The metal and its alloys
More than 90 percent of the manganese produced goes into metallurgical applications, the pure metal being used in copper and aluminum alloys and ferromanganese and silicomanganese employed in steel and cast iron.
Steel
Most manganese is consumed as high-carbon ferromanganese for addition to carbon steels. In steels of lower carbon content, the medium- and low-carbon ferroalloy and even electrolytic manganese are employed.
As a desulfurizer, manganese forms stable, high-melting sulfide particles, thereby removing sulfur from the crystalline grain boundaries of the metal, where it can cause “hot shortness” (the inability to stand up to hot working). As a deoxidizer, silicomanganese is more effective than either silicon or manganese alone, since the simultaneous reaction of the two elements with oxygen produces a manganous silicate, which is low-melting and readily separates from the steel.
Most important, as an alloying agent, manganese improves strength, hardness, hardenability, and abrasion resistance. For example, Hadfield steel, containing 10 to 14 percent manganese, is a wear-resistant steel noted for its capacity to be work-hardened. In low-alloy steels, additions of up to 1.2 percent manganese, in combination with other elements, increases yield and tensile strength.
Nonferrous alloys
Powdered electrolytic manganese is briquetted with aluminum shot and added to aluminum in concentrations up to 2 percent. These alloys have greater strength, wear resistance, and corrosion resistance than can be provided by pure aluminum.
Aside from its standard alloying agents (aluminum, nickel, and zinc) copper can be improved by the addition of manganese. Manganese serves as a deoxidizer of the molten alloy, lowers the liquidus and solidus (thereby improving castability), and has a general strengthening effect. Special alloys, such as those with high electrical resistivity or high thermal expansion, can also be produced.
Chemical compounds
Manganous oxide is made by the reduction of manganous dioxide (MnO2) by carbon, hydrogen, carbon monoxide, or hydrocarbons at temperatures between 400 and 800 °C (750 and 1,450 °F). Manganese is readily assimilated by plants in this form, so that MnO is used as a fertilizer supplement in manganese-deficient regions. For use in fertilizer, MnO is obtained by the reduction of ores; high-purity MnO is used in specialty ceramics.
Although it occurs naturally in manganese ores, manganous dioxide, which finds its principal application as a depolarizer in dry-cell batteries, is usually produced synthetically. Manganese ore is reduced and then leached with sulfuric acid. The solution is purified, and manganous dioxide is obtained by electrolysis. It can also be obtained by the oxidation of manganese compounds of lower valance or by the thermal decomposition of manganese nitrate.
Potassium permanganate (KMnO4) finds wide use as an oxidizing agent. It is produced by alkaline fusion under oxidizing conditions, followed by electrolysis.
James H. Downing