Star populations and movement

Principal population types

In 1944 the German-born astronomer Walter Baade announced the successful resolution into stars of the centre of the Andromeda Galaxy, M31, and its two elliptical companions, M32 and NGC 205. He found that the central parts of Andromeda and the accompanying galaxies were resolved at very much fainter magnitudes than were the outer spiral arm areas of M31. Furthermore, by using plates of different spectral sensitivity and coloured filters, he discovered that the two ellipticals and the centre of the spiral had red giants as their brightest stars rather than blue main-sequence stars, as in the case of the spiral arms. This finding led Baade to suggest that these galaxies, and also the Milky Way Galaxy, are made of two populations of stars that are distinct in their physical properties as well as their locations. He applied the term Population I to the stars that constitute the spiral arms of Andromeda and to most of the stars that are visible in the Milky Way system in the neighbourhood of the Sun. He found that these Population I objects were limited to the flat disk of the spirals and suggested that they were absent from the centres of such galaxies and from the ellipticals entirely. Baade designated as Population II the bright red giant stars that he discovered in the ellipticals and in the nucleus of Andromeda. Other objects that seemed to contain the brightest stars of this class were the globular clusters of the Galaxy. Baade further suggested that the high-velocity stars near the Sun were Population II objects that happened to be passing through the disk.

As a result of Baade’s pioneering work on other galaxies in the Local Group (the cluster of star systems to which the Milky Way Galaxy belongs), astronomers immediately applied the notion of two stellar populations to the Galaxy. It is possible to segregate various components of the Galaxy into the two population types by applying both the idea of kinematics of different populations suggested by their position in the Andromeda system and the dynamical theories that relate galactic orbital properties with z distances (the distances above the plane of the Galaxy) for different stars. For many of these objects, the kinematic data on velocities are the prime source of population classification. The Population I component of the Galaxy, highly limited to the flat plane of the system, contains such objects as open star clusters, O and B stars, Cepheid variables, emission nebulae, and neutral hydrogen. Its Population II component, spread over a more nearly spherical volume of space, includes globular clusters, RR Lyrae variables, high-velocity stars, and certain other rarer objects.

As time progressed, it was possible for astronomers to subdivide the different populations in the Galaxy further. These subdivisions ranged from the nearly spherical “halo Population II” system to the very thin “extreme Population I” system. Each subdivision was found to contain (though not exclusively) characteristic types of stars, and it was even possible to divide some of the variable-star types into subgroups according to their population subdivision. The RR Lyrae variables of type ab, for example, could be separated into different groups by their spectral classifications and their mean periods. Those with mean periods longer than 0.4 days were classified as halo Population II, while those with periods less than 0.4 days were placed in the “disk population.” Similarly, long-period variables were divided into different subgroups, such that those with periods of less than 250 days and of relatively early spectral type (earlier than M5e) were considered “intermediate Population II,” whereas the longer period variables fell into the “older Population I” category. As dynamical properties were more thoroughly investigated, many astronomers divided the Galaxy’s stellar populations into a "thin disk," a "thick disk," and a "halo."

An understanding of the physical differences in the stellar populations became increasingly clearer during the 1950s with improved calculations of stellar evolution. Evolving-star models showed that giants and supergiants are evolved objects recently derived from the main sequence after the exhaustion of hydrogen in the stellar core. As this became better understood, it was found that the luminosity of such giants was not only a function of the masses of the initial main-sequence stars from which they evolved but was also dependent on the chemical composition of the stellar atmosphere. Therefore, not only was the existence of giants in the different stellar populations understood, but differences between the giants with relation to the main sequence of star groups came to be understood in terms of the chemistry of the stars.

At the same time, progress was made in determining the abundances of stars of the different population types by means of high-dispersion spectra obtained with large reflecting telescopes having a coudé focus arrangement. A curve of growth analysis demonstrated beyond a doubt that the two population types exhibited very different chemistries. In 1959 H. Lawrence Helfer, George Wallerstein, and Jesse L. Greenstein of the United States showed that the giant stars in globular clusters have chemical abundances quite different from those of Population I stars such as typified by the Sun. Population II stars have considerably lower abundances of the heavy elements—by amounts ranging from a factor of 5 or 10 up to a factor of several hundred. The total abundance of heavy elements, Z, for typical Population I stars is 0.04 (given in terms of the mass percent for all elements with atomic weights heavier than helium, a common practice in calculating stellar models). The values of Z for halo population globular clusters, on the other hand, were typically as small as 0.003.

