The granulated slag made by the rapid chilling of suitable molten slags from blast furnaces forms the basis of another group of constructional cements. A mixture of portland cement and granulated slag, containing up to 65 percent slag, is known in the English-speaking countries as portland blast-furnace (slag) cement. The German Eisenportlandzement and Hochofenzement contain up to 40 and 85 percent slag, respectively. Mixtures in other proportions are found in French-speaking countries under such names as ciment portland de fer, ciment métallurgique mixte, ciment de haut fourneau, and ciment de liatier au clinker. Properties of these slag cements are broadly similar to those of portland cement, but they have a lower lime content and a higher silica and alumina content. Those with the higher slag content have an increased resistance to chemical attack.

Another type of slag-containing cement is a supersulfated cement consisting of granulated slag mixed with 10 to 15 percent hard-burned gypsum or anhydrite (natural anhydrous calcium sulfate) and a few percent of portland cement. The strength properties of supersulfated cement are similar to those of portland cement, but it has an increased resistance to many forms of chemical attack. Pozzolanic cements are mixtures of portland cement and a pozzolanic material that may be either natural or artificial. The natural pozzolanas are mainly materials of volcanic origin but include some diatomaceous earths. Artificial materials include fly ash, burned clays, and shales. Pozzolanas are materials that, though not cementitious in themselves, contain silica (and alumina) in a reactive form able to combine with lime in the presence of water to form compounds with cementitious properties. Mixtures of lime and pozzolana still find some application but largely have been superseded by the modern pozzolanic cement. Hydration of the portland cement fraction releases the lime required to combine with the pozzolana.

High-alumina cement

High-alumina cement is a rapid-hardening cement made by fusing at 1,500 to 1,600 °C (2,730 to 2,910 °F) a mixture of bauxite and limestone in a reverberatory or electric furnace or in a rotary kiln. It also can be made by sintering at about 1,250 °C (2,280 °F). Suitable bauxites contain 50 to 60 percent alumina, up to 25 percent iron oxide, not more than 5 percent silica, and 10 to 30 percent water of hydration. The limestone must contain only small amounts of silica and magnesia. The cement contains 35 to 40 percent lime, 40 to 50 percent alumina, up to 15 percent iron oxides, and preferably not more than about 6 percent silica. The principal cementing compound is calcium aluminate (CaO · Al₂O₃).

High-alumina cement gains a high proportion of its ultimate strength within 24 hours and has a high resistance to chemical attack. It also can be used in refractory linings for furnaces. A white form of the cement, containing minimal proportions of iron oxide and silica, has outstanding refractory properties.

Expanding and nonshrinking cements

Expanding and nonshrinking cements expand slightly on hydration, thus offsetting the small contraction that occurs when fresh concrete dries for the first time. Expanding cements were first produced in France about 1945. The American type is a mixture of portland cement and an expansive agent made by clinkering a mix of chalk, bauxite, and gypsum.

Gypsum plasters

Gypsum plasters are used for plastering, the manufacture of plaster boards and slabs, and in one form of floor-surfacing material. These gypsum cements are mainly produced by heating natural gypsum (calcium sulfate dihydrate, CaSO₄ · 2H₂O) and dehydrating it to give calcium sulfate hemihydrate (CaSO₄ · 1/2H₂O) or anhydrous (water-free) calcium sulfate. Gypsum and anhydrite obtained as by-products in chemical manufacture also are used as raw materials.

The hemihydrate, known as plaster of Paris, sets within a few minutes on mixing with water; for building purposes a retarding agent, normally keratin, a protein, is added. The anhydrous calcium sulfate plasters are slower-setting, and often another sulfate salt is added in small amounts as an accelerator. Flooring plaster, originally known by its German title of Estrich Gips, is of the anhydrous type.