Safety testing in animals
- Related Topics:
- industry
- pharmaceutical
News •
A number of safety tests are performed on animals, prior to clinical trials in humans, in order to select the most suitable lead chemical and dosage form for drug development. The safety tests can include studies of acute toxicity, subacute and chronic toxicity, carcinogenicity, reproductive and developmental toxicity, and mutagenicity.
Toxicity tests
In acute toxicity studies, a single large or potentially toxic dose of the drug is administered to animals via the intended route of human administration, and the animals are observed for one to four weeks, depending on the drug. At the end of the observation period, organ and tissue toxicities are evaluated. Acute toxicity studies generally are required to be carried out in two mammalian species prior to beginning any Phase 1 (safety) study in humans. Subchronic toxicity studies (up to three months) and chronic toxicity studies (longer than three months) require daily drug administration and usually do not start until after Phase 1 studies are completed. This is because the drug may be withdrawn after Phase 1 testing and because data on the effect of the drug in humans may be important for the design of longer-duration animal studies. When these studies are required, they are conducted in two mammalian species and are designed to allow for detection of neurological, physiological, biochemical, and hematological abnormalities occurring during the course of the study. Organ and tissue toxicity and pathology are evaluated when the studies are terminated.
The number and type of animal safety tests required varies with the intended duration of human use of the drug. If the drug is to be used for only a few days in humans, acute and subacute animal toxicity studies may be all that is required. If the human drug use is for six months or longer, animal toxicity studies of six months or more may be required before the drug is marketed. Carcinogenicity (potential to cause cancer) studies are generally required if humans will use the drug for longer than six months. They usually are conducted concurrently with Phase 3 (large-scale safety and efficacy) clinical trials but may begin earlier if there is reason to suspect that the drug is a carcinogen.
Teratogenicity and mutagenicity tests
If a drug is intended for use during pregnancy or in women of childbearing potential, animal reproductive and developmental toxicity studies are indicated. These studies include tests that evaluate male and female fertility, embryonic and fetal death, and teratogenicity (induction of severe birth defects). Also evaluated are the integrity of the lactation process and the quality of care for her young provided by the mother.
Genetic toxicity, or mutagenicity, studies have become an integral component of regulatory requirements. Since no one mutagenicity test can evaluate all types of genetic toxicity, two or three tests are usually performed. Typical mutagenicity tests include a bacterial point mutation test (the Ames test), a chromosomal aberrations test in mammalian cells in vitro, and an in vivo (intact animals) test.
Biopharmaceutical studies
Pharmacokinetic investigation
In addition to the animal toxicity studies outlined above, biopharmaceutical studies are required for all new drugs. The chemical makeup of the drug and the dosage form of the drug to be used in trials must be described. The stability of the drug in the dosage form and the ability of the dosage form to release the drug appropriately have to be evaluated. Bioavailability (how completely the drug is absorbed from its dosage form) and pharmacokinetic studies in animals and humans also have become important to include in a drug development plan. Pharmacokinetics is the study of the rates and extent of drug absorption, distribution within the body, metabolism, and excretion. Pharmacokinetic studies give investigators information about how often a drug should be taken to achieve adequate blood levels. The metabolism and excretion data can also provide clues about whether a new drug will interact with other drugs a patient may be taking. For example, if two drugs are inactivated (metabolized or excreted) via the same biological process, one or even both of the drugs might have its sojourn in the body prolonged, resulting in increased blood levels and increased toxicity. Conversely, some drugs induce the metabolism and shorten the body sojourn of other drugs, resulting in blood levels inadequate to produce the desired pharmacological effect.
Dosage form development
Drugs are rarely administered to a patient solely as a pure chemical entity. For clinical use they are almost always administered as a formulation designed to deliver the drug in a manner that is safe, effective, and acceptable to the patient. One of the most important objectives of dosage form design is to produce a product that will achieve a predictable and reliable therapeutic response. The dosage form must also be suitable for manufacture on a large scale with reproducible quality. The table shows routes of drug administration and common dosage forms.
| route of administration | common dosage forms used |
|---|---|
| oral | tablets, capsules, solutions, syrups, elixirs, suspensions, powders |
| sublingual (under tongue) | tablets, lozenges |
| parenteral (by injection) | solutions, suspensions |
| epidermal/transdermal (on or through skin) | ointments, creams, lotions, transdermal patches |
| intranasal (in nostrils) | solutions, sprays, ointments, creams |
| intrarespiratory (by inhalation) | aerosols |
| rectal | solutions, ointments, creams, suppositories |
| vaginal | solutions, ointments, creams, suppositories |
Tablets
Tablets are by far the most common dosage form. Normally, they are intended for the oral or the sublingual routes of administration. They are made by compressing powdered drug along with various excipients in a tablet press. Excipients are more or less inert substances added to the powdered drug in order to (1) facilitate the tablet-making process, (2) bind the tablet together so it will not break apart during shipping and handling, (3) facilitate dissolution after the tablet has been consumed, (4) enhance appearance and patient acceptance, and (5) allow for identification. Frequently, the active ingredient makes up a relatively small percentage of the weight of a tablet. Tablets with two or three milligrams of active drug may weigh several hundred milligrams. Tablets for oral administration may be coated with inert substances such as wax. Uncoated tablets have a slight powdery appearance and feel at the tablet surface. Coatings usually produce a tablet with a smooth, shiny appearance and decrease the likelihood that the patient will taste the tablet contents when the tablet is in the mouth before swallowing. Enteric coated tablets have a coating that is designed not to dissolve in the acidic environment of the stomach but to pass through the stomach into the small intestine prior to the beginning of dissolution. Sublingual tablets generally do not have a coating and are designed so that they will dissolve when placed under the tongue.