A further difference between the two populations became clear as the study of stellar evolution advanced. It was found that Population II was exclusively made up of stars that are very old. Estimates of the age of Population II stars have varied over the years, depending on the degree of sophistication of the calculated models and the manner in which observations for globular clusters are fitted to these models. They have ranged from 10⁹ years up to 2 × 10¹⁰ years. Recent comparisons of these data suggest that the halo globular clusters have ages of approximately 1.1–1.3 × 10¹⁰ years. The work of American astronomer Allan Sandage and his collaborators proved without a doubt that the range in age for globular clusters was relatively small and that the detailed characteristics of the giant branches of their colour-magnitude diagrams were correlated with age and small differences in chemical abundances. On the other hand, stars of Population I were found to have a wide range of ages. Stellar associations and galactic clusters with bright blue main-sequence stars have ages of a few million years (stars are still in the process of forming in some of them) to a few hundred million years. Studies of the stars nearest the Sun indicate a mixture of ages with a considerable number of stars of great age—on the order of 10⁹ years. Careful searches, however, have shown that there are no stars in the solar neighbourhood and no galactic clusters whatsoever that are older than the globular clusters. This is an indication that globular clusters, and thus Population II objects, formed first in the Galaxy and that Population I stars have been forming since.

In short, as the understanding of stellar populations grew, the division into Population I and Population II became understood in terms of three parameters: age, chemical composition, and kinematics. A fourth parameter, spatial distribution, appeared to be clearly another manifestation of kinematics. The correlations between these three parameters were not perfect but seemed to be reasonably good for the Galaxy, even though it was not yet known whether these correlations were applicable to other galaxies. As various types of galaxies were explored more completely, it became clear that the mix of populations in galaxies was correlated with Hubble type. Spiral galaxies such as the Milky Way Galaxy have Population I concentrated in the spiral disk and Population II spread out in a thick disk and/or a spherical halo. Elliptical galaxies are nearly pure Population II, while irregular galaxies are dominated by a thick disk of Population I, with only a small number of Population II stars. Furthermore, the populations vary with galaxy mass; while the Milky Way Galaxy, a massive example of a spiral galaxy, contains no stars of young age and a low heavy-metal abundance, low-mass galaxies, such as the dwarf irregulars, contain young, low heavy-element stars, as the buildup of heavy elements in stars has not proceeded far in such small galaxies.

The stellar luminosity function

The stellar luminosity function is a description of the relative number of stars of different absolute luminosities. It is often used to describe the stellar content of various parts of the Galaxy or other groups of stars, but it most commonly refers to the absolute number of stars of different absolute magnitudes in the solar neighbourhood. In this form it is usually called the van Rhijn function, named after the Dutch astronomer Pieter J. van Rhijn. The van Rhijn function is a basic datum for the local portion of the Galaxy, but it is not necessarily representative for an area larger than the immediate solar neighbourhood. Investigators have found that elsewhere in the Galaxy, and in the external galaxies (as well as in star clusters), the form of the luminosity function differs in various respects from the van Rhijn function.

The detailed determination of the luminosity function of the solar neighbourhood is an extremely complicated process. Difficulties arise because of (1) the incompleteness of existing surveys of stars of all luminosities in any sample of space and (2) the uncertainties in the basic data (distances and magnitudes). In determining the van Rhijn function, it is normally preferable to specify exactly what volume of space is being sampled and to state explicitly the way in which problems of incompleteness and data uncertainties are handled.

In general there are four different methods for determining the local luminosity function. Most commonly, trigonometric parallaxes are employed as the basic sample. Alternative but somewhat less certain methods include the use of spectroscopic parallaxes, which can involve much larger volumes of space. A third method entails the use of mean parallaxes of a star of a given proper motion and apparent magnitude; this yields a statistical sample of stars of approximately known and uniform distance. The fourth method involves examining the distribution of proper motions and tangential velocities (the speeds at which stellar objects move at right angles to the line of sight) of stars near the Sun.

Because the solar neighbourhood is a mixture of stars of various ages and different types, it is difficult to interpret the van Rhijn function in physical terms without recourse to other sources of information, such as the study of star clusters of various types, ages, and dynamical families. Globular clusters are the best samples to use for determining the luminosity function of old stars having a low abundance of heavy elements (Population II stars).

