The management of research and development activities
- Abbreviation:
- R and D
- Or:
- R & D
Most research and development projects are examples of a project, or one-shot, production system. Here, as opposed to the ongoing activity found in batch or continuous systems, resources are brought together for a period of time, focused on a particular task, such as the development of a new product, and then disbanded and reassigned. The management of such projects requires a special type of organization to administer project resources in an effective manner and maintain clear accountability for the progress of the project. This organization also must avoid the inherent conflict of authority between project managers and managers in the marketing, production, and other departments and coordinate members of R and D teams who are assigned to more than one project and must divide their time among conflicting demands. The management of the whole process is a key to R and D and commercial success.
In industries where continuous innovation and R and D are critical, such as electronics, drugs, robotics, and aerospace, the R and D department usually operates on a corporate level comparable to production, finance, and marketing. A relatively small management group usually sets priorities and budgets and supervises R and D activities. Most research and development personnel are assigned to project activity and report to individual project managers who have considerable autonomy and authority over the people and resources required to complete the project.
The basic purpose of the R and D laboratories of private industry is to provide new products for manufacture and new or improved processes for producing them. One difficulty facing those who plan these projects is the relationship between development costs and predicted sales. In the early stages of development, project expenditures are typically low. They increase to a maximum and decline slowly, disappearing as early production difficulties are overcome and the product settles into a market niche.
Similarly, production rises slowly at first, then more rapidly, and finally reaches a plateau. After a time, production starts to fall, sales declining gradually as the product becomes obsolete or abruptly as it is replaced by a new one.
At any particular time, a company may have a number of products at different stages of the cycle. Project managers must ensure that the total development effort required is neither greater nor significantly less than available human and financial resources. Production managers must be satisfied that the eventual demands upon their capacity and resources will be sufficient to keep them fully loaded but not overloaded.
To maintain such a balanced condition, a steady flow of new R and D proposals is required. Each must be studied by technical, commercial, financial, and manufacturing experts. Planning within an R and D organization, then, consists of selecting for development new products and processes that promise to employ the resources available in the most profitable manner. R and D managers have a key part to play in proposing projects as well as in carrying them out.
At each stage of the research and development process, there are numerous technical, financial, and managerial issues that have to be resolved and coordinated with many groups. For example, during the late 1970s and early 1980s several computer and electronics companies in the United States and Europe established major research programs aimed at developing bubble memory devices for large computers. As bubble memories were proved to be technically feasible (i.e., work reliably under normal operating conditions), attention shifted to developing processes to manufacture the memory units at competitive costs. This part of the job proved the most difficult, and by the mid-1980s bubble memories had captured only a minuscule share of the total market for memory devices.
The difficulties in developing the design and production specifications needed to produce low-cost bubble memory units severely tested the mettle of the R and D organizations in several companies in the United States, Japan, and Europe. Each company had to balance the expense of continued R and D investment against the consequences of withdrawing from bubble memory research. Making a decision like this requires a keen sense of the market, a knowledge of the technical issues at hand, and, most importantly, an understanding of the company’s priorities and alternatives for R and D funds.
Project management and planning techniques
Value engineering and cost-benefit analysis
In the areas in which technology advances fastest, new products and new materials are required in a constant flow, but there are many industries in which the rate of change is gentle. Although ships, automobiles, telephones, and television receivers have changed over the last quarter of a century, the changes have not been spectacular. Nevertheless, a manufacturer who used methods even 10 years old could not survive in these businesses. The task of R and D laboratories working in these areas is to keep every facet of the production process under review and to maintain a steady stream of improvements. Although each in itself may be trivial, the total effect is many times as large as the margin between success and failure in a competitive situation.
These efforts to improve existing products and processes have been formalized under the titles of value engineering and cost-benefit analysis.
In value engineering every complete product and every component have their primary function described by an action verb and a noun. For example, an automobile’s dynamo, or generator, generates electricity. The engineer considers all other possible methods of generation, calculates a cost for each, and compares the lowest figure with that for the existing dynamo. If the ratio is reasonably close to unity, the dynamo can be accepted as an efficient component. If not, the engineer examines the alternatives in more detail. The same treatment is applied in turn to each of the parts out of which the chosen component is built, until it is clear that the best possible value is being obtained.
Cost-benefit analysis approaches the same fundamental problem from a different angle. It takes each part of a product or process and completely defines its function and the basis for measuring its benefits or effectiveness. Then the costs of obtaining each part are reviewed, taking full account of purchased material, labour, investment cost, downtime, and other factors. This focuses attention upon the most expensive items and makes it possible to apply the principal effort in seeking economies at the points of maximum reward. In the effort to improve a product or process, care must be taken to evaluate alternatives on the same “cost” and “benefit” bases so that existing approaches do not enjoy a special advantage just because they are familiar.
These two processes are unending. Every new material, new manufacturing technique, or new way of carrying out an operation gives the engineer a chance to improve his product, and it is from these continuing improvements that the high degree of economy and reliability of modern equipment derives.
Thomas S. McLeod William K. Holstein