Municipal water consumption
News •
Water consumption in a community is characterized by several types of demand, including domestic, public, commercial, and industrial uses. Domestic demand includes water for drinking, cooking, washing, laundering, and other household functions. Public demand includes water for fire protection, street cleaning, and use in schools and other public buildings. Commercial and industrial demands include water for stores, offices, hotels, laundries, restaurants, and most manufacturing plants. There is usually a wide variation in total water demand among different communities. This variation depends on population, geographic location, climate, the extent of local commercial and industrial activity, and the cost of water.
Water use or demand is expressed numerically by average daily consumption per capita (per person). In the United States the average is approximately 380 litres (100 gallons) per capita per day for domestic and public needs. Overall, the average total demand is about 680 litres (180 gallons) per capita per day, when commercial and industrial water uses are included. (These figures do not include withdrawals from freshwater sources for such purposes as crop irrigation or cooling operations at electric power-generating facilities.) Water consumption in some developing countries may average as little as 15 litres (4 gallons) per capita per day. The world average is estimated to be approximately 60 litres (16 gallons) per person per day.
In any community, water demand varies on a seasonal, daily, and hourly basis. On a hot summer day, for example, it is not unusual for total water consumption to be as much as 200 percent of the average demand. The peak demands in residential areas usually occur in the morning and early evening hours (just before and after the normal workday). Water demands in commercial and industrial districts, though, are usually uniform during the work day. Minimum water demands typically occur in the very early or predawn morning hours. Civil and environmental engineers must carefully study each community’s water use patterns in order to design efficient pumping and distribution systems.
Water treatment
Water in rivers or lakes is rarely clean enough for human consumption if it is not first treated or purified. Groundwater, too, often needs some level of treatment to render it potable. The primary objective of water treatment is to protect the health of the community. Potable water must, of course, be free of harmful microorganisms and chemicals, but public supplies should also be aesthetically desirable so that consumers will not be tempted to use water from another, more attractive but unprotected source. The water should be crystal clear, with almost no turbidity, and it should be free of objectionable colour, odour, and taste. For domestic supplies, water should not be corrosive, nor should it deposit troublesome amounts of scale and stains on plumbing fixtures. Industrial requirements may be even more stringent; many industries provide special treatment on their own premises.
The type and extent of treatment required to obtain potable water depends on the quality of the source. The better the quality, the less treatment is needed. Surface water usually needs more extensive treatment than does groundwater, because most streams, rivers, and lakes are polluted to some extent. Even in areas remote from human populations, surface water contains suspended silt, organic material, decaying vegetation, and microbes from animal wastes. Groundwater, on the other hand, is usually free of microbes and suspended solids because of natural filtration as the water moves through soil, though it often contains relatively high concentrations of dissolved minerals from its direct contact with soil and rock.
Water is treated in a variety of physical and chemical methods. Treatment of surface water begins with intake screens to prevent fish and debris from entering the plant and damaging pumps and other components. Conventional treatment of water primarily involves clarification and disinfection. Clarification removes most of the turbidity, making the water crystal clear. Disinfection, usually the final step in the treatment of drinking water, destroys pathogenic microbes. Groundwater does not often need clarification, but it should be disinfected as a precaution to protect public health. In addition to clarification and disinfection, the processes of softening, aeration, carbon adsorption, and fluoridation may be used for certain public water sources. Desalination processes are used in areas where freshwater supplies are not readily available.
Clarification
Sedimentation
Impurities in water are either dissolved or suspended. The suspended material reduces clarity, and the easiest way to remove it is to rely on gravity. Under quiescent (still) conditions, suspended particles that are denser than water gradually settle to the bottom of a basin or tank. This is called plain sedimentation. Long-term water storage (for more than one month) in reservoirs reduces the amount of suspended sediment and bacteria. Nevertheless, additional clarification is usually needed. In a treatment plant, sedimentation (settling) tanks are built to provide a few hours of storage or detention time as the water slowly flows from tank inlet to outlet. It is impractical to keep water in the tanks for longer periods, because of the large volumes that must be treated.
Sedimentation tanks may be rectangular or circular in shape and are typically about 3 metres (10 feet) deep. Several tanks are usually provided and arranged for parallel (side-by-side) operation. Influent (water flowing in) is uniformly distributed as it enters a tank. Clarified effluent (water flowing out) is skimmed from the surface as it flows over special baffles called weirs. The layer of concentrated solids that collects at the bottom of the tank is called sludge. Modern sedimentation tanks are equipped with mechanical scrapers that continuously push the sludge toward a collection hopper, where it is pumped out.
The efficiency of a sedimentation tank for removing suspended solids depends more on its surface area than on its depth or volume. A relatively shallow tank with a large surface area will be more effective than a very deep tank that holds the same volume but has a smaller surface area. Most sedimentation tanks, though, are not less than 3 metres (about 10 feet) deep, in order to provide enough room for a sludge layer and a scraper mechanism.
A technique called shallow-depth sedimentation is often applied in modern treatment plants. In this method, several prefabricated units or modules of “tube settlers” are installed near the tops of tanks in order to increase their effective surface area.