Globular-cluster luminosity functions show a conspicuous peak at absolute magnitude M_V = 0.5, and this is clearly due to the enrichment of stars at that magnitude from the horizontal branch of the cluster. The height of this peak in the data is related to the richness of the horizontal branch, which is in turn related to the age and chemical composition of the stars in the cluster. A comparison of the observed M3 luminosity function with the van Rhijn function shows a depletion of stars, relative to fainter stars, for absolute magnitudes brighter than roughly M_V = 3.5. This discrepancy is important in the discussion of the physical significance of the van Rhijn function and luminosity functions for clusters of different ages and so will be dealt with more fully below.

Many studies of the component stars of open clusters have shown that the luminosity functions of these objects vary widely. The two most conspicuous differences are the overabundance of stars of brighter absolute luminosities and the underabundance or absence of stars of faint absolute luminosities. The overabundance at the bright end is clearly related to the age of the cluster (as determined from the main-sequence turnoff point) in the sense that younger star clusters have more of the highly luminous stars. This is completely understandable in terms of the evolution of the clusters and can be accounted for in detail by calculations of the rate of evolution of stars of different absolute magnitudes and mass. For example, the luminosity function for the young clusters h and χ Persei, when compared with the van Rhijn function, clearly shows a large overabundance of bright stars due to the extremely young age of the cluster, which is on the order of 10⁶ years. Calculations of stellar evolution indicate that in an additional 10⁹ or 10¹⁰ years all of these stars will have evolved away and disappeared from the bright end of the luminosity function.

In 1955 the first detailed attempt to interpret the shape of the general van Rhijn luminosity function was made by the Austrian-born American astronomer Edwin E. Salpeter, who pointed out that the change in slope of this function near M_V = +3.5 is most likely the result of the depletion of the stars brighter than this limit. Salpeter noted that this particular absolute luminosity is very close to the turnoff point of the main sequence for stars of an age equal to the oldest in the solar neighbourhood—approximately 10¹⁰ years. Thus, all stars of the luminosity function with fainter absolute magnitudes have not suffered depletion of their numbers because of stellar evolution, as there has not been enough time for them to have evolved from the main sequence. On the other hand, the ranks of stars of brighter absolute luminosity have been variously depleted by evolution, and so the form of the luminosity function in this range is a composite curve contributed by stars of ages ranging from 0 to 10¹⁰ years. Salpeter hypothesized that there might exist a time-independent function, the so-called formation function, which would describe the general initial distribution of luminosities, taking into account all stars at the time of formation. Then, by assuming that the rate of star formation in the solar neighbourhood has been uniform since the beginning of this process and by using available calculations of the rate of evolution of stars of different masses and luminosities, he showed that it is possible to apply a correction to the van Rhijn function in order to obtain the form of the initial luminosity function. Comparisons of open clusters of various ages have shown that these clusters agree much more closely with the initial formation function than with the van Rhijn function; this is especially true for the very young clusters. Consequently, investigators believe that the formation function, as derived by Salpeter, is a reasonable representation of the distribution of star luminosities at the time of formation, even though they are not certain that the assumption of a uniform rate of formation of stars can be precisely true or that the rate is uniform throughout a galaxy.

It was stated above that open-cluster luminosity functions show two discrepancies when compared with the van Rhijn function. The first is due to the evolution of stars from the bright end of the luminosity function such that young clusters have too many stars of high luminosity, as compared with the solar neighbourhood. The second discrepancy is that very old clusters such as the globular clusters have too few high-luminosity stars, as compared with the van Rhijn function, and this is clearly the result of stellar evolution away from the main sequence. Stars do not, however, disappear completely from the luminosity function; most become white dwarfs and reappear at the faint end. In his early comparisons of formation functions with luminosity functions of galactic clusters, Sandage calculated the number of white dwarfs expected in various clusters; present searches for these objects in a few of the clusters (e.g., the Hyades) have supported his conclusions.

Open clusters also disagree with the van Rhijn function at the faint end—i.e., for absolute magnitudes fainter than approximately M_V = +6. In all likelihood this is mainly due to a depletion of another sort, the result of dynamical effects on the clusters that arise because of internal and external forces. Stars of low mass in such clusters escape from the system under certain common conditions. The formation functions for these clusters may be different from the Salpeter function and may exclude faint stars. A further effect is the result of the finite amount of time it takes for stars to condense; very young clusters have few faint stars partly because there has not been sufficient time for them to have reached their main-sequence luminosity.

