- Related Topics:
- mobile telephone
- telephone box
- switch hook
- anti-sidetone circuit
- ringer
- On the Web:
- National Museums Scotland - Did Alexander Graham Bell invent the telephone? (Oct. 29, 2024)
In order to understand the many concepts represented in the public switched telephone network (PSTN), it is helpful to review the processes that take place in the making of a single call on a traditional wired telephone. To make a call, a telephone subscriber begins by taking the telephone “off-hook”—in the process, signaling the local central office that service is requested. The central office, which has been monitoring the telephone line continuously (a process known as attending), responds with a dial tone. Upon receiving the dial tone, the customer enters the called party’s telephone number. The central office stores the entered number, translates the number into an equipment location and a path to that location, and tests whether the called party’s line is already in use (or “busy”). The called party’s number may lie in the same central office (in which case the call is designated intraoffice), or it may lie in another central office (requiring an interoffice call). If the call is intraoffice, the central office switch will handle the entire call process. If the call is interoffice, it will be directed either to a nearby central office or to a distant central office via a long-distance network. In the case of interoffice calls, a separate signaling network is employed to coordinate the call progression through a multitude of switches and telephone trunks. Assuming, however, that the call is an intraoffice call, if the called party’s line is busy and does not have call waiting (in which the current call can be suspended), the telephone switch will return a busy signal until the calling party returns to the “on-hook” condition. If the called party’s line is not busy or does have call waiting, it will be alerted, or “rung.” At the same time that the line is rung, an audible signal will be returned to the calling party to indicate that ringing is taking place. If the called party answers by going off-hook, ringing will be discontinued and a voice path will be established through the switching system to both the calling and called parties. The voice path is maintained until either party goes back on-hook. At that moment the voice path is disconnected, and call charging is recorded.
From the example described above, it is evident that telephone systems consist of four major components:
- Switching, between telephone sets and between trunks, as required.
- Signaling, between the telephone sets and the central offices as well as between central offices when needed.
- Transmission, between the central switching office and subscribers’ telephone sets and also between central offices.
Each of these major components of a telephone system is discussed in turn in this section.
Switching
Switching systems
Manual switching
From the earliest days of the telephone, it was observed that it was more practical to connect different telephone instruments by running wires from each instrument to a central switching point, or telephone exchange, than it was to run wires between all the instruments. In 1878 the first telephone exchange was installed in New Haven, Connecticut, permitting up to 21 customers to reach one another by means of a manually operated central switchboard. The manual switchboard was quickly extended from 21 lines to hundreds of lines. Each line was terminated on the switchboard in a socket (called a jack), and a number of short, flexible circuits (called cords) with a plug on both ends of each cord were also provided. Two lines could thus be interconnected by inserting the two ends of a cord in the appropriate jacks.
Electromechanical switching
The idea of automatic switching appeared as early as 1879, and the first fully automatic switch to achieve commercial success was invented in 1889 by Almon B. Strowger, the owner of an undertaking business in Kansas City, Missouri. The Strowger switch consisted of essentially two parts: an array of 100 terminals, called the bank, that were arranged 10 rows high and 10 columns wide in a cylindrical arc; and a movable switch, called the brush, which was moved up and down the cylinder by one ratchet mechanism and rotated around the arc by another, so that it could be brought to the position of any of the 100 terminals. The ratcheting action on the brush gave Strowger’s invention the common name step-by-step switch. The stepping movement was controlled directly by pulses from the telephone instrument. In the original systems, the caller generated the pulses by rapidly pushing a button switch on the instrument. Later, in 1896, Strowger’s associates devised a rotary dial for generating the necessary pulses. (The rotary dialing system is described below in Rotary dialing.)
In 1913 J.N. Reynolds, an engineer with Western Electric (at that time the manufacturing division of AT&T), patented a new type of telephone switch that became known as the crossbar switch. The crossbar switch was a grid composed of five horizontal selecting bars and 20 vertical hold bars. Input lines were connected to the hold bars and output lines to the selecting bars.
The five selecting bars could be rotated either upward or downward to make connections with the hold bars, thus effectively providing the switch with 10 horizontal rows. With the appropriate movement of the hold and selecting bars, any column could be connected to any row, and up to 10 simultaneous connections could be provided by the switch. The first crossbar system was demonstrated by Televerket, the Swedish government-owned telephone company, in 1919. The first commercially successful system, however, was the AT&T No. 1 crossbar system, first installed in Brooklyn, N.Y., in 1938. A series of improved versions followed the No. 1 crossbar system, the most notable being the No. 5 system. First deployed in 1948, the No. 5 crossbar system became the workhorse of the Bell System and by 1978 accounted for the largest number of installed lines throughout the world. Originally designed to serve 27,000 lines, it was later upgraded to handle 35,000 voice circuits. Further revisions of the AT&T crossbar systems continued until 1974, by which time new switching systems had shifted from electromechanical to electronic technology.