Learn about this topic in these articles:

colour printing

In photoengraving: Colourplate production
…colour printing, done with either three or four plates, each using a different colour of ink and overprinting the others, is based on a subtractive system of colours in which intermediate hues are obtained by some combination of two or more of the subtractive, or secondary, colours. The best colour…
Read More

history of printing

In printing: color printing
…a process that used the three primary colors, blue, yellow, and red, and black for outlining shapes. Using a dense grid, he engraved four metal plates, bringing out on each plate the relative importance of the color involved. The same sheet of paper then went through four successive impressions, each…
Read More
In printing: Color printing
In trichromatic printing the screened plates necessary for each of the three colors of ink are prepared by selecting the colors through filters. A fourth plate is usually used for making a print in black ink to accentuate the contours and modeling in the picture, making…
Read More

colour printing

Table of Contents

Introduction References & Edit History Related Topics

colour printing

printing

Written and fact-checked by The Editors of Encyclopaedia Britannica

Article History

Key People:: George Baxter

Related Topics:: colourplate; trichromatic printing; four-colour process printing; colour separation process; registration

See all related content

colour printing, process whereby illustrative material is reproduced in colour on the printed page. The four-colour process is used to produce a complete range of colours. In this process, the material to be reproduced is separated into three basic colours plus black, which is used for density and image contrast. The basic colours are cyan, a combination of blue and green; magenta, a combination of red and blue; and yellow, a combination of red and green. Many ink makers and printers call cyan “process blue,” magenta “process red,” and yellow “process yellow.”

After colour separation in the photoengraving or offset-platemaking process, a separate printing plate is made for each of the four colours. When printed in the proper colour (using transparent ink so that overlapping colours appear to blend) and properly registered (exactly positioned with relation to each other), these four plates can accurately reproduce the colours and shadings of original material. In most printmaking processes, illustrations for colour printing must first be subjected to the halftone process (q.v.) in order to render tonal gradations; this may be done either in the same step as the colour separation or separately. Some printing processes—such as conventional gravure and collotype—can print varying densities of ink without use of halftones.

Four-colour printing on a two-colour flatbed press requires that a sheet be passed through the press twice. A sheet-fed rotary press and a web-fed rotary press, the latter of which is fed a continuous length of paper unwinding from a roll, can print four colours in a single pass of the paper, depending on design.

A modern printing press that uses UV technology