The stellar density near the Sun

The density distribution of stars near the Sun can be used to calculate the mass density of material (in the form of stars) at the Sun’s distance within the Galaxy. It is therefore of interest not only from the point of view of stellar statistics but also in relation to galactic dynamics. In principle, the density distribution can be calculated by integrating the stellar luminosity function. In practice, because of uncertainties in the luminosity function at the faint end and because of variations at the bright end, the local density distribution is not simply derived nor is there agreement between different studies in the final result.

In the vicinity of the Sun, stellar density can be determined from the various surveys of nearby stars and from estimates of their completeness. For example, the RECONS (Research Consortium on Nearby Stars) has sought all stars within 10 parsecs of the Sun and found a density in the solar neighbourhood of about 0.003 star per cubic light-year.

The density distribution of stars can be combined with the luminosity-mass relationship to obtain the mass density in the solar neighbourhood, which includes only stars and not interstellar material. This mass density is about 0.001 solar mass per cubic light-year.

Density distribution of various types of stars

To examine what kinds of stars contribute to the overall density distribution in the immediate solar neighbourhood, various statistical sampling arguments can be applied to catalogs and lists of stars. The result of such a procedure is summarized in the table, which lists some of the kinds of objects and gives the calculated mean density over an appropriate volume centred on the Sun. Note that the figures are given in terms of number density.

The most common stars and those that contribute the most to the local stellar mass density are the red dwarf M (dM) stars, which provide a total of 0.0026 star per cubic light-year. White dwarf stars, which are difficult to observe and of which very few are known, are among the more significant contributors.

Variations in the stellar density

The star density in the wider solar neighbourhood beyond 10 parsecs is not perfectly uniform. The most conspicuous variations occur in the z direction, above and below the plane of the Galaxy, where the number density falls off rapidly. This will be considered separately below. The more difficult problem of variations within the plane is dealt with here.

Density variations are conspicuous for early-type stars (i.e., stars of higher temperatures) even after allowance has been made for interstellar absorption. For the stars earlier than type B3, for example, large stellar groupings in which the density is abnormally high are conspicuous in several galactic longitudes. The Sun in fact appears to be in a somewhat lower density region than the immediate surroundings, where early B stars are relatively scarce. There is a conspicuous grouping of stars, sometimes called the Cassiopeia-Taurus association, that has a centroid at approximately 600 light-years distance. A deficiency of early-type stars is readily noticeable, for instance, in the direction of the constellation Perseus at distances beyond 600 light-years. Of course, the nearby stellar associations are striking density anomalies for early-type stars in the solar neighbourhood. The early-type stars within 2,000 light-years are significantly concentrated at negative galactic latitudes. This is a manifestation of a phenomenon referred to as “the Gould Belt,” a tilt of the nearby bright stars in this direction with respect to the galactic plane, which was first noted by the English astronomer John Herschel in 1847. Such anomalous behaviour is true only for the immediate neighbourhood of the Sun; faint B stars are strictly concentrated along the galactic equator.

Generally speaking, the large variations in stellar density near the Sun are less conspicuous for the late-type dwarf stars (those of lower temperatures) than for the earlier types. This fact is explained as the result of the mixing of stellar orbits over long time intervals available for the older stars, which are primarily those stars of later spectral types. The young stars (O, B, and A types) are still close to the areas of star formation and show a common motion and common concentration due to initial formation distributions. In this connection it is interesting to note that the concentration of A-type stars at galactic longitudes 160° to 210° is coincident with a similar concentration of hydrogen detected by means of 21-cm line radiation. Correlations between densities of early-type stars on the one hand and interstellar hydrogen on the other are conspicuous but not fixed; there are areas where neutral-hydrogen concentrations exist but for which no anomalous star density is found.

The variations discussed above are primarily small-scale fluctuations in star density rather than the large-scale phenomena so strikingly apparent in the structure of other galaxies. It is clear from studies of the external galaxies that the range in star densities existing in nature is immense. For example, the density of stars at the centre of the nearby Andromeda spiral galaxy has been determined to equal 100,000 solar masses per cubic light-year, while the density at the centre of the Ursa Minor dwarf elliptical galaxy is only 0.00003 solar masses per cubic light-year.

Variation of star density with z distances

For all stars, variation of star density above and below the galactic plane rapidly decreases with height. Stars of different types, however, exhibit widely differing behaviour in this respect, and this tendency is one of the important clues as to the kinds of stars that occur in different stellar populations.

