craft of a similar form and rig later developed under the type name bugeye. Large dugouts with built-up sides exist in the South Pacific and once were very numerous. The Pacific Island canoes are commonly narrow and require double hulls or outrigged floats on one or both sides for stability. One of the most notable of the single-outriggers is the flying proa, one of the fastest sailing boats in the world, first described by Capt. James Cook. The double-hulled craft are made of two canoes of equal size, placed side by side but at a short distance apart. These usually are used as sailing canoes and have come to be known as catamarans. The idea has been adapted by yachtsmen in the sailing catamaran or double-huller, ranked among the fastest sailing types known.
Skin boats have survived in the American Arctic in various tribal forms of the kayak or hunting boat and in the larger and open umiak. Other skin-covered craft, such as the English coracle for river fishing and the Irish curragh for sea fishing and transport, have continued in use for hundreds of years, although the modern versions have outer covers of canvas and tar instead of the original skins and tallow.
The birchbark canoe of the North American Indians could still be found in use into the early 20th century, but in most areas canvas had gradually taken the place of bark long before 1900. Bark canoes were also used by Aboriginal Australians well into the 19th century.
Sewed plank construction in the 20th century was mostly confined to some islands in the South Pacific, where basic dugouts were heightened by means of plank sides, and to some very limited areas where all-plank boats were built by this method. The basic advantages of sewed plank construction were utilized in a patented process, using copper or bronze wire, that was employed in England early in the 20th century for building high-speed motor boats.
National and regional boat types
The need for craft of the boat class in fisheries, pilotage, salvage, and transport resulted in almost innumerable models, each designed for superior performance in a specific task and to meet geographic and economic needs.
Asia
In East Asia the sampan is the commonest boat type, although the hull form, rig, and fittings vary widely. Some sampans have sharp bows; nearly all have large transom stems, and the after portion of the gunwale is higher than the forward portion. Sampans are often rigged for sailing with a single battened Chinese lugsail. Usually the boats have only one mast, but there are local types, notably in Hong Kong, equipped with two. The sampan is sculled with a large sweep balanced on the transom stern. It is usually open or partially decked and has a shelter or cabin aft for passengers or freight. In Japanese waters another form of sampan once was common, rigged with a rather primitive lugsail and with a peculiar form: the stem was straight and raking in profile and the forebody long and rather sharp, while the midsection was flat-bottomed. This model later developed into a motorboat and came to be used not only in Japan but in Hawaii and Taiwan.
In Southeast Asia the proa is the basic boat type. It is a fast, sharp-ended, rowing and sailing boat once popular with Malay pirates. The proa is open, long and rather narrow, with a "clipper" bow and a sharp stern. The boats are usually rigged with one or two sails somewhat like the Chinese lugsail. Early forms were built more than 60 feet (18 metres) in length and decked. The name proa is often applied both to this type and to the single-outrigger flying proa; however, the proa of the Pacific and the Malay boats are entirely different types.
In Indian waters there are a number of boat types, including dugouts with raised plank sides, sometimes fitted with outriggers, and plank boats with a long, straight, raking stem in profile, a transom stern, and a short keel. The latter are usually rigged with one mast and a settee sail. These boats vary locally in form and rig. One type, the pattamar, has greater depth at the bow than at the stern, and the keel profile is a hollow curve. Rigged with two or three masts, it is considered a fast sailer.
Middle East and Mediterranean
In the Persian Gulf and southward along the east African coast the best known boats are usually classed as dhows. The two types so named are the bagala and sambuk. These have one or two settee sails, short keels, long and very raking curved stems, square stems, and a well-formed hull for fast sailing.
The boats of the Mediterranean basin are numerous in type and rig. One is the handsome Turkish caïque, a long, narrow rowing boat with graceful ends, designed for speed. These boats sometimes are rigged for sailing with a small spritsail or lugsail and in modern versions are often fitted with an outboard motor in a well at the stern. Small double-ended boats called sandals are also used. A square-stern sailing skiff of distinctive appearance is found on the Turkish Black Sea coast; it resembles a coaster of larger size known as the taka. A distinctive double-ended beach boat, known as the çektirme, is also found on the Turkish coast, although this name is more commonly applied to a larger auxiliary coaster.
