Other industrial applications

Explosive rivets

Blind rivets are needed when space limitations make conventional rivets impractical. One type of these is explosive; it has a hollow space in the shank containing a small charge of heat-sensitive chemicals. When a suitable amount of heat is applied to the head, an explosion takes place and expands the rivet shank tightly into the hole. The shank is normally open but can be sealed to eliminate noise and the ejection of metal fragments. Most explosive rivets are aluminum, but they can be obtained in stainless steel and certain other metals. Their use is mainly in aircraft.

Explosive bonding

Explosives are sometimes used to bond various metals to each other. For example, when silver was removed from United States coinage, much of the so-called sandwich metal that replaced it was obtained by the explosive bonding of large slabs, which were then rolled down to the required thickness. These slabs are placed parallel to each other and approximately 6.4 millimetres (0.25 inch) apart. An explosive developed especially for the purpose is placed on the top slab, and its detonation slams the slabs together with such force that they become welded. One especially valuable feature of explosion cladding is that it can frequently be applied to metallurgically incompatible metals, such as aluminum and steel or titanium and steel.

Finally, the very fine industrial-type diamonds used for grinding and polishing are produced by the carefully controlled action of explosives on carbon.