Skiing equipment

Early skis designed for sport and recreation were made from one piece of wood, often hickory, but laminated constructions began to be used in the 1930s. In the 1950s plastic running surfaces on the bottom of skis increased their speed and durability. By the 1990s skis were typically made by surrounding a foam core with wood, wrapping both layers with fibreglass combined with Kevlar, aluminum, titanium, or carbon for strength, and finally adding a plastic base. As early as the 19th century, Norwegians and others had designed skis with sides that curved up to form parabolic profiles when seen from an end. Parabolic skis began to be widely used in the 1990s and are now standard for all Alpine skis. The unique shape of parabolic skis allows novices and intermediate skiers to master difficult turns more easily. Participation in recreational and competitive skiing continues to increase in popularity among people with disabilities, for whom specially modified equipment has been designed.

Typically the length of men’s and women’s Alpine skis should be close to the height of the skier, though somewhat longer skis can be handled by heavier or more experienced skiers. Alpine skis are generally about 3 inches (7.6 cm) wide. Cross-country skis are somewhat longer, narrower, and lighter than Alpine skis, and freestyle skis are somewhat shorter than Alpine skis. All types of skis—downhill (including slalom), jumping, cross-country (both for racing and touring), and freestyle—are pointed, turned up, and usually slightly wider at the tip (front) and shovel and squared at the tail (rear). They are thickest at the waist (midsection) under the foot and thinnest just before the ends. Skis are built with a camber, or a slight arch, so as to distribute the skier’s weight along the length of the ski. Alpine skis once had a shallow groove running lengthwise along the centre of the bottom to give directional stability, but that feature is no longer necessary with parabolic skis. Alpine skis have sharp steel edges along the bottom to bite into hard snow or ice. Jumping skis are about 8.5 feet (2.6 metres) long and are wider, thicker, and heavier than downhill skis. They ordinarily have three grooves in the bottom and no steel edges.

Close-fitting heavy plastic boots, held firmly by bindings (with release features in case the skier falls), are necessary equipment for all skiers. Alpine and freestyle boots have flat, stiff soles to help maintain precise control of the skis. Lighter, more flexible boots, with a binding that allows the heel to be raised, are worn for jumping and cross-country skiing.

Alpine skiers carry a light pole of metal tubing about 4 feet (1.2 metres) long in each hand. Cross-country skiers typically carry longer and lighter poles. Poles aid the skier in pushing along on level terrain, in climbing, and in maintaining balance when racing downhill or turning. Each pole has a ring or wheel near the bottom, which prevents the point from sinking too deep in the snow.

At one time there were a seemingly endless variety of waxes for coating skis according to exact snow conditions, slopes, and skiing styles, but the development of synthetic resins and polymers for ski coatings has eliminated the use of wax by most skiers. There also have been changes in ski clothing. Synthetic fabrics that wick body moisture away from the body have also improved warmth and comfort on the slopes.