On the Nile may be found the dahabeah, a sailing lighter and houseboat. This boat developed from the Nile gaiassa, a lighter and river freighter with a shallow hull like that of a canal boat, a high, sheer bow, and a huge outboard rudder. These boats usually have a large lateen sail forward and a small one aft, although some are fitted with only a single large sail. Another variation is the naggar, a sailing river lighter rigged with a single lugsail, with the boom along its foot parallel with its head.
The best known of Italian boats is the gondola of Venice, a double-ended craft, with ornamental posts at bow and stern, propelled by an oarsman using a single oar or sweep. The topo is a double-ended, flat-bottomed craft with a single mast carrying a lugsail or a small outboard motor.
The boomed standing lugsail was for a long time most common in the Adriatic, usually in a two-masted rig, while the lateen sail predominated in boats built in southern Italy, on the French Mediterranean coast, and in Spain and Portugal. Among small craft of the Mediterranean, combination rowing and sailing boats were once typical, rather than boats built to sail only, but in modern times engines have almost completely replaced sails. Many local types in the Mediterranean are loosely classed as feluccas, a term originally applied to two-masted lateen sail craft fitted to row and built for speed; later the name came to be applied also to three-masted craft of the galley type that had once been called xebecs.
Northern Europe and Britain
The coast of northern France was the home of a number of types of square-sterned and sharp-sterned lug-rigged boats, usually two-masters. These boats were commonly of lapstrake construction and were good sailers, many carrying large areas of sail. The three-masted lugger or chasse-marée of France and a similar type built in England were fast enough to become the traditional craft of Channel smugglers.
England and Scotland produced many distinctive small boats; the coble, a square-sterned beach boat with deep forefoot, still survives as a motor fishing boat, as does the caravel-built Thames bawley. An extinct beach boat is the Yarmouth beach yawl, a long, narrow, lapstrake double-ender with sharp ends, built for salvage work and rigged with two or three lugsails and a jib.
Another noted English type was the Deal galley punt, a square-sterned, lapstrake open boat rigged with a single dipping lugsail and once used for salvage and rescue work off the beach. The cat was a larger lugger of two or three masts used at Deal; both types were very seaworthy and were fast sailers. Scotland produced many fine skiffs, the class name for a number of open or partly decked, lapstrake, one-masted, lug-rigged boats. The Lock Fyne skiff, the Fifie skiff, and the Scaffie and Zulu skiffs were fine examples of sailing and rowed fishing boats. The Shetland sexern was particularly fast and seaworthy; this type was rigged with a single lugsail, and its hull was low-sided and sharp-ended.
In the Netherlands and Belgium small boats fitted to sail had distinctive wing-shaped leeboards pivoted on each side at about amidships, to reduce leeway when sailing to windward. The boats were usually shallow in body and strongly built, with full, buoyant ends. Danish boats generally have sharper lines and deeper draft, and the smaller ones, commonly lapstrake built, sail and row well. The praam, a lapstrake boat with a square stern and a small transom bow, is a popular Danish type; formerly a sailing and rowing boat, it came to be used extensively as a motor boat. The praam can also be found on the Norwegian coast.
The predominance of the double-ended, lapstrake hull in Scandinavia is very marked, and some modern boats strongly resemble those of the Vikings. Scandinavian small boats are usually fast rowing and sailing craft with bow and stern sharp and curved in profile.
North America
Many small boat types developed in North America during the 19th century. In eastern Canada the Labrador whaler, a lapstrake, double-ended rowing and sailing boat used in the Labrador fisheries, became popular, and its design appears to have inspired the design of the Tancook whaler, a schooner-rigged centreboard fishing boat notable for its excellent handling qualities. Another boat developed in the maritime provinces was the Cape Island sloop, a deep draft keel sloop once popular in the shore fisheries. On the Great Lakes the Canadians produced a two-masted, half decked, square-sterned Collingwood skiff, as well as a similar type in double-ended form. Perhaps the best known Canadian types are the lumber yard drive-boat or bateau, a double-ended, flat-bottomed rowing and poling boat used in the lumber drives when timber is floated downstream to the mills; and the York boat, a double-ended sailing and rowing boat used in the fur trade. The large birchbark maitre canot of the fur trade, an oversized version of the Indian canoe, also was once of economic importance.
