- Key People:
- Daniel Cowan Jackling
- Alexander Agassiz
- Meyer Guggenheim
- Related Topics:
- copper
- materials processing
Principal forms in which copper ores are found include native copper, porphyry copper, massive deposits, and mixed ores. Native copper is simply the metal found unadulterated in nature. Occasionally copper is still found in its native form, but more frequently it is mixed with other minerals, some of which may have value themselves. The amount of copper in an ore can vary from 0.4 percent to more than 12 percent. Porphyry copper deposits, in which the copper materials are more or less uniformly scattered throughout the rock, account for the greatest tonnage of metal in the producing areas of the world. The copper minerals in the upper portions of such deposits are in general oxides (copper chemically combined with oxygen), those in the lower levels sulfides (copper with sulfur). The host rock is porphyry, schist, or other rock. Massive deposits are of higher metal content but of more limited extent; they may be oxidized in the upper portion with sulfides lower down. In mixed ores, nickel, zinc, or lead can accompany the copper; when such ore is mined, these other metals also are refined and sold as by-products.
The table shows the ore minerals of copper and their compositions.
| copper (percent)* | |
|---|---|
| Native copper ore | |
| *Approximate. | |
| native copper | 99.9 |
| Sulfide ores | |
| chalcocite | 79.9 |
| covellite | 66.5 |
| chalcopyrite | 34.6 |
| bornite | 63.3 |
| enargite | 48.4 |
| tetrahedrite | 34.8 |
| Oxide ores | |
| cuprite | 88.8 |
| tenorite | 79.9 |
| malachite | 57.5 |
| azurite | 55.3 |
| chalcanthite | 25.5 |
| brochantite | 56.2 |
| chrysocolla | 33.9 |
Although commercial deposits of copper ores occur in almost every continent, 70 percent of the world’s known reserves are found in seven countries: Chile, the United States, Russia, Congo (Kinshasa), Peru, Zambia, and Mexico. The greatest known reserve of copper ore in one body is the deposit at El Teniente mine in Chile. Many lesser deposits are being exploited, such as those in Canada, China, Australia, and Europe.
Mining
For lower-grade deposits located near the surface, the open-pit method is the most practical for the mining of large tonnages of material. Large track-mounted drills prepare the ore for blasting, and the broken ore is hauled to the ore-dressing plant by truck (at up to 150 tons per load) or conveyor. In underground mining, vertical shafts are sunk well over 1,000 metres (3,300 feet) below the surface, and tunnels are extended to the ore body. The ore, broken by drilling and blasting, is hoisted through the shaft and conveyed to the processing plant. In some cases, primary crushing takes place underground; in others, a ramp and trucks carry ore to the surface.
Extraction and refining
The extraction of copper from ore is normally carried out in three major steps. The first step, mineral processing, is to liberate the copper minerals and remove waste constituents—such as alumina, limestone, pyrite, and silica—so that the copper minerals and other nonferrous minerals of value are concentrated into a product containing between 20 and 30 percent copper. The second step, involving either smelting or leaching, removes a large proportion of impurity elements—in particular iron and, in the case of sulfide ores, sulfur. The final step, refining, removes the last traces of the impurity elements and produces a copper product of 99.99 percent purity.
Mineral processing
In the ore-dressing plant, the material received from the mine is crushed in several stages and finely ground to a size which ensures that copper minerals are liberated from the waste materials, or gangue. In cases where the next step is leaching (most frequently in the case of oxide ores), complete liberation of the copper minerals is not always necessary; the ore needs to be crushed and ground only to the extent required to expose the surface of the minerals to the leaching agent. For sulfide ores, on the other hand, selective flotation normally follows the crushing and grinding stage and requires an optimal degree of liberation.
In the flotation process, the finely ground ore, mixed with water and special reagents, is agitated by mechanical and pneumatic devices. These produce air bubbles in the ore-water mixture, or slurry. The reagents provide an attraction between the surface of the copper minerals and the air bubbles. As the bubbles rise to the surface, they carry the copper minerals with them, leaving gangue minerals in the cell to be discarded as tailings. Collection of the froth from the surface of the flotation cell yields a copper concentrate. To increase the recovery of copper and reduce losses, the tailings are frequently reground and passed through a second flotation, the concentrate from which is combined with the initial production. The flotation concentrate is then dewatered and filtered to produce a filter cake that is sent to a copper smelter.