particle accelerator
particle accelerator, any device that produces a beam of fast-moving, electrically charged atomic or subatomic particles. Physicists use accelerators in fundamental research on the structure of nuclei, the nature of nuclear forces, and the properties of nuclei not found in nature, as in the transuranium elements and other unstable elements. Accelerators are also used for radioisotope production, industrial radiography, radiation therapy, sterilization of biological materials, and a certain form of radiocarbon dating. The largest accelerators are used in research on the fundamental interactions of the elementary subatomic particles.
This article reviews the development of accelerators and delineates the various types and their distinguishing features. For specific information about the particles accelerated by these devices, see atom and subatomic particle.
Principles of particle acceleration
Particle accelerators exist in many shapes and sizes (even the ubiquitous television picture tube is in principle a particle accelerator), but the smallest accelerators share common elements with the larger devices. First, all accelerators must have a source that generates electrically charged particles—electrons in the case of the television tube and electrons, protons, and their antiparticles in the case of larger accelerators. All accelerators must have electric fields to accelerate the particles, and they must have magnetic fields to control the paths of the particles. Also, the particles must travel through a good vacuum—that is, in a container with as little residual air as possible, as in a television tube. Finally, all accelerators must have some means of detecting, counting, and measuring the particles after they have been accelerated through the vacuum.
Generating particles
Electrons and protons, the particles most commonly used in accelerators, are found in all materials, but for an accelerator the appropriate particles must be separated out. Electrons are usually produced in exactly the same way as in a television picture tube, in a device known as an electron “gun.” The gun contains a cathode (negative electrode) in a vacuum, which is heated so that electrons break away from the atoms in the cathode material. The emitted electrons, which are negatively charged, are attracted toward an anode (positive electrode), where they pass through a hole. The gun itself is in effect a simple accelerator, because the electrons move through an electric field, as described below. The voltage between the cathode and the anode in an electron gun is typically 50,000–150,000 volts, or 50–150 kilovolts (kV).
As with electrons, there are protons in all materials, but only the nuclei of hydrogen atoms consist of single protons, so hydrogen gas is the source of particles for proton accelerators. In this case the gas is ionized—the electrons and protons are separated in an electric field—and the protons escape through a hole. In large high-energy particle accelerators, protons are often produced initially in the form of negative hydrogen ions. These are hydrogen atoms with an extra electron, which are also formed when the gas, originally in the form of molecules of two atoms, is ionized. Negative hydrogen ions prove easier to handle in the initial stages of large accelerators. They are later passed through thin foils to strip off the electrons before the protons move to the final stage of acceleration.
Accelerating particles
The key feature of any particle accelerator is the accelerating electric field. The simplest example is a uniform static field between positive and negative electric potentials (voltages), much like the field that exists between the terminals of an electric battery. In such a field an electron, bearing a negative charge, feels a force that directs it toward the positive potential (akin to the positive terminal of the battery). This force accelerates the electron, and if there is nothing to impede the electron, its velocity and its energy will increase. Electrons moving toward a positive potential along a wire or even in air will collide with atoms and lose energy, but if the electrons pass through a vacuum, they will accelerate as they move toward the positive potential.
The difference in electric potential between the position where the electron begins moving through the field and the place where it leaves the field determines the energy that the electron acquires. The energy an electron gains in traveling through a potential difference of 1 volt is known as 1 electron volt (eV). This is a tiny amount of energy, equivalent to 1.6 × 10−19 joule. A flying mosquito has about a trillion times this energy. However, in a television tube, electrons are accelerated through more than 10,000 volts, giving them energies above 10,000 eV, or 10 kiloelectron volts (keV). Many particle accelerators reach much higher energies, measured in megaelectron volts (MeV, or million eV), gigaelectron volts (GeV, or billion eV), or teraelectron volts (TeV, or trillion eV).
