News •
As in England, the adoption of a railed pavement in North America was originally tied to gravity operation but later was adapted for the locomotive. In the United States the earliest railed pavements were in or adjacent to Boston, where in 1807 (when it was decided to flatten the top of Beacon Hill in order to enlarge the Massachusetts statehouse) a tramway was constructed to carry gravel to the base of the hill to begin filling the Back Bay. The first railway in Canada was constructed by British military engineers in the 1820s at the Citadel at Québec city; it used a similar cable-operated tramway to ascend the heights of Cape Diamond. But it was in 1825 on the Granite Railroad just south of Boston on the side of Great Blue Hill that several of the characteristic features of American railroading, such as the swiveling truck and the four-wheel truck, were first put into use.
The earliest locomotives used in North America were of British design. In 1829 the Stourbridge Lion was the first to run on a North American railroad. But on the Delaware and Hudson Railroad, where the Stourbridge Lion ran, as on the Champlain and St. Lawrence Railroad, the first in Canada, Stephenson locomotives proved unsuited to the crude track and quickly derailed. The British locomotive had virtually no constructive impact on North American locomotives. The only residual characteristic was the 4-foot 8.5-inch gauge, which was often thought to be a misfortune in being too narrow.
It was the brute strength of American locomotives, their great tolerance of cheap and crude track, their durability, their economy of operation, and their simplicity of maintenance that determined almost from the first years of operation that there would be a distinctively American railroad sharing little with British practice. It seems reasonable to argue that once the British had shown that railroads could be made to work the Americans reinvented them for a very different terrain, economic climate, and demographic level. The creation of the American railroad was a contemporaneous but not a derivative development.
The American railroad came into existence because incomplete geographic knowledge caused the first British colonists to plant early entrepôts in what were later understood to be unfavourable locations. The uplands in central Massachusetts were already being abandoned for agricultural use when the railroad arrived in that region in the mid-1830s. Only when in the 1840s a railroad reached into the agricultural belt in the American Midwest could the port of Boston find a truly great hinterland. And by 1825 the Erie Canal had created a water connection between the Midwest and the port of New York.
Two other colonial ports mirrored the conditions in Boston. In Maryland, the rivers did not serve the colonial port at Baltimore. The Susquehanna just to the north and the Potomac just to the south had falls near their mouths. A port had grown up at Alexandria on the Virginia side of the Potomac; and the Commonwealth of Pennsylvania built a canal and later a railroad to keep inland trade from passing southward to Baltimore. In South Carolina the main port, Charleston, was, like Boston, on a short stream offering little access to the interior.
These “mislocated” colonial ports were among the largest American cities, but they were denied the easy access to the interior that seemed essential for growth as the country spread inward. The creation of the railroad offered a solution to the access problem. Competition among the Atlantic ports meant that those with the poorest river connections to the West—Baltimore, Boston, and Charleston—became the earliest and strongest proponents of railroad promotion.
The Baltimore and Ohio Railroad
The first to take an active role was Baltimore, which in the 1820s had become the second largest American city. On July 4, 1828, Baltimore merchants began the construction of a railroad from the harbour to some point, then undetermined, on the Ohio River. The results of adopting British practice were generally bad, forcing the engineers to design a railroad from scratch. Locomotives designed and built in Baltimore were stronger than those of Robert Stephenson. Leveling rods kept those locomotives on the relatively poor track, and a swiveling leading truck guided them into tight curves. On the Camden and Amboy Railroad, another pioneering line, the engineer John Jervis invented the T- cross-section rail that greatly cheapened and simplified the laying of track when combined with the wooden crosstie also first introduced in the United States. Simplicity and strength became the basic test for railroad components in North America. On cars the individual trucks were given four wheels to allow heavier loads to be carried, and the outside dimensions of cars were enlarged.
In western Maryland the engineers were faced with their steepest grades. These came to be known as the “ruling grade”—that is, the amount of locomotive power required for the transit of a line was determined by its steepest grade. Robert Stephenson had thought 1 percent was the steepest grade a locomotive could surmount. At the top of the climb over the Allegheny Front the Baltimore and Ohio (B&O) engineers had to accept a 17-mile grade of about 2.2 percent, which they managed to achieve with the stronger American engines. Adopted later as the ruling grade for the Canadian Pacific and a number of other North American lines, the 2.2 percent figure has become so fixed that it now ranks second only to standard gauge as a characteristic of the North American railroad.
The B&O was finally completed in December 1852 to Wheeling, Virginia (now in West Virginia). But by that time it was only the first of what turned out to be six trans-Appalachian railroads completed in 1851–52.