The development of construction methods in iron and steel was the most important innovation in architecture since ancient times. These methods provide far stronger and taller structures with less expenditure of material than stone, brick, or wood and can produce greater unsupported spans over openings and interior or exterior spaces. The evolution of steel frame construction in the 20th century entirely changed the concept of the wall and the support.

In architecture before 1800, metals played an auxiliary role. They were used for bonding masonry (dowels and clamps), for tension members (chains strengthening domes, tie rods across arches to reinforce the vaults), and for roofing, doors, windows, and decoration. Cast iron, the first metal that could be substituted for traditional structural materials, was used in bridge building as early as 1779. Its ability to bear loads and to be produced in an endless variety of forms, in addition to its resistance to fire and corrosion, quickly encouraged architectural adaptations, first as columns and arches and afterward in skeletal structures. Because cast iron has much more compressive than tensile strength (for example, it works better as a small column than as a beam), it was largely replaced in the late 19th century by steel, which is more uniformly strong, elastic, and workable, and its high resistance in all stresses can be closely calculated.

Steel structural members are rolled in a variety of shapes, the commonest of which are plates, angles, I beams, and U-shaped channels. These members may be joined by steel bolts or rivets, and the development of welding in the 20th century made it possible to produce fused joints with less labour and materials. The result is a rigid, continuous structure in which the joint is as firm as the member and which distributes stresses between beams and columns. This is a fundamental change in architectural technique, the effect of which cannot yet be estimated.

Normally, steel must be protected against corrosion by surface coverings, but alloys such as stainless steel have been developed for exposed surfaces. Aluminum and other light metal alloys have come to be favoured for exterior construction because of their weather resistance.

Concrete

Concrete is a manufactured mixture of cement and water, with aggregates of sand and stones, which hardens rapidly by chemical combination to a stonelike, water- and fire-resisting solid of great compressive (but low tensile) strength. Because it can be poured into forms while liquid to produce a great variety of structural elements, it provides an economical substitute for traditional materials, and it has the advantages of continuity (absence of joints) and of fusing with other materials.

Concrete was employed in ancient Egypt and was highly developed by the ancient Romans, whose concrete made with volcanic-ash cement (pozzolana) permitted a great expansion of architectural methods, particularly the development of domes and vaults (often reinforced by brick ribbing) to cover large areas, of foundations, and of structures such as bridges and sewerage systems where waterproofing was essential. The technique of manufacture declined in the Middle Ages and was regained in the 18th century, but concrete had only a limited importance for architecture until the invention of reinforced concrete in the 1860s.

Reinforced concrete was developed to add the tensile strength of steel to the compressive strength of mass concrete. The metal is embedded by being set as a mesh into the forms before pouring, and in the hardened material the two act uniformly. The combination is much more versatile than either product; it serves not only for constructing rigid frames but also for foundations, columns, walls, floors, and a limitless variety of coverings, and it does not require the addition of other structural materials. Although the making of forms is a slow and costly process, the technique competes economically with steel frame construction because the mesh, composed of thin, bendable metal rods or metal fabric, employs far less steel, and concrete is itself inexpensive.

The steel reinforcement is employed to take full advantage of the plastic, or sculptural, character of concrete. It can be jointed or bent to unify supporting members with the floors and the coverings they carry. Furthermore, stresses produced in floors, domes, and vaults may be distributed within the slabs themselves to reduce load, and the diminished load may be concentrated at desired points so that the number and size of supports is greatly reduced.

Three 20th-century developments in production had a radical effect on architecture. The first, concrete-shell construction, permits the erection of vast vaults and domes with a concrete and steel content so reduced that the thickness is comparatively less than that of an eggshell. The second development, precast-concrete construction, employs bricks, slabs, and supports made under optimal factory conditions to increase waterproofing and solidity, to decrease time and cost in erection, and to reduce expansion and contraction. Finally, prestressed concrete provides bearing members into which reinforcement is set under tension to produce a live force to resist a particular load. Since the member acts like a spring, it can carry a greater load than an unstressed member of the same size.