The luminosity function of stars is different at different galactic latitudes, and this is still another phenomenon connected with the z distribution of stars of different types. At a height of z = 3,000 light-years, stars of absolute magnitude 13 and fainter are nearly as abundant as at the galactic plane, while stars with absolute magnitude 0 are depleted by a factor of 100.

The values of the scale height for various kinds of objects form the basis for the segregation of these objects into different population types. Such objects as open clusters and Cepheid variables that have very small values of the scale height are the objects most restricted to the plane of the Galaxy, while globular clusters and other extreme Population II objects have scale heights of thousands of parsecs, indicating little or no concentration at the plane. Such data and the variation of star density with z distance bear on the mixture of stellar orbit types. They show the range from those stars having nearly circular orbits that are strictly limited to a very flat volume centred at the galactic plane to stars with highly elliptical orbits that are not restricted to the plane.

Proper motions

The proper motions of the stars in the immediate neighbourhood of the Sun are usually very large, as compared with those of most other stars. Those of stars within 17 light-years of the Sun, for instance, range from 0.44 to 10.36 arc seconds per year. The latter value is that of Barnard’s star, which is the star with the largest known proper motion. The tangential velocity of Barnard’s star is 90 km/sec, and, from its radial velocity (−110.5 km/sec) and distance (6 light-years), astronomers have found that its space velocity (total velocity with respect to the Sun) is 143 km/sec. The distance to this star is rapidly decreasing; it will reach a minimum value of 3.5 light-years about the year 11,800.

Radial velocities

Radial velocities, measured along the line of sight spectroscopically using the Doppler effect, are known for nearly all of the recognized stars near the Sun. Of the 54 systems within 17 light-years, most have well-determined radial velocities. The radial velocities of the rest are not known, either because of faintness or because of problems resulting from the nature of their spectrum. For example, radial velocities of white dwarfs are often very difficult to obtain because of the extremely broad and faint spectral lines in some of these objects. Moreover, the radial velocities that are determined for such stars are subject to further complication because a gravitational redshift generally affects the positions of their spectral lines. The average gravitational redshift for white dwarfs has been shown to be the equivalent of a velocity of −51 km/sec. To study the true motions of these objects, it is necessary to make such a correction to the observed shifts of their spectral lines.

For nearby stars, radial velocities are with very few exceptions rather small. For stars closer than 17 light-years, radial velocities range from −85 km/sec to +263 km/sec. Most values are on the order of ±20 km/sec, with a mean value of 2 km/sec.

Space motions

Space motions comprise a three-dimensional determination of stellar motion. They may be divided into a set of components related to directions in the Galaxy: U, directed away from the galactic centre; V, in the direction of galactic rotation; and W, toward the north galactic pole. For the nearby stars the average values for these galactic components are as follows: U = −8 km/sec, V = −28 km/sec, and W = −12 km/sec. These values are fairly similar to those for the galactic circular velocity components, which give U = −9 km/sec, V = −12 km/sec, and W = −7 km/sec. Note that the largest difference between these two sets of values is for the average V, which shows an excess of 16 km/sec for the nearby stars as compared with the circular velocity. Since V is the velocity in the direction of galactic rotation, this can be understood as resulting from the presence of stars in the local neighbourhood that have significantly elliptical orbits for which the apparent velocity in this direction is much less than the circular velocity. This fact was noted long before the kinematics of the Galaxy was understood and is referred to as the asymmetry of stellar motion.

The average components of the velocities of the local stellar neighbourhood also can be used to demonstrate the so-called stream motion. Calculations based on the Dutch-born American astronomer Peter van de Kamp’s table of stars within 17 light-years, excluding the star of greatest anomalous velocity, reveal that dispersions in the V direction and the W direction are approximately half the size of the dispersion in the U direction. This is an indication of a commonality of motion for the nearby stars; i.e., these stars are not moving entirely at random but show a preferential direction of motion—the stream motion—confined somewhat to the galactic plane and to the direction of galactic rotation.

High-velocity stars

One of the nearest 45 stars, called Kapteyn’s star, is an example of the high-velocity stars that lie near the Sun. Its observed radial velocity is −245 km/sec, and the components of its space velocity are U = 19 km/sec, V = −288 km/sec, and W = −52 km/sec. The very large value for V indicates that, with respect to circular velocity, this star has practically no motion in the direction of galactic rotation at all. As the Sun’s motion in its orbit around the Galaxy is estimated to be approximately 250 km/sec in this direction, the value V of −288 km/sec is primarily just a reflection of the solar orbital motion.

