Development of industries
- Related Topics:
- technology
Metallurgy
Another industry that interacted closely with the power revolution was that concerned with metallurgy and the metal trades. The development of techniques for working with iron and steel was one of the outstanding British achievements of the Industrial Revolution. The essential characteristic of this achievement was that changing the fuel of the iron and steel industry from charcoal to coal enormously increased the production of these metals. It also provided another incentive to coal production and made available the materials that were indispensable for the construction of steam engines and every other sophisticated form of machine. The transformation that began with a coke-smelting process in 1709 was carried further by the development of crucible steel in about 1740 and by the puddling and rolling process to produce wrought iron in 1784. The first development led to high-quality cast steel by fusion of the ingredients (wrought iron and charcoal, in carefully measured proportions) in sealed ceramic crucibles that could be heated in a coal-fired furnace. The second applied the principle of the reverberatory furnace, whereby the hot gases passed over the surface of the metal being heated rather than through it, thus greatly reducing the risk of contamination by impurities in the coal fuels, and the discovery that by puddling, or stirring, the molten metal and by passing it hot from the furnace to be hammered and rolled, the metal could be consolidated and the conversion of cast iron to wrought iron made completely effective.
Iron and steel
The result of this series of innovations was that the British iron and steel industry was freed from its reliance upon the forests as a source of charcoal and was encouraged to move toward the major coalfields. Abundant cheap iron thus became an outstanding feature of the early stages of the Industrial Revolution in Britain. Cast iron was available for bridge construction, for the framework of fireproof factories, and for other civil-engineering purposes such as Thomas Telford’s novel cast-iron aqueducts. Wrought iron was available for all manner of mechanical devices requiring strength and precision. Steel remained a comparatively rare metal until the second half of the 19th century, when the situation was transformed by the Bessemer and Siemens processes for manufacturing steel in bulk. Henry Bessemer took out the patent for his converter in 1856. It consisted of a large vessel charged with molten iron, through which cold air was blown. There was a spectacular reaction resulting from the combination of impurities in the iron with oxygen in the air, and when this subsided it left mild steel in the converter. Bessemer was virtually a professional inventor with little previous knowledge of the iron and steel industry; his process was closely paralleled by that of the American iron manufacturer William Kelly, who was prevented by bankruptcy from taking advantage of his invention. Meanwhile, the Siemens-Martin open-hearth process was introduced in 1864, utilizing the hot waste gases of cheap fuel to heat a regenerative furnace, with the initial heat transferred to the gases circulating round the large hearth in which the reactions within the molten metal could be carefully controlled to produce steel of the quality required. The open-hearth process was gradually refined and by the end of the 19th century had overtaken the Bessemer process in the amount of steel produced. The effect of these two processes was to make steel available in bulk instead of small-scale ingots of cast crucible steel, and thenceforward steel steadily replaced wrought iron as the major commodity of the iron and steel industry.
Low-grade ores
The transition to cheap steel did not take place without technical problems, one of the most difficult of which was the fact that most of the easily available low-grade iron ores in the world contain a proportion of phosphorus, which proved difficult to eliminate but which ruined any steel produced from them. The problem was solved by the British scientists S.G. Thomas and Percy Gilchrist, who invented the basic slag process, in which the furnace or converter was lined with an alkaline material with which the phosphorus could combine to produce a phosphatic slag; this, in turn, became an important raw material in the nascent artificial-fertilizer industry. The most important effect of this innovation was to make the extensive phosphoric ores of Lorraine and elsewhere available for exploitation. Among other things, therefore, it contributed significantly to the rise of the German heavy iron and steel industry in the Ruhr. Other improvements in British steel production were made in the late 19th century, particularly in the development of alloys for specialized purposes, but these contributed more to the quality than the quantity of steel and did not affect the shift away from Britain to continental Europe and North America of dominance in this industry. British production continued to increase, but by 1900 it had been overtaken by that of the United States and Germany.
Mechanical engineering
Closely linked with the iron and steel industry was the rise of mechanical engineering, brought about by the demand for steam engines and other large machines, and taking shape for the first time in the Soho workshop of Boulton and Watt in Birmingham, where the skills of the precision engineer, developed in manufacturing scientific instruments and small arms, were first applied to the construction of large industrial machinery. The engineering workshops that matured in the 19th century played a vital part in the increasing mechanization of industry and transport. Not only did they deliver the looms, locomotives, and other hardware in steadily growing quantities, but they also transformed the machine tools on which these machines were made. The lathe became an all-metal, power-driven machine with a completely rigid base and a slide rest to hold the cutting tool, capable of more sustained and vastly more accurate work than the hand- or foot-operated wooden-framed lathes that preceded it. Drilling and slotting machines, milling and planing machines, and a steam hammer invented by James Nasmyth (an inverted vertical steam engine with the hammer on the lower end of the piston rod), were among the machines devised or improved from earlier woodworking models by the new mechanical engineering industry. After the middle of the 19th century, specialization within the machinery industry became more pronounced, as some manufacturers concentrated on vehicle production while others devoted themselves to the particular needs of industries such as coal mining, papermaking, and sugar refining. This movement toward greater specialization was accelerated by the establishment of mechanical engineering in the other industrial nations, especially in Germany, where electrical engineering and other new skills made rapid progress, and in the United States, where labour shortages encouraged the development of standardization and mass-production techniques in fields as widely separated as agricultural machinery, small arms, typewriters, and sewing machines. Even before the coming of the bicycle, the automobile, and the airplane, therefore, the pattern of the modern engineering industry had been clearly established. The dramatic increases in engineering precision, represented by the machine designed by British mechanical engineer Sir Joseph Whitworth in 1856 for measuring to an accuracy of 0.000001 inch (even though such refinement was not necessary in everyday workshop practice), and the corresponding increase in the productive capacity of the engineering industry, acted as a continuing encouragement to further mechanical innovation.
Textiles
The industry that, probably more than any other, gave its character to the British Industrial Revolution was the cotton-textile industry. The traditional dates of the Industrial Revolution bracket the period in which the processes of cotton manufacture in Britain were transformed from those of a small-scale domestic industry scattered over the towns and villages of the South Pennines into those of a large-scale, concentrated, power-driven, mechanized, factory-organized, urban industry. The transformation was undoubtedly dramatic both to contemporaries and to posterity, and there is no doubting its immense significance in the overall pattern of British industrialization. But its importance in the history of technology should not be exaggerated. Certainly there were many interesting mechanical improvements, at least at the beginning of the transformation. The development of the spinning wheel into the spinning jenny, and the use of rollers and moving trolleys to mechanize spinning in the shape of the frame and the mule, respectively, initiated a drastic rise in the productivity of the industry. But these were secondary innovations in the sense that there were precedents for them in the experiments of the previous generation; that in any case the first British textile factory was the Derby silk mill built in 1719; and that the most far-reaching innovation in cotton manufacture was the introduction of steam power to drive carding machines, spinning machines, power looms, and printing machines. This, however, is probably to overstate the case, and the cotton innovators should not be deprived of credit for their enterprise and ingenuity in transforming the British cotton industry and making it the model for subsequent exercises in industrialization. Not only was it copied, belatedly and slowly, by the woolen-cloth industry in Britain, but wherever other nations sought to industrialize they tried to acquire British cotton machinery and the expertise of British cotton industrialists and artisans.
One of the important consequences of the rapid rise of the British cotton industry was the dynamic stimulus it gave to other processes and industries. The rising demand for raw cotton, for example, encouraged the plantation economy of the southern United States and the introduction of the cotton gin, an important contrivance for separating mechanically the cotton fibres from the seeds, husks, and stems of the plant.