Some of the earliest designs for particle accelerators, such as the voltage multiplier and the Van de Graaff generator, used constant electric fields created by potentials up to a million volts. It is not easy to work with such high voltages, however. A more-practical alternative is to make repeated use of weaker electric fields set up by lower voltages. This is the principle involved in two common categories of modern particle accelerators—linear accelerators (or linacs) and cyclic accelerators (principally the cyclotron and the synchrotron). In a linear accelerator the particles pass once through a sequence of accelerating fields, whereas in a cyclic machine they are guided on a circular path many times through the same relatively small electric fields. In both cases the final energy of the particles depends on the cumulative effect of the fields, so that many small “pushes” add together to give the combined effect of one big “push.”
The repetitive structure of a linear accelerator naturally suggests the use of alternating rather than constant voltages to create the electric fields. A positively charged particle accelerated toward a negative potential, for example, will receive a renewed push if the potential becomes positive as the particle passes by. In practice the voltages must change very rapidly. For example, at an energy of 1 MeV a proton is already traveling at very high speeds—46 percent of the speed of light—so that it covers a distance of about 1.4 metres (4.6 feet) in 0.01 microsecond. (One microsecond is a millionth of a second.) This implies that in a repeated structure several metres long, the electric fields must alternate—that is, change direction—at a frequency of at least 100 million cycles per second, or 100 megahertz (MHz). Both linear and cyclic accelerators generally accelerate particles by using the alternating electric fields present in electromagnetic waves, typically at frequencies from 100 to 3,000 MHz—that is, ranging from radiowaves to microwaves.
An electromagnetic wave is in effect a combination of oscillating electric and magnetic fields vibrating at right angles to each other. The key with a particle accelerator is to set up the wave so that, when the particles arrive, the electric field is in the direction needed to accelerate the particles. This can be done with a standing wave—a combination of waves moving in opposite directions in an enclosed space, rather like sound waves vibrating in an organ pipe. Alternatively, for very fast-moving electrons, which travel very close to the speed of light (in other words, close to the speed of the wave itself), a traveling wave can be used for acceleration.
An important effect that comes into play in acceleration in an alternating electric field is that of “phase stability.” In one cycle of its oscillation, an alternating field passes from zero through a maximum value to zero again and then falls to a minimum before rising back to zero. This means that the field passes twice through the value appropriate for acceleration—for example, during the rise and fall through the maximum. If a particle whose velocity is increasing arrives too soon as the field rises, it will not experience as high a field as it should and so will not receive as big a push. However, when it reaches the next region of accelerating fields, it will arrive late and so will receive a higher field—in other words, too big a push. The net effect will be phase stability—that is, the particle will be kept in phase with the field in each accelerating region. Another effect will be a grouping of the particles in time, so that they will form a train of bunches rather than a continuous beam of particles.
Guiding particles
Magnetic fields also play an important role in particle accelerators, as they can change the direction of charged particles. This means that they can be used to “bend” particle beams around a circular path so that they pass repeatedly through the same accelerating regions. In the simplest case a charged particle moving in a direction at right angles to the direction of a uniform magnetic field feels a force at right angles both to the particle’s direction and to the field. The effect of this force is to make the particle move on a circular path, perpendicular to the field, until it leaves the region of magnetic force or another force acts upon it. This effect comes into play in cyclic accelerators such as cyclotrons and synchrotrons. In the cyclotron a large magnet is used to provide a constant field in which the particles spiral outward as they are fed energy and thereby accelerate on each circuit. In a synchrotron, by contrast, the particles move around a ring of constant radius, while the field generated by electromagnets around the ring is increased as the particles accelerate. The magnets with this “bending” function are dipoles—magnets with two poles, north and south, built with a C-shaped profile so that the particle beam can pass between the two poles.
A second important function of electromagnets in particle accelerators is to focus the particle beams in order to keep them as narrow and intense as possible. The simplest form of focusing magnet is a quadrupole, a magnet built with four poles (two norths and two souths) arranged opposite each other. This arrangement pushes particles toward the centre in one direction but allows them to spread in the perpendicular direction. A quadrupole designed to focus a beam horizontally, therefore, will let the beam go out of focus vertically. In order to provide proper focusing, quadrupole magnets must be used in pairs, each member arranged to have the opposite effect. More-complex magnets with larger numbers of poles—sextupoles and octupoles—are also used for more-sophisticated focusing.
