The terms glass and window glass are often used interchangeably in everyday language, so familiar is this ancient architectural application of amorphous solids. Not only are oxide glasses, such as those characterized in the table, excellent for letting light in, they are also good for keeping cold out, because (as mentioned above) they are efficient thermal insulators.

The second application in the table of technological applications of amorphous solids represents a modern development that carries the property of optical transparency to a phenomenal level. The transparency of the extraordinarily pure glasses that have been developed for fibre-optic telecommunications is so great that, at certain wavelengths, light can pass through 1 kilometre (0.6 mile) of glass and still retain 95 percent of its original intensity.

Glass fibres (transmitting optical signals) are now doing what copper wires (transmitting electrical signals) once did and are doing it more efficiently: carrying telephone messages around the planet. How this is done is schematically indicated in Figure 8. Digital electrical pulses produced by encoding of the voice-driven electrical signal are converted into light pulses by a semiconductor laser coupled to one end of the optical fibre. The signal is then transmitted over a long length of fibre as a stream of light pulses. At the far end it is converted back into electrical pulses and then into sound.

The glass fibre is somewhat thinner than a human hair. The simplest type, as sketched in the upper left of the figure, has a central core of ultratransparent glass surrounded by a coaxial cladding of a glass having a lower refractive index, n. This ensures that light rays propagating within the core, at small angles relative to the fibre axis, do not leak out but instead are 100 percent reflected at the core-cladding interface by the optical effect known as total internal reflection.

The great advantage provided by the substitution of light-transmitting fibres of ultratransparent oxide glass for electricity-transmitting wires of crystalline copper is that a single optical fibre can carry many more simultaneous conversations than can a thick cable packed with copper wires. This is the case because light waves oscillate at enormously high frequencies (about 2 × 10¹⁴ cycles per second for the infrared light generally used for fibre-optic telecommunications). This allows the light-wave signal carrier to be modulated at very high frequencies and to transmit a high volume of information traffic. Fibre-optic communications have greatly expanded the information-transmitting capacity of the world’s telecommunications networks.

Polymeric structural materials

Polystyrene, the organic polymer listed in the table of technological applications of amorphous solids, is a prototypical example of a polymeric glass. These glasses, whose atomic-scale structure has been discussed in connection with Figure 7B, make up a broad class of lightweight structural materials important in the automotive, aerospace, and construction industries. These materials are also ubiquitous in everyday experience as plastic molded objects. The quantity of polymer materials produced each year, measured in terms of volume, exceeds the quantity of steel produced.

Polystyrene is among the most important of the thermoplastic materials that, when heated (to the vicinity of the glass transition temperature), soften and flow controllably, enabling them to be processed at high speeds and on a large scale in the manufacture of molded products. The chemical formula of a polystyrene chain may be written as (CH₂CHC₆H₅)_N. The building block (inside the parentheses) consists of two backbone carbon atoms to which three hydrogen atoms and one phenyl (C₆H₅) ring are bonded as side groups. The polymerization index N reaches values above 10⁵. Polystyrene is a purely hydrocarbon polymer (i.e., it contains only hydrogen and carbon); most organic polymers contain additional chemical components.

Amorphous semiconductors in electronics

Amorphous semiconductors, in the form of thin films prepared by methods such as that shown in Figure 4D, are important in applications requiring large areas of electronically active material. The first electronic application of amorphous semiconductors to occur on a large scale was in xerography (or electrostatic imaging), the process that provides the basis of plain-paper copiers. Amorphous selenium (Se) and, later, amorphous arsenic selenide (As₂Se₃) were used to form the thin-film, large-area photoconducting element that lies at the heart of the xerographic process. The photoconductor, which is an electrical insulator in the absence of light but which conducts electricity when illuminated, is exposed to an image of the document to be copied. Throughout the world—in offices, libraries, schools, and so forth—the xerographic process makes more than five billion copies every day. This process is also widely used in laser printers, in which the photoconductor is exposed to a digitally controlled on-and-off laser beam that is raster scanned (like the electron beam in a television tube) over the photoconductor surface.

Although still in use, selenium and arsenic selenide have been joined by other amorphous materials in this important technology. Polymeric organic glasses, in the form of thin films, are now used in multilayer photoconductor configurations in which the light is absorbed in one layer and electrical charge is transported through an adjacent layer. Both layers are formed of amorphous polymer films, and these photoreceptors can be made in the form of flexible belts.

Amorphous silicon thin films are used in solar cells that power handheld calculators. This important amorphous semiconductor is also used as the image sensor in facsimile (“fax”) machines, and it serves as the photoreceptor in some xerographic copiers. All these applications exploit the ability of amorphous silicon to be vapour-deposited in the form of large-area thin films. As shown in the table of technological applications of amorphous solids, the practical form of this amorphous semiconductor is not pure silicon but a silicon-hydrogen alloy containing 10 percent hydrogen. The key role played by hydrogen, in what is now called hydrogenated amorphous silicon, emerged in a scientific puzzle that took years to solve. Stated briefly, hydrogen eliminates the electronic defects that are intrinsic to pure amorphous silicon.

Hydrogenated amorphous silicon also is used in high-resolution flat-panel displays for computer monitors and for television screens. In such applications the large-area amorphous-semiconductor thin film is etched into an array of many tiny units, each of which forms the active element of a transistor that electronically turns on or off a small pixel (picture element) of a liquid-crystal display.

Magnetic glasses

The last entry in the table of technological applications of amorphous solids is an application of metallic glasses having magnetic properties. These are typically iron-rich amorphous solids with compositions such as Fe_0.8B_0.2 iron-boron and Fe_0.8B_0.1Si_0.1 iron-boron-silicon. They are readily formed as long metallic glass ribbons by melt spinning or as wide sheets by planar flow casting. Ferromagnetic glasses are mechanically hard materials, but they are magnetically soft, meaning that they are easily magnetized by small magnetic fields. Also, because of their disordered atomic-scale structure, they have higher electrical resistance than conventional (crystalline) magnetic materials. The three attributes of ease of manufacture, magnetic softness, and high electrical resistance make magnetic glasses extremely suitable for use in the magnetic cores of electrical power transformers. High electrical resistance (which arises here as a direct consequence of amorphicity) is a crucial property in this application, because it minimizes unwanted electrical eddy currents and cuts down on power losses. For these reasons, sheets of iron-based magnetic glasses are used as transformer-core laminations in electrical power applications.

Thin films of magnetic glass are finding use in many other applications. These include magnetic recording media for audio and video digital recording, as well as recording heads used with magnetic disks.