Chemical compounds

Aluminum oxide

Aluminum oxide exists in several different crystallographic forms, of which corundum is most common. Corundum is characterized by a high specific gravity (4.0), a high melting point (about 2,050 °C, or 3,700 °F), great insolubility, and hardness.

Aluminum oxide is the major ingredient in the commercial chemicals known as aluminas. Of the pure, inorganic chemicals, aluminas are among the largest volume produced in the world today. Rubies and sapphires are crystalline, nearly pure varieties of alumina, coloured by small amounts of impurities. Synthetic rubies and sapphires are made commercially by fusing a mixture of high-purity aluminum oxide with colouring agents in an oxyhydrogen blowpipe flame. Most are cut and drilled to form tiny “jewel” bearings in watches and various precision measuring instruments.

Activated alumina is a porous form of aluminum oxide from which much of the chemically combined water has been driven off at temperatures low enough to avoid sintering. It is chemically inert to most gases, nontoxic, and will not soften, swell, or disintegrate in water. It has the ability to adsorb and hold moisture without change in form or properties, and it has high resistance to shock and abrasion. Activated alumina is used in oil, chemical, and petrochemical industries as a dehydration agent and purifier in the manufacture of gasoline, petrochemicals, natural gas, and hydrogen peroxide.

Calcined alumina is aluminum oxide that has been heated at temperatures in excess of 1,050 °C (1,900 °F) to drive off nearly all chemically combined water. In this form, alumina has great chemical purity, extreme hardness (9 on the Mohs hardness scale, on which diamond is 10), high density, and a high melting point (slightly above 2,050 °C [3,700 °F]). It possesses good thermal conductivity, heat and shock resistance, and high electrical resistivity at elevated temperatures. This combination of properties makes calcined alumina useful in abrasives, glass, porcelains, spark plugs, and electrical insulators, but the greatest quantity of calcined alumina is used to obtain aluminum.

Tabular alumina is aluminum oxide that has been heated to temperatures above 1,650 °C (3,000 °F). Composed of tabletlike crystals, it has high heat capacity and thermal conductivity as well as exceptional strength and volume stability at high temperatures. For these reasons, a major use of tabular alumina is in the production of high-quality refractories, the materials used for lining industrial furnaces. High-alumina refractories are used in the metal and glass industries in boiler installations, in large furnaces and kilns for smelting metals and firing glass, pottery and porcelain, and in the manufacture of building bricks.

Most refractories are produced in the form of brick, bonded and fired in furnaces. Some castable refractories are made in the form of mortars, usually tabular alumina with calcium aluminate cement as a binder. These mortars, called grog, are sprayed under pressure to form the linings of the steel industry’s electric and basic oxygen furnaces, ladles, and coke ovens and for steam boilers, rotary kilns, and many other high-temperature applications.

Fused aluminas are used in special refractories for the glass industry. Fused alumina is calcined alumina that is melted in electric-arc furnaces, cooled, crushed, and recast into desired shapes. In another application, industrial processes requiring hot gases use a unique heat-transfer device called a pebble heater. Gases to be heated are passed through a bed of tabular alumina balls that have been heated to extreme temperatures. In still another application, an aluminous insulating material is formed by melting alumina and silica in an electric furnace and subjecting the molten mixture to high-velocity gases to produce fine white fibres.

Other compounds

The hydrous forms of alumina, called aluminum hydroxide, may contain either one or three molecules of water. Each may exist in two different crystalline phases, known as alpha and beta. In both forms, the alpha variety is more common. The alpha trihydroxide (gibbsite) and alpha oxide hydroxide (boehmite) occur in bauxite.

Aluminum trihydroxide is used extensively in the production of aluminum chemicals, such as aluminum sulfide, sodium aluminate, aluminum fluoride, and aluminum chloride hexahydrate. It is a raw material in the manufacture of petroleum catalysts, plastic and rubber goods, paper, glass and vitreous enamel, adhesives, varnishes, and toothpastes.

Aluminum sulfate is employed in water purification. Aluminum chloride in various forms is used as a catalyst in organic chemistry and in the cosmetic industry as a deodorant. Aluminum fluoride is used widely in the production of aluminum.