In filtration, a porous material is used to separate particles of different sizes. If the pore sizes are highly uniform, separation can be fairly sensitive to the size of the particles, but the method is most commonly used to effect gross separations, as of liquids from suspended crystals or other solids. To accelerate filtration, pressure usually is applied. A series of sieves is stacked, with the screen of largest hole size at the top. The mixture of particles is placed at the top, and the assembly is agitated to facilitate the passage of the particles through successive screens. At the end of the operation, the particles are distributed among the sieves in accordance with their particle diameters.

Elutriation

In this method, the particles are placed in a vertical tube in which water (or another fluid) is flowing slowly upward. The particles fall through the water at speeds that vary with their size and density. If the flow rate of the water is slowly increased, the most slowly sinking particles will be swept upward with the fluid flow and removed from the tube. Intermediate particles will remain stationary, and the largest or densest particles will continue to migrate downward. The flow can again be increased to remove the next smallest size of particles. Thus, by careful control of flow through the tube, particles can be separated according to size.