Major mountain belts of the world

The Andes

The Nazca Plate, which underlies most of the southeastern Pacific, is being subducted beneath most of the west coast of South America at a rapid rate of 80 to 100 millimetres per year. A nearly continuous chain of volcanoes lines the margin of South America, and the world’s tallest volcano, Ojos del Salado (6,893 metres), is one of these peaks. The Andean range, however, is more than just a chain of volcanoes, and its highest peak, Mount Aconcagua (6,959 metres), the tallest outside Asia, is not volcanic. Crustal shortening and crustal thickening occur all along the eastern margin of the Andes by the westward underthrusting of the stable areas of Brazil and Argentina beneath the Andes at a rate of a few millimetres per year.

The southern part of the Andes in southern Chile and Argentina consists of a narrow range only 100 to 200 kilometres wide. A chain of volcanoes follows the axis of the range, but crustal thickening due to crustal shortening is a principal cause of the high range, and many of the volcanoes are built on folded and faulted sedimentary rock.

From northern Argentina to northern Peru and Ecuador, the Andes are much wider, with the widest segment across southern Bolivia. There, the mountain belt consists of two parallel ranges, the Cordillera Occidental (or Western Cordillera) and the Cordillera Oriental (or Eastern Cordillera), which surround the high plateau, the Altiplano.

More From Britannica

Is Mount Everest Really the Tallest Mountain in the World?

The volcanic chain has been constructed on thick crust and forms the Cordillera Occidental. The Brazilian shield has been underthrust beneath the Cordillera Oriental, which comprises the western edge of a wide fold and thrust belt. This fold and thrust belt is marked by north–south trending folds and north–south trending ridges and valleys in northern Argentina and southeastern Bolivia. North of the latitude where the west coast of South America bends, the trend of the Andes, including that of both cordilleras, is northwesterly parallel to the coast of Peru. The fold and thrust belt east of the Cordillera Oriental is narrower than that farther south but is well defined by a few northwesterly trending ridges and valleys.

Lying between the two cordilleras in northern Argentina, western Bolivia, and southern Peru, the Altiplano stands at an average height of about 3,800 metres. Within it lies Lake Titicaca, the highest navigable lake in the world. The Altiplano is a high arid basin that captures sediment eroded from the eastern and western cordilleras bounding it (see plateau). Older rocks that crop out within it have been folded; thus crustal shortening probably has been an important factor in creating the high elevations and the thick crust that underlies this plateau.

In Colombia, the Andean chain diverges into three separate chains, each about 100 kilometres wide. Volcanoes occur in the westernmost chain, but all three have undergone crustal shortening. For example, the easternmost of the three, which continues into Venezuela as the “Venezuelan Andes,” is being underthrust from the northwest by the Maracaibo Basin and from the southeast by the Guiana Shield underlying southeastern Venezuela. Thus the Venezuelan Andes are an intracontinental mountain belt.

The divergence of the Andes into three chains in Colombia extends northward. The western chain continues into Panama and through Central America. The central chain continues toward the Caribbean. The Venezuelan Andes intersect an east–west trending chain along the north coast of South America in Venezuela.

The Caribbean chains

The mountain range along the coast of Venezuela is a remnant of a phase when the Caribbean Sea was subducted southward beneath Venezuela and where rocks were folded along east–west axes. Right-lateral strike-slip faulting and rather slow mountain building occur there today, as much by slight vertical displacement on predominantly strike-slip faults as by slow obliquely oriented folding and thrust faulting and associated crustal shortening.

At the eastern end of the Caribbean Sea, the Lesser Antilles—volcanic islands that form a typical island arc—mark a zone where a part of the floor of the North Atlantic Ocean underthrusts that of the Caribbean Sea—namely, the Caribbean Plate. This plate has moved east relative to both North and South America at a rate of 10 to 20 millimetres per year for tens of millions of years. This displacement and the consequent overthrusting of the seafloor to the east are responsible for the volcanic arc that constitutes the Lesser Antilles as well as for the strike-slip displacement occurring in Venezuela.

Most of the major islands that define the northern margin of the Caribbean—Puerto Rico, Hispaniola, Cuba, and Jamaica—are mountainous, and these mountainous terrains, like that in northern Venezuela, are remnants of the period of convergence between North and South America and also of complicated deformation along the ancient margins of the Caribbean Plate. At present, crustal shortening occurs at only a very slow rate, if at all, on these islands.

