Brick compares favourably with stone as a structural material for its fire- and weather-resisting qualities and for the ease of production, transportation, and laying. The size of bricks is limited by the need for efficient drying, firing, and handling, but shapes, along with the techniques of bricklaying, have varied widely throughout history. Special shapes can be produced by molding to meet particular structural or expressive requirements (for example, wedge-shaped bricks are sometimes employed in arch construction and bricks with rounded faces in columns). Bricks may be used in construction only in conjunction with mortar, since the unit is too small, too light, and too irregular to be stabilized by weight. Each course (or layer) must be laid on an ample mortar bed with mortar filling the vertical joints. The commonest ancient Roman bricks were cut into triangles and laid with the base out and the apex set into a concrete filling that provided additional strength. Rectangular bricks are bonded either as headers (short side out) or stretchers (long side out). Standard modern types provide a ratio of width to length of slightly less than 1:2 to permit a wide variety of bonding patterns within a consistent module, or standard of measurement. Brick, which has been used since the 4th millennium bce, was the chief building material in the ancient Near East. The versatility of the medium was expanded in ancient Rome by improvements in the manufacture of both bricks and mortar and by new techniques of laying and bonding. Employed throughout the Middle Ages, brick gained greater popularity from the 16th century on, particularly in northern Europe. It was widely used in the 20th century, often for nonbearing walls in steel frame construction.

Wood

Wood is easier to acquire, transport, and work than other natural materials. All parts of a building can be efficiently constructed of wood except foundations; its disadvantage is susceptibility to fire, mold, and termites. The strength of wood in both tension and compression arises from its organic nature, which gives it an internal structure of longitudinal and radial fibres that is not impaired by cutting or long exposure. But like all organisms it contains moisture and is not uniformly strong, so it must be carefully selected and seasoned to prevent warping, splitting, and failure under loads. Wood is used in building both solid and skeletal structures. The principal solid system, called log construction, is employed when only unsophisticated cutting tools are available. Four walls must be built up together in horizontal layers of single hewn or uncut logs and jointed at the corners. The stability of the log building depends entirely on the mutual support of the walls, and the method is suitable only for simple structures of limited size. The skeletal system requires precise cutting and shaping of lumber. It provides a rigid framework of jointed or nailed members independent of the walls, which are attached to the exterior and interior surfaces after completion.

Almost all masonry buildings of the past had wood floors and coverings, since wood is the lightest, the most practical, and the most inexpensive material for spanning spaces.

The monumental architecture of the West has typically employed materials rarer than wood for expressive purposes, but the history of wood construction can be traced consistently in China, Korea, and Japan and in the domestic architecture of northern Europe and North America. Wood continues to be used in a growing number of techniques and products: heavy framing systems with compound beams and girders, interior and exterior facing with plywood and other composite panels, and arch and truss systems with laminated members that can be designed to meet particular structural demands (see wood).