Solar motion calculations from radial velocities

For objects beyond the immediate neighbourhood of the Sun, initially it is necessary to choose a standard of rest (the reference frame) from which the solar motion is to be calculated. This is usually done by selecting a particular kind of star or a portion of space. To solve for solar motion, two assumptions are made. The first is that the stars that form the standard of rest are symmetrically distributed over the sky, and the second is that the peculiar motions—the motions of individual stars with respect to that standard of rest—are randomly distributed. Considering the geometry then provides a mathematical solution for the motion of the Sun through the average rest frame of the stars being considered.

In astronomical literature where solar motion solutions are published, there is often employed a “K-term,” a term that is added to the equations to account for systematic errors, the stream motions of stars, or the expansion or contraction of the member stars of the reference frame. Recent determinations of solar motion from high-dispersion radial velocities have suggested that most previous K-terms (which averaged a few kilometres per second) were the result of systematic errors in stellar spectra caused by blends of spectral lines. Of course, the K-term that arises when a solution for solar motions is calculated for galaxies results from the expansion of the system of galaxies and is very large if galaxies at great distances from the Milky Way Galaxy are included.

Solar motion calculations from proper motions

Solutions for solar motion based on the proper motions of the stars in proper motion catalogs can be carried out even when the distances are not known and the radial velocities are not given. It is necessary to consider groups of stars of limited dispersion in distance so as to have a well-defined and reasonably spatially-uniform reference frame. This can be accomplished by limiting the selection of stars according to their apparent magnitudes. The procedure is the same as the above except that the proper motion components are used instead of the radial velocities. The average distance of the stars of the reference frame enters into the solution of these equations and is related to the term often referred to as the secular parallax. The secular parallax is defined as 0.24h/r, where h is the solar motion in astronomical units per year and r is the mean distance for the solar motion solution.

Solar motion calculations from space motions

For nearby well-observed stars, it is possible to determine complete space motions and to use these for calculating the solar motion. One must have six quantities: α (the right ascension of the star); δ (the declination of the star); μ_α (the proper motion in right ascension); μ_δ (the proper motion in declination); ρ (the radial velocity as reduced to the Sun); and r (the distance of the star). To find the solar motion, one calculates the velocity components of each star of the sample and the averages of all of these.

Solar motion solutions give values for the Sun’s motion in terms of velocity components, which are normally reduced to a single velocity and a direction. The direction in which the Sun is apparently moving with respect to the reference frame is called the apex of solar motion. In addition, the calculation of the solar motion provides dispersion in velocity. Such dispersions are as intrinsically interesting as the solar motions themselves because a dispersion is an indication of the integrity of the selection of stars used as a reference frame and of its uniformity of kinematic properties. It is found, for example, that dispersions are very small for certain kinds of stars (e.g., A-type stars, all of which apparently have nearly similar, almost circular orbits in the Galaxy) and are very large for some other kinds of objects (e.g., the RR Lyrae variables, which show a dispersion of almost 100 km/sec due to the wide variation in the shapes and orientations of orbits for these stars).

Solar motion solutions

The motion of the Sun with respect to the nearest common stars is of primary interest. If stars within about 80 light-years of the Sun are used exclusively, the result is often called the standard solar motion. This average, taken for all kinds of stars, leads to a velocity V_ȯ = 19.5 km/sec. The apex of this solar motion is in the direction of α = 270°, δ = +30°. The exact values depend on the selection of data and method of solution. These values suggest that the Sun’s motion with respect to its neighbours is moderate but certainly not zero. The velocity difference is larger than the velocity dispersions for common stars of the earlier spectral types, but it is very similar in value to the dispersion for stars of a spectral type similar to the Sun. The solar velocity for, say, G5 stars is 10 km/sec, and the dispersion is 21 km/sec. Thus, the Sun’s motion can be considered fairly typical for its class in its neighbourhood. The peculiar motion of the Sun is a result of its relatively large age and a somewhat noncircular orbit. It is generally true that stars of later spectral types show both greater dispersions and greater values for solar motion, and this characteristic is interpreted to be the result of a mixture of orbital properties for the later spectral types, with increasingly large numbers of stars having more highly elliptical orbits.

