History
- Related Topics:
- mechanics
- Tresca criterion
Solid mechanics developed in the outpouring of mathematical and physical studies following the great achievement of Newton in stating the laws of motion, although it has earlier roots. The need to understand and control the fracture of solids seems to have been a first motivation. Leonardo da Vinci sketched in his notebooks a possible test of the tensile strength of a wire. Galileo, who died in the year of Newton’s birth (1642), had investigated the breaking loads of rods under tension and concluded that the load was independent of length and proportional to the cross section area, this being a first step toward a concept of stress. He also investigated the breaking loads on beams that were suspended horizontally from a wall into which they were built.
Concepts of stress, strain, and elasticity
The English scientist Robert Hooke discovered in 1660, but published only in 1678, that for many materials the displacement under a load was proportional to force, thus establishing the notion of (linear) elasticity but not yet in a way that was expressible in terms of stress and strain. Edme Mariotte in France published similar discoveries in 1680 and, in addition, reached an understanding of how beams like those studied by Galileo resist transverse loadings—or, more precisely, resist the torques caused by those transverse loadings—by developing extensional and compressional deformations, respectively, in material fibres along their upper and lower portions. It was for the Swiss mathematician and mechanician Jakob Bernoulli to observe, in the final paper of his life, in 1705, that the proper way of describing deformation was to give force per unit area, or stress, as a function of the elongation per unit length, or strain, of a material fibre under tension. The Swiss mathematician and mechanician Leonhard Euler, who was taught mathematics by Jakob’s brother Johann Bernoulli, proposed, among many contributions, a linear relation between stress σ and strain ε, in 1727, of the form σ = Eε, where the coefficient E is now generally called Young’s modulus after the British naturalist Thomas Young, who developed a related idea in 1807.
The notion that there is an internal tension acting across surfaces in a deformed solid was expressed by the German mathematician and physicist Gottfried Wilhelm Leibniz in 1684 and Jakob Bernoulli in 1691. Also, Jakob Bernoulli and Euler introduced the idea that at a given section along the length of a beam there were internal tensions amounting to a net force and a net torque (see below). Euler introduced the idea of compressive normal stress as the pressure in a fluid in 1752. The French engineer and physicist Charles-Augustin Coulomb was apparently the first to relate the theory of a beam as a bent elastic line to stress and strain in an actual beam, in a way never quite achieved by Bernoulli and, although possibly recognized, never published by Euler. He developed the famous expression σ = My/I for the stress due to the pure bending of a homogenous linear elastic beam; here M is the torque, or bending moment, y is the distance of a point from an axis that passes through the section centroid, parallel to the torque axis, and I is the integral of y2 over the section area. The French mathematician Antoine Parent introduced the concept of shear stress in 1713, but Coulomb was the one who extensively developed the idea, first in connection with beams and with the stressing and failure of soil in 1773 and then in studies of frictional slip in 1779.
It was the great French mathematician Augustin-Louis Cauchy, originally educated as an engineer, who in 1822 formalized the concept of stress in the context of a generalized three-dimensional theory, showed its properties as consisting of a 3 × 3 symmetric array of numbers that transform as a tensor, derived the equations of motion for a continuum in terms of the components of stress, and developed the theory of linear elastic response for isotropic solids. As part of his work in this area, Cauchy also introduced the equations that express the six components of strain (three extensional and three shear) in terms of derivatives of displacements for the case in which all those derivatives are much smaller than unity; similar expressions had been given earlier by Euler in expressing rates of straining in terms of the derivatives of the velocity field in a fluid.
Beams, columns, plates, and shells
The 1700s and early 1800s were a productive period during which the mechanics of simple elastic structural elements were developed—well before the beginnings in the 1820s of the general three-dimensional theory. The development of beam theory by Euler, who generally modeled beams as elastic lines that resist bending, as well as by several members of the Bernoulli family and by Coulomb, remains among the most immediately useful aspects of solid mechanics, in part for its simplicity and in part because of the pervasiveness of beams and columns in structural technology. Jakob Bernoulli proposed in his final paper of 1705 that the curvature of a beam was proportional to its bending moment. Euler in 1744 and Johann’s son, Daniel Bernoulli, in 1751 used the theory to address the transverse vibrations of beams, and in 1757 Euler gave his famous analysis of the buckling of an initially straight beam subjected to a compressive loading; such a beam is commonly called a column. Following a suggestion of Daniel Bernoulli in 1742, Euler in 1744 introduced the concept of strain energy per unit length for a beam and showed that it is proportional to the square of the beam’s curvature. Euler regarded the total strain energy as the quantity analogous to the potential energy of a discrete mechanical system. By adopting procedures that were becoming familiar in analytical mechanics and following from the principle of virtual work as introduced in 1717 by Johann Bernoulli for such discrete systems as pin-connected rigid bodies, Euler rendered the energy stationary and in this way developed the calculus of variations as an approach to the equations of equilibrium and motion of elastic structures.
That same variational approach played a major role in the development by French mathematicians in the early 1800s of a theory of small transverse displacements and vibrations of elastic plates. This theory was developed in preliminary form by Sophie Germain and was also worked on by Siméon-Denis Poisson in the early 1810s; they considered a flat plate as an elastic plane that resists curvature. Claude-Louis-Marie Navier gave a definitive development of the correct energy expression and governing differential equation a few years later. An uncertainty of some duration arose in the theory from the fact that the final partial differential equation for the transverse displacement is such that it is impossible to prescribe, simultaneously, along an unsupported edge of the plate, both the twisting moment per unit length of middle surface and the transverse shear force per unit length. This was finally resolved in 1850 by the Prussian physicist Gustav Robert Kirchhoff, who applied virtual work and variational calculus procedures in the framework of simplifying kinematic assumptions that fibres initially perpendicular to the plate’s middle surface remain so after deformation of that surface.
The first steps in the theory of thin shells were taken by Euler in the 1770s; he addressed the deformation of an initially curved beam as an elastic line and provided a simplified analysis of the vibration of an elastic bell as an array of annular beams. Johann’s grandson, Jakob Bernoulli “the Younger,” further developed this model in the last year of his life as a two-dimensional network of elastic lines, but he could not develop an acceptable treatment. Shell theory did not attract attention again until a century after Euler’s work. The first consideration of shells from a three-dimensional elastic viewpoint was advanced by Hermann Aron in 1873. Acceptable thin-shell theories for general situations, appropriate for cases of small deformation, were then developed by the British mathematician, mechanician, and geophysicist Augustus Edward Hough Love in 1888 and by the British mathematician and physicist Horace Lamb in 1890 (there is no uniquely correct theory, as the Dutch applied mechanician and engineer W.T. Koiter and the Soviet mechanician V.V. Novozhilov clarified in the 1950s; the difference between predictions of acceptable theories is small when the ratio of shell thickness to a typical length scale is small). Shell theory remained of immense interest well beyond the mid-1900s, in part because so many problems lay beyond the linear theory (rather small transverse displacements often dramatically alter the way that a shell supports load by a combination of bending and membrane action) and in part because of the interest in such lightweight structural forms for aeronautical technology.