The United States and Canada both produce the dory, the flat-bottomed skiff of the New England and Maritime Provinces fisheries. Some dories are fitted with centreboards for sailing. Others were equipped with engines, and this led to the design of special types in which rounded side frames replaced the straight frames of the regular fishing dory, producing a hull with an almost round bottom and a wide plank keel. This form of hull was carried to its highest degree of evolution in the New Jersey Seabright skiff or beach skiff, in which the bottom is very narrow and the sides very round. Formerly a rowing and sailing beach boat, the Seabright skiff developed into a high speed, seaworthy motorboat favoured for sport fishing.
There have been hundreds of distinct types of small American sail and rowing boats under 40 feet in length. Some of the more notable of these are the Hampton boat of New England, first a lapstrake sail and rowing boat like the Labrador whaler but later a square-sterned, two-masted, half-decked boat equipped with a centreboard. This design was found suitable for the installation of engines and was gradually modified into a fishing launch. The Block Island boat and No Man’s Land boat were two-masted, double-ended beach boats notable for their seaworthiness. The New Haven sharpie was a large, two-masted, flat-bottomed boat, and its use spread southward to the Carolina sounds following the development of the oyster fisheries. Of a number of small sailing scows that also were employed in the U.S. fisheries, the New Jersey garvey is one of the better known. This type of sailing scow had one leeboard held to the side by a rack or iron bar-and-staple device and was usually rigged with one or two spritsails. It was used in the oyster and other inshore fisheries and in modern versions has been modified into a low-cost but efficient launch.
Another boat that has been adapted for use with engines is the New Orleans lugger. Originally a single-masted, square-sterned boat with a centreboard, the only lugger-rigged boat in the American fisheries, it was a fast sailer, and its good handling qualities made it ideal for use as a power boat. The San Francisco felucca, a single-masted, lateen-rigged fishing boat, also developed into a double-ended power craft now known as the Monterey boat. In its simplest form, the pirogue is a dugout, but later forms are more elaborate. These boats are widely distrubuted, as their shallow draft makes them useful for negotiating swamplands and shallow inlets.
Shipboats
The boats carried on shipboard for harbour transportation, rescue work, and the like constitute a special class. Usually they are open boats fitted to row, although some are sailboats and many modern types have engines.
The largest boat on shipboard is the launch or longboat, originally a burdensome sailing and rowing boat capable of carrying such heavy loads as anchors and cannon. When steam engines became available, the launch became a self-propelled boat and later a motor boat. The cutter was a long, narrow boat especially designed for speed under either sail or oars; it usually was carried only by naval or revenue vessels. Another naval type was the gig, similar to the cutter but sharper in its lines, and usually reserved for the personal transport of high-ranking officers. Both the gig and cutter were designed with narrow transom stems and some rocker or curvature in the keels. Rigid inflatable launches are used by coast guard forces around the world to ensure compliance with maritime laws.
The yawl or dinghy, sometimes called a stern-boat when it was slung from davits at the stern of the ship, was a short, square-sterned rowing boat, either lapstrake- or caravel-planked, and sometimes fitted to sail. Modern yawls are powered, and the yawls carried aboard skipjacks, the V-bottomed sloops popular in Chesapeake Bay waters, are known as push-boats because they are used to push the mother ship in a calm.
The whaleboat is a light, swift, rowing and sailing boat fitted with a centreboard; usually it is caravel-built, although lapstrake whaleboats predominated at one time. Developed for use by whaling crews, it has superior handling characteristics that made it popular as a general purpose ship’s boat, and it often serves as a cutter or gig.
The lifeboat is a double-ended rowing boat carried aboard ship for rescue purposes. Originally of wooden lapstrake construction, these boats now are almost universally made of steel, and some are equipped with diesel or gasoline engines. They often are built with special air chambers to make them unsinkable, and many are designed to be self-bailing and self-righting in heavy seas. The size and fitting of lifeboats are established by law, as is the number a ship must carry.
The Editors of Encyclopaedia Britannica