gold processing

gold processing, preparation of the ore for use in various products.

For thousands of years the word gold has connoted something of beauty or value. These images are derived from two properties of gold, its colour and its chemical stability. The colour of gold is due to the electronic structure of the gold atom, which absorbs electromagnetic radiation with wavelengths less than 5600 angstroms but reflects wavelengths greater than 5600 angstroms—the wavelength of yellow light. Gold’s chemical stability is based on the relative instability of the compounds that it forms with oxygen and water—a characteristic that allows gold to be refined from less noble metals by oxidizing the other metals and then separating them from the molten gold as a dross. However, gold is readily dissolved in a number of solvents, including oxidizing solutions of hydrochloric acid and dilute solutions of sodium cyanide. Gold readily dissolves in these solvents because of the formation of complex ions that are very stable.

Gold (Au) melts at a temperature of 1,064° C (1,947° F). Its relatively high density (19.3 grams per cubic centimetre) has made it amenable to recovery by placer mining and gravity concentration techniques. With a face-centred cubic crystal structure, it is characterized by a softness or malleability that lends itself to being shaped into intricate structures without sophisticated metalworking equipment. This in turn has led to its application, from earliest times, to the fabrication of jewelry and decorative items.

History

The history of gold extends back at least 6,000 years, the earliest identifiable, realistically dated finds having been made in Egypt and Mesopotamia c. 4000 bc. The earliest major find was located on the Bulgarian shores of the Black Sea near the present city of Varna. By 3000 bc gold rings were used as a method of payment. Until the time of Christ, Egypt remained the centre of gold production. Gold was, however, also found in India, Ireland, Gaul, and the Iberian Peninsula. With the exception of coinage, virtually all uses of the metal were decorative—e.g., for weapons, goblets, jewelry, and statuary.

Egyptian wall reliefs from 2300 bc show gold in various stages of refining and mechanical working. During these ancient times, gold was mined from alluvial placers—that is, particles of elemental gold found in river sands. The gold was concentrated by washing away the lighter river sands with water, leaving behind the dense gold particles, which could then be further concentrated by melting. By 2000 bc the process of purifying gold-silver alloys with salt to remove the silver was developed. The mining of alluvial deposits and, later, lode or vein deposits required crushing prior to gold extraction, and this consumed immense amounts of manpower. By ad 100, up to 40,000 slaves were employed in gold mining in Spain. The advent of Christianity somewhat tempered the demand for gold until about the 10th century. The technique of amalgamation, alloying with mercury to improve the recovery of gold, was discovered at about this time.

The colonization of South and Central America that began during the 16th century resulted in the mining and refining of gold in the New World before its transferal to Europe; however, the American mines were a greater source of silver than gold. During the early to mid-18th century, large gold deposits were discovered in Brazil and on the eastern slopes of the Ural Mountains in Russia. Major alluvial deposits were found in Siberia in 1840, and gold was discovered in California in 1848. The largest gold find in history is in the Witwatersrand of South Africa. Discovered in 1886, it produced 25 percent of the world’s gold by 1899 and 40 percent by 1985. The discovery of the Witwatersrand deposit coincided with the discovery of the cyanidation process, which made it possible to recover gold values that had escaped both gravity concentration and amalgamation. With E.B. Miller’s process of refining impure gold with chlorine gas (patented in Britain in 1867) and Emil Wohlwill’s electrorefining process (introduced in Hamburg, Ger., in 1878), it became possible routinely to achieve higher purities than had been allowed by fire refining.

Ores

The major ores of gold contain gold in its native form and are both exogenetic (formed at the Earth’s surface) and endogenetic (formed within the Earth). The best-known of the exogenetic ores is alluvial gold. Alluvial gold refers to gold found in riverbeds, streambeds, and floodplains. It is invariably elemental gold and usually made up of very fine particles. Alluvial gold deposits are formed through the weathering actions of wind, rain, and temperature change on rocks containing gold. They were the type most commonly mined in antiquity. Exogenetic gold can also exist as oxidized ore bodies that have formed under a process called secondary enrichment, in which other metallic elements and sulfides are gradually leached away, leaving behind gold and insoluble oxide minerals as surface deposits.

Are you a student?

Get a special academic rate on Britannica Premium.

Subscribe

Endogenetic gold ores include vein and lode deposits of elemental gold in quartzite or mixtures of quartzite and various iron sulfide minerals, particularly pyrite (FeS₂) and pyrrhotite (Fe_1-xS). When present in sulfide ore bodies, the gold, although still elemental in form, is so finely disseminated that concentration by methods such as those applied to alluvial gold is impossible.

Native gold is the most common mineral of gold, accounting for about 80 percent of the metal in the Earth’s crust. It occasionally is found as nuggets as large as 12 millimetres (0.5 inch) in diameter, and on rare occasions nuggets of native gold weighing up to 50 kilograms are found—the largest having weighed 92 kilograms. Native gold invariably contains about 0.1 to 4 percent silver. Electrum is a gold-silver alloy containing 20 to 45 percent silver. It varies from pale yellow to silver white in colour and is usually associated with silver sulfide mineral deposits.

Gold also forms minerals with the element tellurium; the most common of these are calaverite (AuTe₂) and sylvanite (AuAgTe₄). Other minerals of gold are sufficiently rare as to have little economic significance.

Of the world’s known mineral reserves of gold ore, 50 percent is found in South Africa, and most of the rest is divided among Russia, Canada, Australia, Brazil, and the United States. The largest single gold ore body in the world is in the Witwatersrand of South Africa.