At the western margin of the Caribbean Plate another small plate, the Cocos Plate, is being underthrust beneath Mexico and Central America. A belt of volcanoes extends from northern Panama to western Mexico, and virtually all of the highest mountains in this belt are volcanic. These volcanoes are built on thickened crust, and crustal shortening has occurred within the Central American Cordillera, but the principal tectonic process that has affected the landscape is volcanism.

The North American Cordillera

A broad mountain belt extends north from Mexico to Alaska, and it reflects both a more diverse and a more complicated history of convergence between lithospheric plates than that presently occurring in the Andes or Central America.

Subduction of oceanic lithosphere presently occurs only beneath two segments of the coast of western North America. The subduction of a small plate, the Juan de Fuca Plate, beneath northern California, Oregon, Washington, and southern British Columbia is responsible for the Cascade chain of volcanoes, which includes Mount St. Helens. The very large Pacific Plate, which underlies most of the northern and western Pacific basin, moves north-northwest with respect to North America nearly parallel to the coast, and is subducted beneath southern Alaska and the Aleutians. The volcanic chain that forms the Aleutian Islands and continues into the Alaskan peninsula to the Wrangell Mountains is a consequence of this convergence and subduction.

Most of the North American Cordillera was built between about 170 million and 40 million years ago when lithospheric plates converged with North America at rapid rates of many tens to more than 100 millimetres per year. The Juan de Fuca Plate is the last remnant of one of these plates. The others have been subducted beneath western North America and have completely disappeared. Thus, in Mesozoic and Early Cenozoic times, an Andean margin similar to that which presently bounds the west coast of South America bounded western North America.

The Coast Ranges of central and northern California, Oregon, and Washington consist of folded and faulted slices of oceanic crust and its overlying sedimentary rocks. Much of the rock that constitutes these mountains was scraped off the oceanic lithosphere at the trench just west of the continent. The Olympic Mountains in northwestern Washington, for instance, consist largely of off-scraped seamounts. The rock of such coastal mountains was intensely deformed and metamorphosed before being elevated to produce the present range. Specifically, the hard basalt that makes up much of the oceanic crust has been metamorphosed into the easily deformed rock serpentinite, which contains the weak, fibrous mineral serpentine. The gentle relief of the Coast Ranges is due in part to the weakness of serpentinite, a characteristic that gives rise to frequent landslides and rapid erosion.

A belt of granite lies inland and forms a mountainous zone from the axis of Baja California (in Mexico), through southern California, along the Sierra Nevada in the states of California and Nevada, northwestward into Idaho, and then north-northwestward along the western margin of the Canadian Rocky Mountains to Alaska. This granite belt underlay the volcanoes that marked the subduction zone in Mesozoic and Early Cenozoic times. The intrusion of this granite was most intense between 170 million and 70 million years ago during the Mesozoic Era. The Sierra Nevada of California, which contains Mount Whitney, the highest peak in the contiguous United States, is composed almost entirely of this granite.

While subduction of oceanic lithosphere occurred beneath western North America, a major fold and thrust belt developed east of the granitic belt. During Mesozoic time, the Precambrian basement of Canada and North America was underthrust westward at least 200 kilometres beneath the Andean margin, and the sedimentary rocks covering it were folded and thrust onto one another. Although present in the western United States, this fold and thrust belt is most clearly revealed in the Canadian Rockies along the border between the provinces of Alberta and British Columbia, particularly in Banff and Jasper national parks.

In sum, throughout the latter half of the Mesozoic, from about 170 million to 65.5 million years ago, the topography of western North America probably resembled that of western South America: a trench lay offshore; a belt of volcanoes underlain by granitic intrusions marked the western edge of a high range of mountains; and a fold and thrust belt lay east of the range. The tectonic history of western North America is more complicated, however, because during this period fragments of both continents and sub-oceanic plateaus were carried to the subduction zone and collided with North America. Most of the rock now found in westernmost Canada and Alaska consists of separate terrains of rock that were independently accreted to North America and that were subsequently deformed when the next such terrain collided with it. Moreover, tectonic processes occurring during the Cenozoic (since 65.5 million years ago) have been different from those that occurred earlier and have severely modified the landscape.