Tablets are traditionally referred to as pills. Prior to the widespread use of the machine-compressed tablet, pills were very popular products that usually were prepared by a pharmacist. To make a pill, powdered drug and excipients were mixed together with water or other liquid and a gumlike binding agent such as acacia or tragacanth. The mixture was made into a plastic mass and rolled into a tube. The tube was cut into small sections that were rolled to form spheres, thereby making pills. Pills fell into disfavour because they are more expensive to make than tablets or capsules and because the amount of drug released from pills varies more than from tablets or capsules.
Capsules
Capsules are another common oral dosage form. Like tablets, capsules almost always contain inert ingredients to facilitate manufacture. There are two general types of capsules—hard gelatin capsules and soft gelatin capsules. Hard gelatin capsules are by far the most common type. They can be filled with powder, granules, or pellets. In some cases they are filled with a small capsule plus powder or a small tablet plus powder. Typically, the small internal capsule or tablet contains one or more of the active ingredients. Soft gelatin capsules may contain a liquid or a solid. Both hard and soft gelatin capsules are designed to mask unpleasant tastes.
Other solid dosage forms
Other solid dosage forms include powders, lozenges, and suppositories. Powders are mixtures of active drug and excipients that usually are sold in the form of powder papers. The powder is contained inside a folded and sealed piece of special paper. Lozenges usually consist of a mixture of sugar and either gum or gelatin, which are compressed to form a solid mass. Lozenges are designed to release drug while slowly dissolving in the mouth. Suppositories are solid dosage forms designed for introduction into the rectum or vagina. Typically, they are made of substances that melt or dissolve at body temperature, thereby releasing the drug from its dosage form.
Liquid dosage forms
Liquid dosage forms are either solutions or suspensions of active drug in a liquid such as water, alcohol, or other solvent. Since liquid dosage forms for oral use bring the drug and vehicle into contact with the mouth and tongue, they often contain various flavours and sweeteners to mask unpleasant tastes. They usually also require sterilization or addition of preservatives to prevent contamination or degradation. Syrups are water-based solutions of drug containing high concentrations of sugar. They usually also contain added flavours and colours. Some syrups contain up to 85 percent sugar on a weight-to-volume basis. Elixirs are sweetened hydro-alcoholic (water and alcohol) liquids for oral use. Typically, alcohol and water are used as solvents when the drug will not dissolve in water alone. In addition to active drug, they usually contain flavouring and colouring agents to improve patient acceptance.
Since some drugs will not dissolve in solvents suitable for medicinal use, they are made into suspensions. Suspensions consist of a finely divided solid dispersed in a water-based liquid. Like solutions and elixirs, suspensions often contain preservatives, sweeteners, flavours, and dyes to enhance patient acceptance. They frequently also contain some form of thickening or suspending agent to decrease the rate at which the suspended drug settles to the container bottom. Emulsions consist of one liquid suspended in another. Oil-in-water emulsions will mix readily with water-based liquids, while water-in-oil emulsions mix more easily with oils. Milk is a common example of an oil-in-water emulsion. In order to prevent the separation of the two liquids, most pharmaceutical emulsions contain a naturally occurring emulsifying agent such as cholesterol or tragacanth or a synthetic emulsifying agent such as a nonionic detergent. Antimicrobial agents may also be included in emulsions in order to prevent the growth of microorganisms in the aqueous phase. Emulsions are created using a wide variety of homogenizers, agitators, or sonicators.
Semisolid dosage forms
Semisolid dosage forms include ointments and creams. Ointments are preparations for external use, intended for application to the skin. Typically, they have an oily or greasy consistency and can appear “stiff” as they are applied to the skin. Ointments contain drug that may act on the skin or be absorbed through the skin for systemic action. Many ointments are made from petroleum jelly. Like many other pharmaceutical preparations, they frequently contain preservatives and may also contain aromatic substances and dyes to enhance patient acceptance. Although there is generally no agreed-upon pharmaceutical definition for creams, they are very much like ointments in their use. Their composition is somewhat like that of ointments except that creams often have water-in-oil emulsions as the base of the formulation. When applied to the skin, creams feel soft and supple and spread easily.
