It is standard practice to use dashes to represent any line of an object that is hidden from view. A drafter—in deciding whether a line in a view should be represented as hidden or as visible—relies on the fact that in third-angle projection the near side of the object is near the adjacent view, but in first-angle projection the near side of the object is remote from the adjacent view. In Figure 4B (third-angle projection) the top of the front view is near the top view; the front of the top view is near the front view; and the front of the side view is near the front view. In first-angle projection, however, the top of the front view is remote from the top view; the front of the top view is remote from the front view, and the front of the side view is remote from the front view. In a third-angle projection, what is remote in an adjacent view cannot hide what is near in that view.

Figure 5 shows a pictorial representation of an object and the third-angle projections of that object. The arrangement of the three views gives intuitive reinforcement to the correct selection of the line shown as hidden in each view because it is blocked by portions of the object that are nearer in the adjacent views. The number of hidden lines in a view of a complicated object may be very great. For purposes of studying visibility, the direction of projection may be thought of as always vertically downward for a top view, always horizontally from front to back for a front view, and always horizontally right-to-left for a right-side view.

In Figure 5 the hidden lines in the views could be identified by visualizing the object, a process that can be quite difficult for complicated objects. The following basic principle of descriptive geometry is useful in analyzing such a problem:

I. If any point is projected orthogonally onto each of two perpendicular planes and the planes are rotated into coincidence about their line of intersection, then the projections of the point on the two planes will lie on a straight line perpendicular to the line of intersection.

Figure 6 demonstrates this statement. Although the ground line, or line of intersection of H and V, is seldom drawn in the representations of front and top or of front, top, and side views of objects, it is understood to be horizontal. Thus for any point P, P^H and P^V lie on a vertical line of the drawing.

A tetrahedron (triangular pyramid) with vertices A, B, C, and D is shown in third-angle projection in Figure 7 . The edges AC and BD do not intersect, although their projections do. To determine which of these two edges is visible in the top view, the drafter considers location M, where the H projection of a point on AC and the H projection of a point on BD coincide. By principle I the V projections of these two points will lie on a vertical line from the crossing of A^HC^H and B^HD^H. A vertical construction line in Figure 7 indicates that the point on BD is nearer to the top of the tetrahedron than the point on AC. This means that BD crosses above AC, so that BD must be visible in the top view and AC hidden. Similarly, to study the visibility of these lines in the front view, the vertical construction line is drawn through Q, the crossing of A^VC^V and B^VD^V; this procedure indicates that the point on BD is nearer to the front of the tetrahedron than the point on AC. Thus BD crosses in front of AC, so that BD is visible in the front view and AC is hidden.