Beginning about 70 million to 80 million years ago, the locus of crustal shortening in the United States shifted from the fold and thrust belt, whose remnants now lie along the borders of western Utah and eastern Nevada and of western Wyoming and eastern Idaho, to eastern Utah, Colorado, and central Wyoming. Between about 70 million and 40 million years ago, thrust faulting on the margins of the Front Range in Colorado, the Laramie Mountains and the Wind River Range in Wyoming, and the Uinta Mountains in Utah, among others, allowed the uplift of blocks of Precambrian rock that are now exposed in the cores of these ranges. Together, these intracontinental ranges of block-faulted mountains form most of the Rocky Mountains of the United States.

During roughly the same period, volcanic rocks were erupted and deposited in parts of the Rockies, such as in southwestern Colorado in what are now the San Juan Mountains. The area that now forms the Colorado Plateau, in southern Utah and northern Arizona, underwent only very mild deformation in the form of small faults and folds and apparently lay at relatively low elevation. Sediment derived from the fold and thrust belt to its west and from the Rockies to its north and east was deposited on this relatively stable area. Thus, some 40 million years ago, a high range of mountains lay along the western margin of North America. This range consisted of a volcanic chain along most of its western edge and an eroded fold and thrust belt on its eastern edge. At the latitude of Wyoming, Colorado, and Utah, another belt of mountains, the present-day Rocky Mountains, lay farther east.

The topography of the western United States has been modified extensively by tectonic processes during the last 20 million years. Much of the mountainous terrain of Utah, Nevada, and California underwent large-scale crustal extension, beginning more than 40 million years ago but accelerating about 15 million years ago. The crustal extension approximately doubled the surface area of the region between central Utah and the Sierra Nevada, presumably with a reduction in the mean elevation of the mountains.

The present topography of the Basin and Range Province of North America is a direct manifestation of this crustal extension (see tectonic basins and rift valleys). The most prominent basins, such as Death Valley and Owens Valley in California, are small rift valleys that were formed during the last few million years. This phase of the crustal extension continues even today, with such basins becoming deeper and the surrounding ranges increasing in height. This condition is readily discernible in the case of Owens Valley and the Sierra Nevada. The occurrence of a major fault on the east side of the Sierras has allowed the valley to drop with respect to the mountain range, which has been tilted up toward the east.

Concurrent with this extension, the uppermost mantle beneath parts of the western United States has become hotter. The considerable height of the Colorado Plateau, for instance, appears to be the result of the warming of the underlying mantle during roughly the past 10 million years. Such mantle heating also seems to have been responsible, at least in part, for the present elevation of much of the North American Cordillera.

The one area where rapid subduction of oceanic lithosphere (more than 50 millimetres per year) has continued is southern Alaska, where the Pacific Plate is being underthrust beneath the coast. The St. Elias Mountains, the tallest in southeastern Alaska and the Yukon, appear to be the direct consequences of this convergence and rapid underthrusting. Deformation of the southern Alaskan crust extends northward several hundred kilometres to the Alaska Range, where the highest mountain in North America, Denali (Mount McKinley), is found.

North–south crustal shortening in southern Alaska occurs both by thrust faulting and by strike-slip faulting on nearly vertical, northwesterly trending planes. Denali lies adjacent to one such major strike-slip fault, the Denali Fault. The rocks that make up Denali have been displaced several tens of kilometres northwestward relative to the rocks north of the Denali Fault and a few kilometres upward. This small vertical component, compared with the large horizontal component, has created the high peak.

Volcanoes and island arcs surrounding the northwest Pacific basin

A chain of volcanoes extends from mainland Alaska down the Alaska Peninsula along the Aleutian Islands and then southwestward down the peninsula of Kamchatka in northeastern Siberia and along the Kuril Islands to Japan. The Pacific Plate is being subducted beneath this long volcanic chain. Most of the relief is the result of volcanism. The Aleutians and Kurils are volcanic islands, and for the most part the volcanoes on the continental areas of the Alaska Peninsula, Kamchatka, and Japan are built up from sea level rather than on high ranges, as is the case with the Andes. For instance, Mount Fuji, a symmetrically shaped volcanic cone, rises from a low elevation to more than 4,000 metres.

In the central part of the Japanese island of Honshu, the Circum-Pacific System diverges into two chains. One continues southward along the Izu, Bonin, and Mariana islands. These volcanic islands form island arcs where the Pacific Plate is subducted beneath the floor of the Philippine Sea to the west. Southwest of Honshu, the Ryukyu Islands are another island arc where the Philippine Sea floor is subducted beneath the Yellow Sea.