The term basic solar motion has been used by some astronomers to define the motion of the Sun relative to stars moving in its neighbourhood in perfectly circular orbits around the galactic centre. The basic solar motion differs from the standard solar motion because of the noncircular motion of the Sun and because of the contamination of the local population of stars by the presence of older stars in noncircular orbits within the limits of the reference frame. The most commonly quoted value for the basic solar motion is a velocity of 16.5 km/sec toward an apex with a position α = 265°, δ = 25°.

When the solutions for solar motion are determined according to the spectral class of the stars, there is a correlation between the result and the spectral class. The table summarizes values obtained from various sources and illustrates this fact. The apex of the solar motion, the solar motion velocity, and its dispersion are all correlated with spectral type. Generally speaking (with the exception of the very early type stars), the solar motion velocity increases with decreasing temperature of the stars, ranging from 16 km/sec for late B-type and early A-type stars to 24 km/sec for late K-type and early M-type stars. The dispersion similarly increases from a value near 10 km/sec to a value of 22 km/sec. The reason for this is related to the dynamical history of the Galaxy and the mean age and mixture of ages for stars of the different spectral types. It is quite clear, for example, that stars of early spectral type are all young, whereas stars of late spectral type are a mixture of young and old. Connected with this is the fact that the solar motion apex shows a trend for the latitude to decrease and the longitude to increase with later spectral types.

The solar motion can be based on reference frames defined by various kinds of stars and clusters of astrophysical interest. Data of this sort are interesting because of the way in which they make it possible to distinguish between objects with different kinematic properties in the Galaxy. For example, it is clear that interstellar calcium lines have relatively small solar motion and extremely small dispersion because they are primarily connected with the dust that is limited to the galactic plane and with objects that are decidedly of the Population I class. On the other hand, RR Lyrae variables and globular clusters have very large values of solar motion and very large dispersions, indicating that they are extreme Population II objects that do not all equally share in the rotational motion of the Galaxy. The solar motion of these various objects is an important consideration in determining to what population the objects belong and what their kinematic history has been.

When some of these classes of objects are examined in greater detail, it is possible to separate them into subgroups and find correlations with other astrophysical properties. Take, for example, globular clusters, for which the solar motion is correlated with the spectral type of the clusters. The clusters of spectral types G0–G5 (the more metal-rich clusters) have a mean solar motion of 80 ± 82 km/sec (corrected for the standard solar motion). The earlier globular clusters of types F2–F9, on the other hand, have a mean velocity of 162 ± 36 km/sec, suggesting that they partake much less extensively in the general rotation of the Galaxy. Similarly, the most distant globular clusters have a larger solar motion than the ones closer to the galactic centre. Studies of RR Lyrae variables also show correlations of this sort. The period of an RR Lyrae variable, for example, is correlated with its motion with respect to the Sun. For type ab RR Lyrae variables, periods frequently vary from 0.3 to 0.7 days, and the range of solar motion for this range of period extends from 30 to 205 km/sec, respectively. This condition is believed to be primarily the result of the effects of the spread in age and composition for the RR Lyrae variables in the field, which is similar to, but larger than, the spread in the properties of the globular clusters.

Since the direction of the centre of the Galaxy is well established by radio measurements and since the galactic plane is clearly established by both radio and optical studies, it is possible to determine the motion of the Sun with respect to a fixed frame of reference centred at the Galaxy and not rotating (i.e., tied to the external galaxies). The value for this motion is generally accepted to be 225 km/sec in the direction ℓ^II = 90°. It is not a firmly established number, but it is used by convention in most studies.

In order to arrive at a clear idea of the Sun’s motion in the Galaxy as well as of the motion of the Galaxy with respect to neighbouring systems, solar motion has been studied with respect to the Local Group galaxies and those in nearby space. Hubble determined the Sun’s motion with respect to the galaxies beyond the Local Group and found the value of 300 km/sec in the direction toward galactic longitude 120°, latitude +35°. This velocity includes the Sun’s motion in relation to its proper circular velocity, its circular velocity around the galactic centre, the motion of the Galaxy with respect to the Local Group, and the latter’s motion with respect to its neighbours.

One further question can be considered: What is the solar motion with respect to the universe? In the 1990s the Cosmic Background Explorer first determined a reliable value for the velocity and direction of solar motion with respect to the nearby universe. The solar system is headed toward the constellation Leo with a velocity of 370 km/sec. This value was confirmed in the 2000s by an even more sensitive space telescope, the Wilkinson Microwave Anisotropy Probe.