Chromatography, as noted above, is a separation process involving two phases, one stationary and the other mobile. Typically, the stationary phase is a porous solid (e.g., glass, silica, or alumina) that is packed into a glass or metal tube or that constitutes the walls of an open-tube capillary. The mobile phase flows through the packed bed or column. The sample to be separated is injected at the beginning of the column and is transported through the system by the mobile phase. In their travel through the column, the different substances distribute themselves according to their relative affinity for the two phases. The rate of travel is dependent on the values of the distribution coefficients, the components interacting more strongly with the stationary phase requiring longer time periods for elution (complete removal from the column). Thus, separation is based on differences in distribution behavior reflected in different migration times through the column. As in repetitive extraction, the larger that the separation factor is for a pair of components, the shorter will be the column necessary to resolve them. Chromatography is thus analogous to multistage extraction, except that in chromatography there are no discontinuous steps but rather a continuous flow. At the present time, chromatography is the most significant method for separation of organic substances and, along with electrophoresis, is most widely used for biological substances.
The various chromatographic methods are characterized in terms of the mobile phase—gas: gas chromatography (GC); liquid: liquid chromatography (LC); supercritical fluid: supercritical-fluid chromatography (SFC). The methods are then further subdivided in terms of the stationary phase; thus, if the stationary phase is a solid adsorbent, there are methods such as gas-solid chromatography (GSC) and liquid-solid chromatography (LSC). Chromatography is conducted with computer-controlled instrumentation for high precision and unattended operation. In addition, a detector is frequently placed on-line after the column for either structure analysis or quantitation or both. One of the most powerful approaches of analysis now available is the on-line coupling of chromatography to mass spectrometry.
Gas chromatography is an important method owing to its speed, resolving power, and detector sensitivity. Since it depends on vaporization, this technique is best suited to compounds that can be vaporized without suffering decomposition. Many substances that normally do not easily vaporize can be chemically derivatized for successful volatilization separation by gas chromatography.
In addition to chromatography, gas-solid distribution is also widely employed for purification, using special adsorbents called molecular sieves. These materials contain pores of approximately the same dimensions as small molecules. This property can be exploited in the separation of molecules having linear structures from those having bulky structures. The former can readily enter the pores, but the latter are unable to penetrate. This is an example of an exclusion mechanism of separation (based on shape differences). Molecular sieves also play an important role in the drying of gases: water, a polar substance (i.e., its net positive and negative electrical charges are unevenly distributed within the molecule), is readily adsorbed on the particles, but gases that are less polar are not retained.
In sublimation, another method of gas-solid distribution, a solid evaporates without passing through the liquid state. Since not all substances sublime, the applicability of the method is limited.
Since the early 1970s, liquid chromatography has developed as the premier separation method for organic substances. Because the mobile phase is a liquid, the requirement for vaporization is eliminated, and therefore LC can separate a much broader range of substances than GC. Species that have been successfully resolved include inorganic ions, amino acids, drugs, sugars, oligonucleotides, and proteins. Both analytical-scale liquid chromatography with samples at the microgram-to-milligram level and preparative-scale liquid chromatography at the tens-of-grams level have been developed. In biotechnology, preparative-scale liquid chromatography is especially important for purification of proteins and peptide hormones made by recombinant technology.
One important method is liquid-solid chromatography in which the porous adsorbent is polar and separation is based on the properties of classes of compounds—e.g., amines (alkaline) from alcohols (neutral) and esters (neutral) from acids.
Liquid-solid chromatography is the oldest of the chromatographic methods. Until the mid-20th century, the experimental procedure had not changed much from its original form. After significant improvements, liquid-solid chromatography now is conducted with porous particles as small as 3–5 micrometers (0.00012–0.00020 inch) in diameter, and liquid pumps are used to drive the liquid through the particle-filled column. High resolution and fast separations are achieved since the small particles allow good efficiency with fast mobile phase velocities (one centimeter per second or higher). This technique is also important in purification, and separated substances can be automatically collected after the column using a fraction collector.
A significant liquid-solid chromatography procedure is reverse-phase chromatography, in which the liquid mobile phase is water combined with an organic solvent such as methanol or acetonitrile and the stationary phase surface is nonpolar or hydrocarbon-like. In contrast to normal-phase chromatography, where the adsorbent surface is polar, in reverse-phase chromatography the elution of substances from the column is in the order of increasing polarity. In addition, separation is based on the nonpolar aspects of the substances. In the separation of a series of peptides from human growth hormone, a recombinantly made drug, an enzyme, trypsin, is used to break peptide bonds containing the basic amino acids—arganine and lysine—to yield a specific fingerprint of the protein. Peptide mapping is a critical method for evaluating the purity of complex substances such as proteins.
Ion-exchange chromatography (IEC) is a subdivision of liquid-solid chromatography, but its importance is such that it deserves special mention. As the name implies, the process separates ions; the basis of the separation is the varying attraction of different ions in a solution to oppositely charged sites on a finely divided, insoluble substance (the ion exchanger, usually a synthetic resin). In a cation-exchange resin all the sites are negatively charged, so that only positive ions can be separated; an anion-exchange resin has positively charged sites. Ion-exchange chromatography has become one of the most important methods for separating proteins and small oligonucleotides.
An important application of ion exchange is the removal of dissolved iron, calcium, and magnesium ions from hard water. The negative sites on a cation exchanger are first neutralized with sodium ions by exposure to a strong solution of common salt (sodium chloride); when the hard water is passed through the resin, the undesirable ions in the water are replaced by sodium ions.
Liquid-solid adsorption chromatography also can be performed on thin, flat plates (thin-layer chromatography, or TLC). TLC is inexpensive and rapid but not as sensitive or efficient as column chromatography. In practice, the adsorbent is spread on a glass plate and dried. The sample is applied as a spot near one end of the plate, which is placed (vertically) in a shallow reservoir containing the mobile phase. As the mobile phase travels up the plate by capillary action, the sample dissolves in the liquid, and its components are transported up the plate to new positions at varying distances from the starting point. (For further discussion, see the article chromatography.)