The Ryukyu island arc ends abruptly at the island of Taiwan, which is not part of the Ryukyu arc. Taiwan is a small mountainous island consisting of folded and thrusted sedimentary rocks on the southeastern margin of the Asian continent. The sedimentary rocks of Taiwan were deposited on that margin under tranquil conditions, much as sedimentary rocks have been deposited on the margins of the Atlantic Ocean. Then, in the last few million years a segment of the Asian continental margin encountered a subduction zone that dipped east-southeast. As that short segment of the margin began to be underthrust, the sedimentary rocks were scraped off its leading edge and thrust back on top of it. Thus, not only the mountains of Taiwan but also virtually the entire island consists of folded and thrust sedimentary rocks that have rapidly piled up on what had been a submerged continental shelf.

A couple of volcanic islands south of Taiwan mark the southward continuation of this subduction zone to Luzon, the large northern island of the Philippines. The mountainous landscape of the Philippine Islands is a consequence both of subduction of the South China Sea floor eastward beneath Luzon and of subduction of the Philippine Sea floor westward beneath the southern Philippine islands. Volcanism and, in Luzon, crustal shortening have built the major mountains.

A major system of island arcs extends across the Indonesian islands of Sumatra and Java and eastward almost to the island of New Guinea and then again eastward along the New Britain, Solomon, and New Hebrides (Vanuatu) chains. Virtually all of the high mountains of the Sunda, or Indonesian, arc are volcanoes, some of which are associated with particularly noteworthy eruptions. In 1883 the massive eruption of the volcano on the island of Krakatoa, in the straits between Java and Sumatra, was followed by a collapse of its caldera, which caused a huge sea wave that was recorded all around the world. The eruption in 1815 of the Tambora Volcano on Sumbawa was perhaps the greatest in recorded history. Debris from this eruption darkened the skies for several months and caused a temporary global cooling that made 1816 “the year without a summer.” The Sumbawa volcanic arc is associated with the northward subduction of the Indian Ocean floor beneath Indonesia. Similarly, the volcanic arcs of New Britain, the Solomon and New Hebrides islands, are associated with the northward subduction of the floor of the Solomon Sea and that of the Coral Sea beneath these island arcs.

A high range of mountains forms the backbone of the island of New Guinea between the Sunda and New Britain arcs. Whereas seafloor continues to be subducted beneath these arcs, the northern margin of the Australian continent has encountered the segment of the subduction zone between these arcs. The mountains of New Guinea consist of folded and faulted volcanic and sedimentary rocks. The volcanic rocks include both ancient seafloor and old island arcs that were thrust up and onto the northern margin of Australia. The sedimentary rock includes a full complement of Paleozoic, Mesozoic, and Cenozoic rock deposited in the tranquil conditions of an ancient continental shelf. Thrust faulting has elevated metamorphic rock to the crest of the high range where glaciers persist even at the Equator, while the sedimentary rock is being deformed in a fold and thrust belt along the southern margin of the range.

East of the New Hebrides Islands, the Circum-Pacific System is defined by the Tonga and Kermadec islands, volcanic islands associated with the westward subduction of the Pacific Plate. The subduction zone continues southward to the North Island of New Zealand, where volcanism is the principal tectonic process that has created mountains and relief. The mountains of the South Island of New Zealand, however, have been produced by different tectonic processes. Whereas the convergence between the Pacific Plate and the seafloor beneath the Tasman Sea manifests itself as subduction of the Pacific Plate at the Tonga-Kermadec-North Island zone, it results in crustal shortening across the South Island. The Southern Alps of New Zealand have resulted from this crustal shortening, which occurs by folding, by thrust faulting, and by vertical components of slip on predominantly strike-slip faults that trend southwest across the northern and western parts of the island. Rapid uplift, possibly as much as 10 millimetres per year, keeps pace with the rapid erosion of the easily eroded schists of the Southern Alps.

The Circum-Pacific System continues southwest of New Zealand along a submarine ridge, the Macquarie Ridge. In short, the Circum-Pacific System consists of a variety of mountain types and ranges where different tectonic processes occurring at different geologic times in the past have shaped the landscape. The grouping of these different belts into this single system is thus only a crude simplification.

