Most calderas—large circular or oval depressions more than 1 km (0.6 mile) in diameter—have been formed by inward collapse of landforms after large amounts of magma have been expelled from underground. Many are surrounded by steep cliffs, and some are filled with lakes. The terms crater and caldera are often used synonymously, but calderas are larger than craters. A crater can occur inside a caldera, as at Taal Lake in the Philippines, but not the reverse. Calderas are often associated with large eruptions (those producing volumes of 10 cubic km [2.4 cubic miles] or more) of dacitic or rhyolitic magma that form pyroclastic plateaus.

Calderas also occur on shield volcanoes. These calderas are thought to form when large rift eruptions or lateral intrusions remove tremendous quantities of magma from the shallow magma chambers beneath the summit, leaving the ground above the chambers with no support. The collapse and refilling of calderas on active Hawaiian volcanoes probably recur many times during a volcano’s lifetime.

Whether a volcano is designated a caldera, shield volcano, or stratovolcano with a caldera depends on the principal landform feature. For example, Crater Lake in Oregon in the northwestern United States is designated a caldera, but Kilauea in Hawaii is designated a shield volcano even though it has a large summit caldera.

Complex volcanoes

Such structures are mixed landforms. In most cases, they occur because of changes either in eruptive habit or in location of the principal vent area. A stratovolcano may form a large explosion crater that later becomes filled by a lava dome, or several new cones and craters may develop on a caldera’s rim. One stratovolcano may have multiple summits when individual cones overlap one another. The Three Sisters volcanic complex in Oregon is an example of a complex volcano with three summits.

Pyroclastic cones

Pyroclastic cones (also called cinder cones or scoria cones) such as Cerro Negro in Nicaragua are relatively small, steep (about 30°) volcanic landforms built of loose pyroclastic fragments, most of which are cinder-sized. The fragments cool sufficiently during their flight through the air so that they do not weld together when they strike one another. Generally, the crater from which the cinder fragments were ejected is located in the centre of the cone. In areas with strong prevailing winds, however, the crater may be upwind of the cone. The rock type involved in pyroclastic cones is generally basalt or basaltic andesite, and the eruption type is either the moderately explosive Vulcanian or the gentler Hawaiian, which produces high lava fountains.

Some cinder cones such as Paricutín in Mexico grow during a single eruption. Paricutín rises approximately 410 metres (1,345 feet) from its base to its summit and is 1 km (0.6 mile) wide; it formed during nearly continuous eruptions from 1943 to 1952. Cinder cones also form at some vents on shield volcanoes, but these are not considered to be separate, individual volcanoes. Certain cinder cones have multiple eruptions, but, if activity continues for thousands to tens of thousands of years from the same vent, it is likely that they will develop into stratovolcanoes or complex volcanoes.

Pumice cones are structures similar to cinder cones, but they are made up of volcanic glass fragments so riddled with gas-bubble holes (vesicles) that they resemble a sponge and are very lightweight. Less common pyroclastic landforms include maars, low-relief craters often filled with water and surrounded by a rim of ejected material that was probably formed by explosive interaction of magma and groundwater; and tuff rings and tuff cones, which are landforms built of compacted pyroclastic deposits. Tuff rings and cones resemble maars, but they have higher rims and are not filled with water. Tuff rings are only about 5 metres (16 feet) high, with craters roughly at ground level. Tuff cones are higher and steeper, with craters above ground level. Punchbowl and Diamond Head on Oahu island, Hawaii, are famous examples of tuff cones.

Volcanic fields

Such areas have many geologically young cinder cones or other features that have not been individually identified as separate volcanoes. If the conduits through which magma ascends to the surface are scattered over a broad area, many short-lived volcanoes are formed rather than a major volcano with repeated eruptions. The area in which Paricutín formed is a volcanic field with dozens of prehistoric—but geologically young—cinder cones and lava flows. The most likely place for the birth of a new volcano is in a known volcanic field.

Fissure vents

These features constitute the surface trace of dikes (underground fractures filled with magma). Most dikes measure about 0.5 to 2 metres (1.5 to 6.5 feet) in width and several kilometres in length. The dikes that feed fissure vents reach the surface from depths of a few kilometres. Fissure vents are common in Iceland and along the radial rift zones of shield volcanoes.

In Iceland the volcanic vents often are long fissures parallel to the rift zone where lithospheric plates are diverging. Renewed eruptions generally occur from new parallel fractures offset by a few hundred to thousands of metres from the earlier fissures. This distribution of vents and voluminous eruptions of fluid basaltic lava usually build up a thick lava plateau rather than a single volcanic edifice. The largest effusive eruption of lava in recorded history occurred in 1783 in Iceland from the Laki fissure. This vent produced high lava fountains, a crater row 25 km (15.5 miles) long, and 565 square km (218 square miles) of basaltic lava flows with a volume of approximately 12 cubic km (2.9 cubic miles).

The radial fissure vents of Hawaiian volcanoes produce “curtains of fire” as lava fountains erupt along a portion of a fissure. These vents produce low ramparts of basaltic spatter on both sides of the fissure. More isolated lava fountains along the fissure produce crater rows of small spatter and cinder cones. The fragments that form a spatter cone are hot and plastic enough to weld together, while the fragments that form a cinder cone remain separate because of their lower temperature.