- Key People:
- Gustavus Swift
- Upton Sinclair
- Related Topics:
- carcass
- evisceration
- deboning
- slaughtering
- cold shortening
The slaughter of livestock involves three distinct stages: preslaughter handling, stunning, and slaughtering. In the United States the humane treatment of animals during each of these stages is required by the Humane Slaughter Act.
Preslaughter handling
Preslaughter handling is a major concern to the livestock industry, especially the pork industry. Stress applied to livestock before slaughter can lead to undesirable effects on the meat produced from these animals, including both PSE and DFD (see Postmortem quality problems). Preslaughter stress can be reduced by preventing the mixing of different groups of animals, by keeping livestock cool with adequate ventilation, and by avoiding overcrowding. Before slaughter, animals should be allowed access to water but held off feed for 12 to 24 hours to assure complete bleeding and ease of evisceration (the removal of internal organs).
Stunning
As the slaughter process begins, livestock are restrained in a chute that limits physical movement of the animal. Once restrained, the animal is stunned to ensure a humane end with no pain. Stunning also results in decreased stress of the animal and superior meat quality.
The three most common methods of stunning are mechanical, electrical, and carbon dioxide (CO2) gas. The end result of each method is to render the animal unconscious. Mechanical stunning involves firing a bolt through the skull of the animal using a pneumatic device or pistol. Electrical stunning passes a current of electricity through the brain of the animal. CO2 stunning exposes the animal to a mixture of CO2 gas, which acts as an anesthetic.
Slaughtering
After stunning, animals are usually suspended by a hind limb and moved down a conveyor line for the slaughter procedures. They are typically bled (a process called sticking or exsanguination) by the insertion of a knife into the thoracic cavity and severance of the carotid artery and jugular vein. This method allows for maximal blood removal from the body. At this point in the process, the slaughtering procedures begin to differ by species.
Hogs
Hogs are usually stunned by electrical means or CO2 gas. Mechanical stunning is not generally used in hogs because it may cause serious quality problems in the meat, including blood splashing (small, visible hemorrhages in the muscle tissue) in the lean and PSE meat.
Hogs are one of the few domesticated livestock animals in which the skin is left on the carcass after the slaughter process. Therefore, after bleeding, the carcasses undergo an extensive cleaning procedure. First they are placed for about five minutes in a scalding tank of water that is between 57 and 63 °C (135 and 145 °F) in order to loosen hair and remove dirt and other material (called scurf) from the skin. The carcasses are then placed in a dehairing machine, which uses rubber paddles to remove the loosened hair. After dehairing, the carcasses are suspended from a rail with hooks placed through the gambrel tendons on the hind limbs, and any residual hair is shaved and singed off the skin.
An exception to this procedure occurs in certain specialized hog slaughter facilities, such as “whole hog” sausage slaughter plants. In whole hog sausage production all the skeletal meat is trimmed off the carcass, and therefore the carcass is routinely skinned following exsanguination.
After cleaning and dehairing, heads are removed and carcasses are opened by a straight cut in the centre of the belly to remove the viscera (the digestive system including liver, stomach, bladder, and intestines and the reproductive organs), pluck (thoracic contents including heart and lungs), kidneys, and associated fat (called leaf fat). The intestines are washed and cleaned to serve as natural casings for sausage products. The carcasses are then split down the centre of the backbone into two “sides,” which are placed in a cooler (called a “hot box”) for approximately 24 hours before fabrication into meat cuts.
Cattle, calves, and sheep
These animals are usually stunned mechanically, but some sheep slaughter facilities also use electrical stunning. The feet are removed from the carcasses before they are suspended by the Achilles tendon of a hind leg for exsanguination. The carcasses are then skinned with the aid of mechanical skinners called “hide pullers.” Sheep pelts are often removed by hand in a process called “fisting.” (In older operations, hides and pelts are removed by knife.) The hides (cattle and calves) or pelts (sheep) are usually preserved by salting so that they can be tanned for leather products. Heads are removed at the first cervical vertebra, called the atlas joint. Evisceration and splitting are similar to hog procedures, except that kidney, pelvic, and heart fat are typically left in beef carcasses for grading. Carcasses are then placed in a cooler for 24 hours (often 48 hours for beef) prior to fabrication into meat cuts.