The Himalayan chain

The easternmost segment of the system begins at the western end of the Sunda island arc and continues into the arcuate chain of mountains that constitute the Himalayas, which contain the highest peaks on Earth. This chain was formed as the Indian subcontinent, a passenger on the same plate that currently underthrusts the Sunda arc, collided with the southern margin of Asia and subsequently penetrated some 2,000 kilometres into the rest of Asia. As the leading edge of India, on which Paleozoic and Mesozoic sedimentary rocks had been deposited, plunged beneath southern Tibet, these rocks were scraped off the subcontinent and thrust back onto its more stable parts. With continued penetration of the Indian subcontinent, slices of the metamorphic basement of its leading edge were scraped off the rest of it and thrust onto one another, so that the rocks of the present-day Himalayan chain consist of slices of India’s ancient northern continental margin.

Physiographically, this chain can be subdivided into three parallel belts: the Lesser Himalayas, the Great Himalayas, and the Tethys Himalayas. (Some authorities prefer a subdivision into four belts, the additional one designated the Outer, or Sub-Himalayas.) The Great Himalayas are defined by an arcuate chain of the highest peaks. To the south lie the Lesser Himalayas, a belt about 100 kilometres wide with an average elevation of 1,000 to 2,000 metres that is dissected by the rivers emanating from the Great Himalayas and north of it. To the north, the Tethys Himalayas form the southern edge of the Tibetan Plateau.

The rocks of the Lesser Himalayas consist primarily of mildly metamorphosed sedimentary rock largely of Precambrian age. At present, the remainder of the Indian subcontinent underthrusts the Lesser Himalayas on a very gently dipping thrust fault, so that the rocks forming this belt are sliding over the ancient top surface of India. As a result, the uplift of the Lesser Himalayas seems to be relatively slow.

The rate of uplift in the Himalayas seems to be rapid in two parallel zones: (1) at the very front of the range where the ancient metamorphic and sedimentary rocks of the Lesser Himalayas have been thrust up and onto the young sediments, and (2) beneath the Great Himalayas. The thrust fault that carries the Himalayas onto the intact part of India is a ramp overthrust, with the steep part of the ramp dipping north beneath the Great Himalayas. Slip on this steep part allows the rapid uplift of the Great Himalayas, which in turn creates the high peaks and carries rock from deep in the crust to the Earth’s surface.

Most of the constituent rocks of the Great Himalayas are metamorphic; they once constituted the middle and lower crust of India’s ancient northern margin but were subsequently scraped off and thrust up onto the surface. The very tops of many of the peaks, however, consist of Paleozoic sedimentary rocks, which dip northward. North of the Great Himalayas, in the Tethys Himalayas, these Paleozoic rocks and the Mesozoic sedimentary rocks deposited on them along the southern edge of the Tethys Ocean have been folded and faulted into east–west ridges.

Geologically, the northern margin of the Himalayas follows the Indus River in the west and the Brahmaputra River (also called Tsang-po or Yarlung Zangbo Jiang) in the east. The last remnants of the Tethys Ocean floor can be found in what some refer to as the Indus-Tsang-po Suture Zone, where a jumble of volcanic and sedimentary rocks have been folded and thrust over one another in a narrow zone parallel to these rivers. North of this suture, a belt of granites forms the backbone of the Trans-Himalayan range. These granites were intruded into the crust of the southern margin of Asia between 120 million and 50 million years ago, when the Tethys Ocean floor was being subducted beneath southern Asia and before India collided with it.

Since India collided with Eurasia, it has penetrated 2,000 kilometres or more into the ancient Eurasian continent. The northern edge of India may have been subducted a few hundred kilometres beneath southern Tibet, but most of its penetration has been absorbed by crustal shortening north of the collision zone. The crust of the Tibetan Plateau appears to have been severely shortened; the thickness of its crust has approximately doubled. Although much of Asia underwent extensive deformation during phases of mountain building in Late Precambrian, Paleozoic, or Mesozoic times, the high altitudes of all of the mountain ranges surrounding the Tibetan Plateau, including the Pamir, Karakoram, Kunlun, Nan, Ch’i-lien (Qilian), and Lung-men (Longmen) mountains, have formed since India collided with Eurasia.

