nickel processing

nickel processing, preparation of the metal for use in various products.

Although it is best known for its use in coinage, nickel (Ni) has become much more important for its many industrial applications, which owe their importance to a unique combination of properties. Nickel has a relatively high melting point of 1,453 °C (2,647 °F) and a face-centred cubic crystal structure, which gives the metal good ductility. Nickel alloys exhibit a high resistance to corrosion in a wide variety of media and have the ability to withstand a range of high and low temperatures. In stainless steels, nickel improves the stability of the protective oxide film that provides corrosion resistance. Its major contribution is in conjunction with chromium in austenitic stainless steels, in which nickel enables the austenitic structure to be retained at room temperature. Modern technology is heavily dependent on these materials, which form a vital part of the chemical, petrochemical, power, and related industries.

History

Nickel was used industrially as an alloying metal almost 2,000 years before it was isolated and recognized as a new element. As early as 200 bce the Chinese made substantial amounts of a white alloy from zinc and a copper-nickel ore found in Yunnan province. The alloy, known as pai-t’ung, was exported to the Middle East and even to Europe.

Later, miners in Saxony encountered what appeared to be a copper ore but found that processing it yielded only a useless slaglike material. They considered it bewitched and ascribed it to the devil, “Old Nick.” Thus, it became known as kupfernickel (Old Nick’s copper). It was from this ore, studied by Axel Fredrik Cronstedt, that nickel was isolated and recognized as a new element in 1751. In 1776 it was established that pai-t’ung, now called nickel-silver, was composed of copper, nickel, and zinc.

Demand for nickel-silver was stimulated in England about 1844 by the development of silver electroplating, for which it was found to be the most desirable base. The use of pure nickel as a corrosion-resistant electroplated coating developed a little later; both these uses are still important.

Small amounts of nickel were produced in Germany in the mid-19th century. More substantial amounts came from Norway, and a little came from a mine at Gap, Pennsylvania, in the United States. A new source, New Caledonia in the South Pacific, came into production about 1877 and dominated until the development of the copper-nickel ores of the Copper Cliff–Sudbury, Ontario, region in Canada, which after 1905 became the world’s largest source of nickel. By the late 1970s, production in Soviet Russia had exceeded that in Canada. By the early 21st century, China had become the world leader in nickel production, followed by Russia, Japan, Australia, and Canada.

Ores

Sulfides

Canadian ores are sulfides containing nickel, copper, and iron. The most important nickel mineral is pentlandite, (Ni, Fe)₉S₈, followed by pyrrhotite, usually ranging from FeS to Fe₇S₈, in which some of the iron may be replaced by nickel. Chalcopyrite, CuFeS₂, is the dominant copper mineral in these ores, with small amounts of another copper mineral, cubanite, CuFe₂S₃. Some gold, silver, and the six platinum-group metals also are present, and their recovery is important. Cobalt, selenium, tellurium, and sulfur may be recovered from the ores as well.

Get Unlimited Access

Try Britannica Premium for free and discover more.

Subscribe

Mining

With nickel found in two radically different types of ore, it is not surprising that the mining methods differ. Sulfide deposits are usually mined by underground techniques in a manner similar to copper, although some deposits have been mined using open pits in the early stages. The mining of laterites is basically an earth-moving operation, with large shovels, draglines, or front-end loaders extracting the nickel-rich strata and discarding large boulders and waste material. The ore is loaded into trucks at the face, as would be the case in an open pit, and hauled to the smelter.