As the energy of the circulating particles increases, the strength of the magnetic field guiding them is increased, which thus keeps the particles on the same path. A “pulse” of particles is injected into the ring and accelerated to the desired energy before it is extracted and delivered to experiments. Extraction is usually achieved by “kicker” magnets, electromagnets that switch on just long enough to “kick” the particles out of the synchrotron ring and along a beam line. The fields in the dipole magnets are then ramped down, and the machine is ready to receive its next pulse of particles.
Colliding particles
Most of the particle accelerators used in medicine and industry produce a beam of particles for a specific purpose—for example, for radiation therapy or ion implantation. This means that the particles are used once and then discarded. For many years the same was true for accelerators used in particle physics research. However, in the 1970s rings were developed in which two beams of particles circulate in opposite directions and collide on each circuit of the machine. A major advantage of such machines is that when two beams collide head-on, the energy of the particles goes directly into the energy of the interactions between them. This contrasts with what happens when an energetic beam collides with material at rest: in this case much of the energy is lost in setting the target material in motion, in accord with the principle of conservation of momentum.
Some colliding-beam machines have been built with two rings that cross at two or more positions, with beams of the same kind circulating in opposite directions. More common yet have been particle-antiparticle colliders. An antiparticle has opposite electric charge to its related particle. For example, an antielectron (or positron) has positive charge, while the electron has negative charge. This means that an electric field that accelerates an electron will decelerate a positron moving in the same direction as the electron. But if the positron is traveling through the field in the opposite direction, it will feel an opposite force and will be accelerated. Similarly, an electron moving though a magnetic field will be bent in one direction—left, say—while a positron moving the same way will be bent in the opposite direction—to the right. If, however, the positron moves through the magnetic field in the opposite direction to the electron, its path will still bend to the right, but along the same curve taken by the leftward-bending electron. Taken together, these effects mean that an antielectron can travel around a synchrotron ring guided by the same magnets and accelerated by the same electric fields that affect an electron traveling the opposite way. Many of the highest-energy colliding-beam machines have been particle-antiparticle colliders, as only one accelerator ring is needed.
As is pointed out above, the beam in a synchrotron is not a continuous stream of particles but is clustered into “bunches.” A bunch may be a few centimetres long and a tenth of a millimetre across, and it may contain about 1012 particles—the actual numbers depending on the specific machine. However, this is not very dense; normal matter of similar dimensions contains about 1023 atoms. So when particle beams—or, more accurately, particle bunches—cross in a colliding-beam machine, there is only a small chance that two particles will interact. In practice the bunches can continue around the ring and intersect again. To enable this repeated beam crossing, the vacuum in the rings of colliding-beam machines must be particularly good so that the particles can circulate for many hours without being lost through collisions with residual air molecules. The rings are therefore also referred to as storage rings, as the particle beams are in effect stored within them for several hours.
Detecting particles
Most uses of the beams from particle accelerators require some way of detecting what happens when the particles strike a target or another particle beam traveling in the opposite direction. In a television picture tube, the electrons shot from the electron gun strike special phosphors on the inside surface of the screen, and these emit light, which thereby re-creates the televised images. With particle accelerators similarly specialized detectors respond to scattered particles, but these detectors are usually designed to create electrical signals that can be transformed into computer data and analyzed by computer programs. Only electrically charged particles create electrical signals as they move through a material—for example, by exciting or ionizing the atoms—and can be detected directly. Neutral particles, such as neutrons or photons, must be detected indirectly through the behaviour of charged particles that they themselves set in motion.
There are a great variety of particle detectors, many of which are most useful in specific circumstances. Some, such as the familiar Geiger counter, simply count particles, whereas others are used, for example, to record the tracks of charged particles or to measure the velocity of a particle or the amount of energy it carries. Modern detectors vary in size and technology from small charge-coupled devices (CCDs) to large gas-filled chambers threaded with wires that sense the ionized trails created by charged particles.