In some areas, blocks of crust undeformed since Precambrian time, such as beneath the Takla Makan (or Tarim Basin), have remained in that state, but have been displaced in response to India’s penetration. The northward displacement of the Tarim Basin has caused intracontinental crustal shortening in the Tien Shan, the aforementioned east–west trending mountain range with peaks exceeding 7,000 metres in height that lies 1,000 to 2,000 kilometres north of India’s northern edge. The Tien Shan was the site of Late Paleozoic mountain building, but by the time India collided with Eurasia erosion had planed down the ancient Tien Shan to a featureless terrain buried in its own sediment. The present elevation therefore seems to be a consequence of India’s penetration into Asia notwithstanding its great distance from India itself.

The penetration of India into Eurasia not only has caused crustal thickening in front of itself, but it also is squeezing parts of Asia eastward out of its northward path. One manifestation of this extrusion of material out of its path is the crustal shortening on the eastern margin of the Tibetan Plateau, where crustal thickening is actively occurring. The eastward displacement of crustal blocks along major strike-slip faults also seems to have caused rift systems to open in a northwest–southeast direction. The Baikal Rift Zone in Siberia and the Shansi Graben in northern China seem to have resulted from the east-southeastward extrusion of material out of India’s path. Moreover, crustal thickening in the Tibetan Plateau has ceased, and now east–west extension of the plateau contributes to the eastward extrusion. The plateau is laced with northerly trending rift zones that are bounded by northerly trending tilted, block-faulted mountains. Thus, virtually all of the tectonic landforms of Asia seem to be attributable, directly or indirectly, to India’s collision with Eurasia and its subsequent penetration into the continent.

The eastward extrusion has been facilitated by the lack of any major obstacle to the eastward displacement of South China. Minor westward displacement of material also has occurred in Afghanistan, but this process has been blocked by the collision of Arabia with southern Iran and Turkey, where to some extent the same processes have occurred as in eastern Asia.

The Zagros and Bitlis mountains

The Arabian Peninsula, its northeastern edge covered by thick sedimentary rocks, has collided with Iran and Turkey at the Zagros and Bitlis sutures to form the Zagros and Bitlis mountains. Thick layers of salt in the Arabian shield’s sedimentary rock have allowed the overlying layers to detach and fold, creating a particularly well-developed fold and thrust belt in the Zagros.

While these overlying sedimentary rocks have become detached and folded, the penetration of the Arabian shield into Iran and Turkey has built plateaus in front of it and mountain ranges on the north sides of the plateaus: these include the Kopet-Dag and Elburz ranges north of the central Iranian plateau and the Caucasus north of the Anatolian plateau. North–south crustal shortening is the principal process by which these ranges were built, but volcanism has contributed in some cases. Many of the high mountains in this area are volcanoes, including Mount Demavand, which towers over the city of Tehrān, Mount Ararat on the border of Turkey and Armenia where Noah reputedly landed, and Mount Elbrus, the highest peak in the Caucasus. The penetration of the Arabian Peninsula into eastern Turkey also has induced a westward extrusion of Anatolia, the high central part of Turkey. Thus, the same processes active in eastern Asia have affected the landscape of the western portion but only on a smaller scale.

The western segment of the system

The evolution of the western segment of the Tethyan System is the most complicated, involving more than just a collision of the African continent with parts of Europe. In Early Jurassic time (about 180 million years ago), Africa, which then lay close to Europe, moved southeastward away from it. In doing so, it caused new ocean floor (Tethys) and new continental margins to form. Much of the rock in the Alps, for instance, was deposited on this newly formed margin of southern Europe. Later, during the Cretaceous (about 100 million years ago), the divergence of Africa and Europe ceased, and convergence between them began. Mountain ranges through northern Greece (the Pindus), the Yugoslav region (the Dinaric Alps), Romania, Hungary, the Czech Republic, and Slovakia (the Carpathians), and Austria, Switzerland, France, and Italy (the Alps) all formed as the Italian peninsula—a promontory on the African continent—moved first north-northeast toward Europe at 20 to 30 millimetres per year and later northwest at a slower rate of about 10 millimetres per year. The change in the direction of motion and the irregular shape of this promontory are two reasons why the tectonic evolutions of the different ranges of Europe are very different from each other. This is unlike the situation in the Himalayas, where the history of the belt is similar throughout the 2,500-kilometre-long range.

