Special techniques and applied photography
- Related Topics:
- history of photography
High-speed and stroboscopic photography
High-speed photography is generally concerned with exposure times shorter than about 1/1,000 second (one millisecond) and often exposures shorter than 1/1,000,000 second (one microsecond). This field partly overlaps that of high-speed cinematography—sequences of very short exposures. Exposure times can be reduced by high-speed shutter systems or by short-duration flash sources.
High-speed photography, together with high-speed cinematography, aids in the study of missiles, explosions, nuclear reactions, and other phenomena of military and scientific interest. In industry high-speed pictures show up movement phases of machinery, relays, and switches; dynamic fractures of materials or insulation breakdown; and, in natural science studies, flight movement of birds and insects.
High-speed shutters
The shortest exposure with mechanical shutters is about 1/4,000 second. Special high-speed shutter systems are magneto-optical, electro-optical, or electronic. A magneto-optical shutter (Faraday shutter) consists of a glass cylinder placed inside a magnetic coil between two crossed polarizing filters; so long as the filters remain crossed, virtually no light can pass through. A brief current pulse through the coil generates a magnetic field that rotates the light’s plane of polarization in the cylinder so that during the pulse some light passes through the second polarizing filter. The electro-optical shutter (Kerr cell) is made up of a liquid cell of nitrobenzene fitted with electrodes and again placed between two crossed polarizers. An electric pulse applied to the electrodes changes the polarization properties of the nitrobenzene so that this arrangement again transmits light. Minimum exposure time is around five nanoseconds (5 × 10-9 second). Image converter tubes electronically transmit and amplify an optical image focused on one end of a tube onto a phosphorescent screen at the other end. Electrons flow in the tube only in the presence of an electric field, which can be controlled by short-time pulses down to a few nanoseconds.
High-speed light sources
The shortest electronic-flash duration is around one microsecond. Spark discharges in air between electrodes yield still shorter exposures; discharge voltage may go up to tens or hundreds of thousands of volts. Short-duration pulses applied to X-ray tubes produce X-ray flashes for high-speed radiography. The shortest exposures are between 20 and 50 nanoseconds. Special switching modes turn lasers into high-speed sources with durations down to a fraction of a nanosecond.
Synchronization
Generally the event photographed is made to trigger the exposure (the current pulse to operate the shutter or flash or spark source) to ensure correct synchronization. Examples are bullets interrupting a light beam to a photocell or self-luminous phenomena (explosions) triggering the system via a photocell circuit. The event and the exposure may be also triggered together by a signal from a common source.
Stroboscopic photography
Electronic-flash units designed to flash in rapid succession (up to several hundred times a second) can photograph a moving subject in front of a stationary camera with its shutter open to yield multiple images of successive movement phases. The technique has been used in pictorial and sports photography (e.g., recording the movement of dancers or golfers) and for analyzing movement cycles without a motion-picture camera. Stroboscopic flash can be synchronized with a selected movement phase of an object in rapid cyclic motion (e.g., a rotating machine component); the moving component illuminated in this way then appears stationary.
Aerial photography
Photographs from airborne or spaceborne vehicles either provide information on ground features for military and other purposes (reconnaissance) or record the dimensional disposition of such features (surveying).
Reconnaissance photographs call for maximum sharpness and detail rendering. Infrared films are often used to bring out details not discernible visually. In nonmilitary applications such photographs may reveal ecological factors (tree diseases, crop variations) and traces of archaeological sites not visible from the ground. Such shots are generally taken with cameras using 5- or 91/2-inch roll film in large magazines, built into the aircraft and operated electrically by the pilot or other crew member, or automatically at set intervals. Some systems incorporate a shutterless technique; the film runs continuously past a slit at a rate matched exactly to the image movement in the camera’s focal plane as the aircraft flies over the ground (image motion compensation).
Aerial survey is a systematic procedure of photographing the ground for map production; exposures are made at intervals to partly overlap the view of successive pictures. The individual photographs are enlarged to the same degree and then assembled in a precise mosaic. Aerial photographs taken under precisely specified conditions can serve for accurate measurements of ground details by stereoscopic evaluation (see below Stereoscopic and three-dimensional photography).
Satellite and space photography
Satellites orbiting the Earth record changing meteorologic features (weather satellites) and broadcast the video images to ground stations where they may be recorded on magnetic tape or converted to hard-copy pictures by suitable printers. Video cameras in spacecraft sent to record surface details of other planets similarly scan electronically the view taken in by a lens and beam the scanning signals back to Earth, where they are recorded and reconverted to visible images. The signals are usually processed electronically to enhance image information and detail. Such enhancement often brings out more information than can be recorded by conventional photography. Similar techniques are used by military satellites monitoring ground features from high orbits above the Earth.
Underwater photography
Underwater photography requires either special watertight cameras or pressure-resistant housings for normal cameras. In both cases camera functions are controlled through pressure-tight glands. A flat glass or plastic window is usually in front of the camera lens. The red and yellow absorption of the water more than a few feet below the surface turns colour photographs taken by daylight into virtually monochrome shots; hence artificial light is essential to show up the full colour range of fish and other underwater subjects. Light sources are battery-powered tungsten or tungsten-halogen lamps or electronic flash units (again in self-contained pressure-proof housings). For comfortable handling the weight of the housing with camera is adjusted to slight negative buoyancy. Complete camera and lighting outfits may be built into sledgelike or torpedo-like units with an electric or compressed-air motor for self-propulsion through the water.
Since the refractive index ratio of glass to water is lower than for glass to air, the light-bending power of a glass lens is less in water than in air. This factor reduces the lens’s angle of view and makes objects appear at about three-fourths of their actual distance. This difference must be allowed for in focusing—possibly by a suitably calibrated distance scale or by fitting the housing with a compensating porthole, which acts as a diverging lens.
Underwater cameras with lenses designed for direct contact with the water eliminate the air space between the lens and the porthole. Such lenses can cover wider angles of view without distortion, but they do not give sharp images outside the water.