Major types of thermionic converters
- Also called:
- thermionic generator, thermionic power generator, or thermoelectric engine
Vacuum converters
The available power and the efficiency of a thermionic converter can be severely limited by buildup of space charge between the electrodes. The vacuum type of thermionic converter uses a very small gap between its emitter and collector electrodes—typically 0.025 to 0.038 mm (0.001 to 0.0015 inch)—in order to minimize the effects of this electronic space charge. At a temperature of 1,100 K (about 800 °C, or 1,500 °F) the electric power converted is 0.1 to 1 watt per square centimetre of emitter surface. Converters with such small spacings are difficult to manufacture, though. As a result, the vacuum converter has had only limited practical application.
Gas-filled or plasma converters
These devices are designed so that positively charged ions are continuously generated and mixed with negatively charged electrons in the space between the emitter and the collector to provide a plasma with a relatively neutral space charge. Because of this, a liberated electron encounters little electrostatic resistance force in passing from the emitter to the collector. Alkali metals are used to produce a readily ionizable vapour. Cesium is used in the most efficient converters because of its low ionization potential (3.89 electron volts). Potassium, rubidium, and various other elements may also be used. The vapour pressure is normally on the order of 100 pascals. Contact ionization occurs when the ionization potential is less than the work function of the emitter material. Tungsten is a suitable emitter material because of its ability to operate at relatively high temperatures.
Auxiliary discharge converters
In an auxiliary discharge converter, an inert gas is used between the electrodes (e.g., neon, argon, or xenon). Positive ions are produced by applying voltage to a third electrode. The principal advantage of the auxiliary discharge converter—so called because of its spark-plug-type configuration—is that it can operate at a relatively low temperature (e.g., 1,500 K, about 1,200 °C or 2,200 °F), allowing a range of conventional fossil fuels to be used as the heat source. Some experimental systems have been built and tested.
Leighton E. Sissom G. Ralph Strohl