Specialized dosage forms
Specialized dosage forms of many types exist. Sprays are most often used to irrigate nasal passages or to introduce drugs into the nose. Most nasal sprays are intended for treatment of colds or respiratory tract allergies. They contain medications designed to relieve nasal congestion and to decrease nasal discharges. Aerosols are pressurized dosage forms that are expelled from their container upon activation of a release valve. Aerosol propellants typically are compressed, liquefied volatile gases. Other aerosol ingredients are either suspended or dissolved in the propellant. When the release valve is activated, the liquid is expelled into the air at atmospheric pressure. This causes the propellant to vaporize, leaving very finely subdivided liquid or solid particles dispersed in the vaporized propellant. Some aerosols are intended for delivery of substances such as local anesthetics, disinfectants, and spray-on bandages to the skin. Metered-dose aerosols typically are used to deliver calibrated doses of drug to the respiratory tract. Usually, the metered-dose aerosol or inhaler is placed in the mouth for use. When the release valve is activated, a predetermined dose of drug is expelled. The patient inhales the expelled drug, delivering it to the bronchial airways. Patches are dosage forms intended to deliver drug across the skin and are placed on the skin much like a self-adhesive bandage. The patch is worn for a predetermined length of time in order to deliver the correct amount of drug to the systemic circulation.
Modified-release dosage forms
Modified-release dosage forms have been developed to deliver drug to the part of the body where it will be absorbed, to simplify dosing schedules, and to assure that concentration of drug is maintained over an appropriate time interval. One type of modified-release dosage form is the enteric coated tablet. Enteric coating prevents irritation of the stomach by the drug and protects the drug from stomach acid. Most modified-release dosage forms are tablets and capsules designed to deliver drug to the circulating blood over an extended time period. A tablet that releases its drug contents immediately may need to be taken as many as four or six times a day to produce the desired blood-concentration level and therapeutic effect. Such a drug might be formulated into an extended-release dosage form so that the modified tablet or capsule need be taken only once or twice a day. Repeat-action tablets are one type of extended-release dosage form. They usually contain two single doses of medication, one for immediate release and one for delayed release. Typically, the immediately released drug comes from the exterior portion of the tablet, with the delayed release coming from the interior portion. Essentially, there is a tablet within a tablet, with the interior tablet having a coating that delays release of its contents for a predetermined time.
An additional type of extended-release dosage form is accomplished by incorporating coated beads or granules into tablets or capsules. Drug is distributed onto or into the beads. Some of the granules are uncoated for immediate release while others receive varying coats of lipid, which delays release of the drug. Another variation of the coated bead approach is to granulate the drug and then microencapsulate some of the granules with gelatin or a synthetic polymer. Microencapsulated granules can be incorporated into a tablet or capsule with the release rate for the drug being determined by the thickness of the coating. Embedding drug into a slowly eroding hydrophilic matrix can also allow for sustained release. As the tablet matrix hydrates in the intestine, it erodes and the drug is slowly released. Another type of sustained release is produced by embedding drug into an inert plastic matrix. To accomplish this, drug is mixed with a polymer powder that forms a solid matrix when the tablet is compressed by a tablet machine. The drug leaches out of the matrix as the largely intact tablet passes through the gastrointestinal tract. Drug may be adsorbed onto ion exchange resins in order to bring about sustained release. For example, a cationic, or positively charged, drug can be bound to an anionic, or negatively charged, resin. The resin can be incorporated into tablets, capsules, or liquids. As the resin passes through the small intestine, the drug is released slowly.
Parenteral dosage forms
Parenteral dosage forms are intended for administration as an injection or infusion. Common injection types are intravenous (into a vein), subcutaneous (under the skin), and intramuscular (into muscle). Infusions typically are given by intravenous route. Parenteral dosage forms may be solutions, suspensions, or emulsions, but they must be sterile. If they are to be administered intravenously, they must readily mix with blood.
Radiopharmaceuticals
Radioactive dosage forms, or radiopharmaceuticals, are substances that contain one or more radioactive atoms and are used for diagnosis or treatment of disease. In some cases the radioactive atoms are incorporated into a larger molecule. The larger molecule helps to direct the radioactive atoms to the organ or tissue of interest. In other cases the diagnostic or therapeutic molecule is the radioactive atom itself. For example, radioactive iodine, such as iodine-131, can be used in thyroid studies, and radioactive gases, such as xenon-133, can be used for lung function studies. However, more often than not, the radioactive atom allows detection or imaging of the tissue of interest, and the physiological or pharmacological properties of the larger molecule direct the radiopharmaceutical to the target tissue. For diagnostic purposes, radiopharmaceuticals are administered in amounts as small as possible so as not to perturb the biological process being evaluated in the diagnosis. For therapeutic purposes, such as treatment of various types of cancer, it is the radiation produced by the radioactive atom that kills the tumour cells. As is the case for many diagnostic agents, the pharmacological effect produced by the larger molecule, into which the radioactive atom is incorporated, is of little or no consequence for the therapeutic effect of the radiopharmaceutical. Many authorities believe that monoclonal antibodies will become powerful tools for directing radiopharmaceuticals to specific tumours, thereby revolutionizing the treatment of cancer.