History
Most of the development of particle accelerators has been motivated by research into the properties of atomic nuclei and subatomic particles. Starting with British physicist Ernest Rutherford’s discovery in 1919 of a reaction between a nitrogen nucleus and an alpha particle, all research in nuclear physics until 1932 was performed with alpha particles released by the decay of naturally radioactive elements. Natural alpha particles have kinetic energies as high as 8 MeV, but Rutherford believed that, in order to observe the disintegration of heavier nuclei by alpha particles, it would be necessary to accelerate alpha particle ions artificially to even higher energies. At that time there seemed little hope of generating laboratory voltages sufficient to accelerate ions to the desired energies. However, a calculation made in 1928 by George Gamow (then at the University of Göttingen, Ger.) indicated that considerably less-energetic ions could be useful, and this stimulated attempts to build an accelerator that could provide a beam of particles suitable for nuclear research.
Other developments of that period demonstrated principles still employed in the design of particle accelerators. The first successful experiments with artificially accelerated ions were performed in England at the University of Cambridge by John Douglas Cockcroft and E.T.S. Walton in 1932. Using a voltage multiplier, they accelerated protons to energies as high as 710 keV and showed that these react with the lithium nucleus to produce two energetic alpha particles. By 1931, at Princeton University in New Jersey, Robert J. Van de Graaff had constructed the first belt-charged electrostatic high-voltage generator. Cockcroft-Walton-type voltage multipliers and Van de Graaff generators are still employed as power sources for accelerators.
The principle of the linear resonance accelerator was demonstrated by Rolf Wideröe in 1928. At the Rhenish-Westphalian Technical University in Aachen, Ger., Wideröe used alternating high voltage to accelerate ions of sodium and potassium to energies twice as high as those imparted by one application of the peak voltage. In 1931 in the United States, Ernest O. Lawrence and his assistant David H. Sloan, at the University of California, Berkeley, employed high-frequency fields to accelerate mercury ions to more than 1.2 MeV. This work augmented Wideröe’s achievement in accelerating heavy ions, but the ion beams were not useful in nuclear research.
The magnetic resonance accelerator, or cyclotron, was conceived by Lawrence as a modification of Wideröe’s linear resonance accelerator. Lawrence’s student M.S. Livingston demonstrated the principle of the cyclotron in 1931, producing 80-keV ions; in 1932 Lawrence and Livingston announced the acceleration of protons to more than 1 MeV. Later in the 1930s, cyclotron energies reached about 25 MeV and Van de Graaff generators about 4 MeV. In 1940 Donald W. Kerst, applying the results of careful orbit calculations to the design of magnets, constructed the first betatron, a magnetic-induction accelerator of electrons, at the University of Illinois.
Following World War II there was a rapid advance in the science of accelerating particles to high energies. Progress was initiated by Edwin Mattison McMillan at Berkeley and by Vladimir Iosifovich Veksler at Moscow. In 1945 both men independently described the principle of phase stability. This concept suggested a means of maintaining stable particle orbits in the cyclic accelerator and thus removed an apparent limitation on the energy of resonance accelerators for protons (see below Cyclotrons: Classical cyclotrons) and made possible the construction of magnetic resonance accelerators (called synchrotrons) for electrons. Phase focusing, the implementation of the principle of phase stability, was promptly demonstrated by the construction of a small synchrocyclotron at the University of California and an electron synchrotron in England. The first proton linear resonance accelerator was constructed soon thereafter. The large proton synchrotrons that have been built since then all depend on this principle.
In 1947 William W. Hansen, at Stanford University in California, constructed the first traveling-wave linear accelerator of electrons, exploiting microwave technology that had been developed for radar during World War II.
The progress in research made possible by raising the energies of protons led to the building of successively larger accelerators; the trend was ended only by the cost of fabricating the huge magnet rings required—the largest weighs approximately 40,000 tons. A means of increasing the energy without increasing the scale of the machines was provided by a demonstration in 1952 by Livingston, Ernest D. Courant, and H.S. Snyder of the technique of alternating-gradient focusing (sometimes called strong focusing). Synchrotrons incorporating this principle needed magnets only 1/100 the size that would be required otherwise. All recently constructed synchrotrons make use of alternating-gradient focusing.
In 1956 Kerst realized that, if two sets of particles could be maintained in intersecting orbits, it should be possible to observe interactions in which one particle collided with another moving in the opposite direction. Application of this idea requires the accumulation of accelerated particles in loops called storage rings (see below Colliding-beam storage rings). The highest reaction energies now obtainable have been produced by the use of this technique.