The best-studied of these ranges is the western Alps in Switzerland and France. The western end of the Tethys Ocean floor was subducted beneath northern Italy until about 45 million to 35 million years ago. At that time, southern Europe and northern Italy collided. As the southern margin of Europe began to be subducted beneath northern Italy, the sedimentary cover deposited on the European margin of the Tethys Ocean was detached and scraped off the margin. Thick layers of relatively strong sedimentary rock (e.g., limestone and sandstone) that had been deposited on weak layers of salt (and in some cases shale) became detached and folded into huge nappes—enormous, flat layers of rock that seem to have been folded and sometimes dragged over one another like sheets of cloth pushed over a table or bed.

As northern Italy continued to override the coast of southern Europe, it not only pushed the sedimentary cover farther onto the European landmass, but it also scraped up bits and pieces of the deeper metamorphic rocks of Europe’s basement. Moreover, as the crust thickened, the increase in pressure and temperature metamorphosed the deeply buried rocks. Although there are exceptions, the northern and western parts of the Alps thus are dominated by folded, unmetamorphosed sedimentary rock, and the southern part consists largely of metamorphic rock.

As Europe was flexed down under the weight of the Alps thrust onto it, a foreland basin (see below) formed just north of the Alps: this is the Molasse Basin of northern Switzerland and southern Germany. Continental convergence in the past 10 million years has caused folding and thrusting in the Jura Mountains of northwest Switzerland and France, and displacement on ramp overthrusts beneath the front of the Alps has elevated several crystalline massifs, including the Belledonne and Mont Blanc massifs in France and the Aare (or Aar) and Gotthard massifs in Switzerland. Moreover, with the elevation of the Alps above the Po plain of northern Italy, a southward overthrusting has carried the southern part of the Alps back onto the basin there as the Italian promontory has continued to penetrate into the rest of Europe.

The Apennines, which form the backbone of the Italian peninsula, were built by the folding and faulting of sedimentary rock deposited on the peninsula. The deformation in a direction nearly perpendicular to that of the Alps was due in part to a phase of the northeastward movement of Italy toward the Adriatic coast of the Balkan Peninsula and also to the rotation of Corsica and Sardinia away from southern France and toward Italy. Thus, while the crust of the Alps was being shortened in its north–south or northwest–southeast dimension, that of the Apennines was being shortened in its northeast–southwest dimension.

While the Alps, the Apennines, and the ranges of eastern Europe were being built, different processes created mountain ranges in parts of western Europe and destroyed others in eastern Europe. For instance, while the last remnant of the Tethys Ocean, the eastern Mediterranean Sea, continues to be subducted beneath Greece and Turkey, north–south crustal extension and associated crustal thinning occurs in the Aegean area and western Turkey. This crustal thinning has already lowered the surface of what may have been a high range or plateau to below the level of the Aegean Sea and is reducing the average elevation of western Turkey.

In contrast, the western Mediterranean Sea—between Italy, Spain, and North Africa—was formed during the past 30 million years and is not a remnant of the Tethys Ocean. Since that time and concurrently with the subduction of the Tethys lithosphere beneath southern Italy, Greece, and Turkey, fragments of crust have separated from southern Europe. As these fragments drifted across the ancient westernmost end of the Tethys Ocean, they opened the new western Mediterranean basin behind them.

The collisions of these fragments with parts of Italy and Africa have contributed to the building of mountain ranges in these areas. Corsica and Sardinia swung out from southern France, and the eastern margin of Corsica, which lies below sea level, collided with Italy. The Calabrian peninsula of southern Italy once lay against Sardinia, but its southward drift opened the Tyrrhenian Sea. The volcanoes of Italy, including Mount Vesuvius near Naples and Mount Etna on Sicily, were formed as a result of the subduction of the ancient oceanic lithosphere of the Tethys beneath the Calabrian arc, which only recently collided with the rest of Sicily and the southern part of the Italian peninsula. Small fragments farther west collided with North Africa, causing crustal shortening and mountain building across northern Tunisia, Algeria, and Morocco.

The convergence of another small fragment with Europe built the Pyrenees. The Iberian Peninsula lay against the western margin of France until about 90 million or 100 million years ago, when it began to rotate into its present position and opened the Bay of Biscay behind it. As the peninsula moved toward southern France, a combination of crustal shortening and strike-slip deformation along the Pyrenees built the narrow range that separates Spain and France.