Principal compounds

Copper forms compounds in the oxidation states +1 and +2 in its normal chemistry, although under special circumstances some compounds of trivalent copper can be prepared. It has been shown that trivalent copper survives no more than a few seconds in an aqueous solution.

Copper(I) (cuprous) compounds are all diamagnetic and, with few exceptions, colourless. Among the important industrial compounds of copper(I) are cuprous oxide (Cu₂O), cuprous chloride (Cu₂Cl₂), and cuprous sulfide (Cu₂S). Cuprous oxide is a red or reddish brown crystal or powder that occurs in nature as the mineral cuprite. It is produced on a large scale by reduction of mixed copper oxide ores with copper metal or by electrolysis of an aqueous solution of sodium chloride using copper electrodes. The pure compound is insoluble in water but soluble in hydrochloric acid or ammonia. Cuprous oxide is used principally as a red pigment for antifouling paints, glasses, porcelain glazes, and ceramics and as a seed or crop fungicide.

Cuprous chloride is a whitish to grayish solid that occurs as the mineral nantokite. It is usually prepared by reduction of copper(II) chloride with metallic copper. The pure compound is stable in dry air. Moist air converts it to a greenish oxygenated compound, and upon exposure to light it is transformed into copper(II) chloride. It is insoluble in water but dissolves in concentrated hydrochloric acid or in ammonia because of the formation of complex ions. Cuprous chloride is used as a catalyst in a number of organic reactions, notably the synthesis of acrylonitrile from acetylene and hydrogen cyanide; as a decolourizing and desulfurizing agent for petroleum products; as a denitrating agent for cellulose; and as a condensing agent for soaps, fats, and oils.

Cuprous sulfide occurs in the form of black powder or lumps and is found as the mineral chalcocite. Large quantities of the compound are obtained by heating cupric sulfide (CuS) in a stream of hydrogen. Cuprous sulfide is insoluble in water but soluble in ammonium hydroxide and nitric acid. Its applications include use in solar cells, luminous paints, electrodes, and certain varieties of solid lubricants.

Copper(II) compounds of commercial value include cupric oxide (CuO), cupric chloride (CuCl₂), and cupric sulfate (CuSO₄). Cupric oxide is a black powder that occurs as the minerals tenorite and paramelaconite. Large amounts are produced by roasting mixed copper oxide ores in a furnace at a temperature below 1,030 °C (1,900 °F). The pure compound can be dissolved in acids and alkali cyanides. Cupric oxide is employed as a pigment (blue to green) for glasses, porcelain glazes, and artificial gems. It is also used as a desulfurizing agent for petroleum gases and as an oxidation catalyst.

Cupric chloride is a yellowish to brown powder that readily absorbs moisture from the air and turns into the greenish blue hydrate, CuCl₂∙2H₂O. The hydrate is commonly prepared by passing chlorine and water in a contacting tower packed with metallic copper. The anhydrous salt is obtained by heating the hydrate to 100 °C (212 °F). Like cuprous chloride, cupric chloride is used as a catalyst in a number of organic reactions—e.g., in chlorination of hydrocarbons. In addition, it serves as a wood preservative, mordant (fixative) in the dyeing and printing of fabrics, disinfectant, feed additive, and pigment for glass and ceramics.

Cupric sulfate is a salt formed by treating cupric oxide with sulfuric acid. It forms as large, bright blue crystals containing five molecules of water (CuSO₄∙5H₂O) and is known in commerce as blue vitriol. The anhydrous salt is produced by heating the hydrate to 150 °C (300 °F). Cupric sulfate is utilized chiefly for agricultural purposes, as a pesticide, germicide, feed additive, and soil additive. Among its minor uses are as a raw material in the preparation of other copper compounds, as a reagent in analytic chemistry, as an electrolyte for batteries and electroplating baths, and in medicine as a locally applied fungicide, bactericide, and astringent.

Other important copper(II) compounds include cupric carbonate, Cu₂(OH)₂CO₃, which is prepared by adding sodium carbonate to a solution of copper sulfate and then filtering and drying the product. It is used as a colouring agent. With arsenic it forms cupric acetoarsenite (commonly known as Paris green), a wood preservative and insecticide.