Industrial freezers
- Key People:
- Nicolas Appert
The rate at which heat is removed from a food during freezing depends on how fast heat can travel within the food and how efficiently it can be liberated from the surface of the food into the surrounding atmosphere. Industrial freezers remove heat from the surface of a food as rapidly as possible. There are several types of industrial freezers, including air-blast tunnel freezers, belt freezers, fluidized-bed freezers, plate freezers, and cryogenic freezers.
In air-blast tunnel freezers and belt freezers, precooled air at approximately −40 °C is blown over the food products. Packaged foods, such as fruits, vegetables, bakery goods, poultry, meats, and prepared meals, are usually frozen in air-blast tunnels. The packages are placed onto dollies or hand trucks and then rolled into the freezer tunnels. In a belt freezer, food is placed on a conveyor belt that moves through a freezing zone. Bakery goods, chicken parts, and meat patties are frozen using a belt freezer.
Fluidized-bed freezers are used to freeze particulate foods such as peas, cut corn, diced carrots, and strawberries. The foods are placed on a mesh conveyor belt and moved through a freezing zone in which cold air is directed upward through the mesh belt and the food particulates begin to tumble and float. This tumbling exposes all sides of the food to the cold air and minimizes the resistance to heat transfer at the surface of the food.
Plate freezers are used to freeze flat products, such as pastries, fish fillets, and beef patties, as well as irregular-shaped vegetables that are packaged in brick-shaped containers, such as asparagus, cauliflower, spinach, and broccoli. The food is firmly pressed between metal plates that are cooled to subfreezing temperatures by internally circulating refrigerants.
Cryogenic freezing is used to freeze food at an extremely fast rate. The food is moved through a spray of liquid nitrogen or directly immersed in liquid nitrogen. The liquid nitrogen boils around the food at a temperature of −196 °C (−321 °F) and extracts a large amount of heat.
Quality of frozen foods
Improper freezing or storage of foods may result in detrimental quality changes. When foods with high amounts of water are frozen slowly, they may experience a loss of fluid, called drip, upon thawing. This fluid loss causes dehydration and nutrient loss in frozen food products.
During frozen storage, the ice crystals present in foods may enlarge in size, producing undesirable changes in texture. This phenomenon is commonly observed when the storage temperature is allowed to fluctuate. For example, ice cream stored in an automatic defrosting domestic freezer becomes sandy in texture because the ice crystals increase in size as the temperature of the system fluctuates.
Improperly packaged frozen foods lose small amounts of moisture during storage, resulting in surface dehydration (commonly called freezer burn). Frozen meats with freezer burn have the appearance of brown paper and quickly become rancid. Freezer burn can be minimized by the use of tightly wrapped packages and the elimination of fluctuating temperatures during storage.
Thermal processing
Thermal processing is defined as the combination of temperature and time required to eliminate a desired number of microorganisms from a food product.
Canning
Nicolas Appert, a Parisian confectioner by trade, is credited with establishing the heat processing of foods as an industry. In 1810 he received official recognition for his process of enclosing food in bottles, corking the bottles, and placing the bottles in boiling water for various periods of time. In the same year Peter Durand received a British patent for the use of containers made of glass, pottery, tin, or other metals for the heat preservation of foods. In 1822 Ezra Daggett and Thomas Kensett announced the availability of preserved foods in tin cans in the United States. Tin-coated steel containers, made from 98.5 percent sheet steel with a thin coating of tin, soon became common. These cans had a double seamed top and bottom to provided an airtight seal and could be manufactured at high speeds.
The establishment of the canning process on a more scientific basis did not occur until 1896, when the microorganism Clostridium botulinum, with its lethal toxin causing botulism, was discovered by Émile van Ermengem.
Presterilization procedures
Selected crop varieties are grown specially for canning purposes. The harvesting schedules of the crops are carefully selected to conform to the cannery operations. A typical canning operation involves cleaning, filling, exhausting, can sealing, heat processing, cooking, labeling, casing, and storage. Most of these operations are performed using high-speed, automatic machines.
Cleaning involves the use of shakers, rotary reel cleaners, air blasters, water sprayers (as shown in ), or immersion washers. Any inedible or extraneous material is removed before washing, and only potable water is used in the cleaning systems.
Automatic filling machines are used to place the cleaned food into cans or other containers, such as glass jars or plastic pouches. When foods containing trapped air, such as leafy vegetables, are canned, the air must be removed from the cans prior to closing and sealing the lids by a process called exhausting. Exhausting is accomplished using steam exhaust hoods or by creation of a vacuum.
Immediately after exhausting, the lids are placed on the cans and the cans are sealed. An airtight seal is achieved between the lid and the rim of the can using a thin layer of gasket or compound. The anaerobic conditions prevent the growth of oxygen-requiring microorganisms. In addition, many of the spores of anaerobic microorganisms are less resistant to heat and are easily destroyed during the heat treatment.